{"title":"Harken Carbon Jib Reefing \u0026 Furling Unit 2 \/ 2.5 — Installation Manual","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/om-manual-v2.css\"\u003e\u003cdiv class=\"mpom\"\u003e\n\u003cdiv class=\"om-head\"\u003e\n\u003cdiv\u003e\n\u003cspan class=\"om-tag\"\u003eINSTALLATION MANUAL\u003c\/span\u003e\u003cp class=\"om-lead\"\u003eRod and pin sizes, rigging and retrofit notes, foil length worksheet, gluing procedure, assembly, foil height, soft attachment, commissioning and the parts list for the Carbon Unit 2 \/ 2.5 jib furler.\u003c\/p\u003e\n\u003cdiv class=\"om-box\"\u003e\n\u003cdiv class=\"om-row\"\u003e\n\u003cspan\u003eDocument\u003c\/span\u003e\u003cb\u003eHarken Carbon Jib Reefing \u0026amp; Furling Unit 2 \/ 2.5 Installation Manual\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-row\"\u003e\n\u003cspan\u003eFormat\u003c\/span\u003e\u003cb\u003ePDF · 18 pages · 1.5 MB\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-row\"\u003e\n\u003cspan\u003eParts list\u003c\/span\u003e\u003cb\u003e\u003ca class=\"om-shop\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Harken-Carbon-Jib-Reefing-Furling-Unit-2-2.5-Parts-List.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePDF · 1 page · 0.1 MB ↓\u003c\/a\u003e\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-row\" style=\"border-bottom:0\"\u003e\n\u003cspan\u003eLanguage\u003c\/span\u003e\u003cb\u003eEnglish\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-acts\"\u003e\n\u003ca class=\"om-btn dl\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Harken-Carbon-Jib-Reefing-Furling-Unit-2-2.5-Installation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003csvg viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2.4\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M12 4v11\"\u003e\u003c\/path\u003e\u003cpath d=\"m7 10 5 5 5-5\"\u003e\u003c\/path\u003e\u003cpath d=\"M5 20h14\"\u003e\u003c\/path\u003e\u003c\/svg\u003e Download PDF\u003c\/a\u003e\u003ca class=\"om-btn buy\" href=\"\/collections\/harken-furlers\"\u003eView Collection\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-toc\"\u003e\n\u003ca href=\"#om-specs\"\u003eSpecifications\u003c\/a\u003e\u003ca href=\"#om-size\"\u003eFoil Length\u003c\/a\u003e\u003ca href=\"#om-install\"\u003eAssembly\u003c\/a\u003e\u003ca href=\"#om-comm\"\u003eCommissioning\u003c\/a\u003e\u003ca href=\"#om-spares\"\u003eSpare Parts\u003c\/a\u003e\u003ca href=\"#om-parts\"\u003eParts\u003c\/a\u003e\u003ca href=\"#om-products\"\u003eProducts\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Harken-Carbon-Jib-Reefing-Furling-Unit-2-2.5-Parts-List.pdf\" target=\"_blank\" rel=\"noopener\"\u003eParts List PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-img\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/HAR947.jpg?v=1747147894\" alt=\"Carbon Jib Reefing \u0026amp; Furling Unit 2 \/ 2.5\" loading=\"lazy\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-specs\"\u003e\n\u003ch2 class=\"om-h\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"om-tbl\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod sizes\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e-12, -17, -22 (7.14 mm, 8.38 mm, 9.53 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClevis pin sizes\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e5\/8\", 3\/4\" (15.9 mm, 19.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuff tape\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e#6, 6\/32\" (5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarken toggle pin-to-pin\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e3 1\/4\" (83 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoil length\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e72\" (1828.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop of feeder to clevis pin centre (E)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e52 3\/4\" (1340 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"om-grid2\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003eRigging\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo turnbuckle: attach the rod marine eye directly to the integral toggle on the 2.5; no extra toggle below the unit.\u003c\/li\u003e\n\u003cli\u003eWith a turnbuckle: it must end in a marine eye that fits the integral toggle, e.g. Navtec C560 for 5\/8\" (15.9 mm) or 3\/4\" (19 mm) pin.\u003c\/li\u003e\n\u003cli\u003eMake sure the rod terminal (usually the top eye) can be taken apart to leave a threaded nosepiece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003eRetrofits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLower end: a Navtec turnbuckle with integral toggle needs its lower body replaced by a standard marine eye body that mates with the Harken toggle.\u003c\/li\u003e\n\u003cli\u003eCross pins come in two sizes, the same as the clevis pin.\u003c\/li\u003e\n\u003cli\u003eUpper end: take the marine eye apart to leave a threaded nosepiece for the foils to slide over; if not possible, the rod must be cut.\u003c\/li\u003e\n\u003cli\u003eContact Navtec or Riggarna for the terminal procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-size\"\u003e\n\u003ch2 class=\"om-h\"\u003eFoil Length\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eB, bottom of terminal to top of foil: start from 4\" (102 mm); adjust for the turnbuckle take-up. With no turnbuckle, 1\/2\" (12 mm) is enough.\u003c\/li\u003e\n\u003cli\u003eAdd A (pin centre to bottom of terminal), B and E, subtract from the pin-to-pin length; take the number of 72\" foils closest to but not over the result.\u003c\/li\u003e\n\u003cli\u003eTop foil (C) = pin-to-pin minus A, B, D and E.\u003c\/li\u003e\n\u003cli\u003eTop foil under 8\" (203 mm): no recessed top connector. Minimum top foil 4\" (101 mm); otherwise shorten the upper 72\" (1.83 m) foil.\u003c\/li\u003e\n\u003cli\u003eLay the foils alongside the stay with the turnbuckle at its working length before cutting. Cut on a taped line with a sharp hacksaw, square the end, sand inside the bond area with 220 grit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"om-tbl\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFull foils\u003c\/th\u003e\n\u003cth\u003eInches\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e432\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e10972.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e504\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e12801.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e576\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e14630.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e648\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e16459.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e720\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e18288.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e792\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e20116.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-install\"\u003e\n\u003ch2 class=\"om-h\"\u003eAssembly and Gluing\u003c\/h2\u003e\n\u003cdiv class=\"om-grid2\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003ePreparation and Tools\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTools: sharp hacksaw, sandpaper, small triangular file, heat gun, razor knives.\u003c\/li\u003e\n\u003cli\u003eSupplies: rigging tape, blue masking tape, 9430 Hysol epoxy (supplied), acetone, glue brushes, clear packaging tape, wood alignment stick.\u003c\/li\u003e\n\u003cli\u003eSplints: 90° angle extrusion, sides about 3\/4\" (19 mm), cut in 8\" (203 mm) lengths.\u003c\/li\u003e\n\u003cli\u003eTape the foil ends; heat the rod terminal and remove the screw and nosepiece; coat the rod with mould release or wax.\u003c\/li\u003e\n\u003cli\u003eSlide on the bottom foil (holes down), the feeder (rounded groove corners down), then the 72\" foils and the connectors with bushing halves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003eGluing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix the Hysol pack for five minutes in the bag, pour it all into the cup, squeegee out the rest and keep stirring.\u003c\/li\u003e\n\u003cli\u003eCoat the inside of the foil one or two inches deep and half the connector; work the connector in and out to avoid dry spots.\u003c\/li\u003e\n\u003cli\u003eKeep all epoxy out of the sail grooves; clean with acetone.\u003c\/li\u003e\n\u003cli\u003eSplint each joint, check feeder alignment with the wood stick, cure overnight, then file and trim excess epoxy.\u003c\/li\u003e\n\u003cli\u003eHalyard swivel on with the swivel side towards the top; trim cap over the nosepiece with Superglue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"height:16px\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"om-tbl\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003cth\u003eRequirement\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGluing temperature\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eAbove 60°F (15°C); 50°F (10°C) minimum with joints warmed to no more than 100°F (38°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e1 hour at 75°F (24°C), 45 minutes at 85°F (29°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e24 hours undisturbed; 48 hours if glued below 60°F (15°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3 class=\"om-h3\" style=\"margin-top:14px\"\u003eLower unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFit the top rod eye with red Loctite on the locking screw, or upset per the maker's instructions.\u003c\/li\u003e\n\u003cli\u003eRemove the eight socket-head screws under the lower unit and the lower cap, and the three set screws at the top of the torque tube.\u003c\/li\u003e\n\u003cli\u003eSlide the lower unit onto the bottom foil; pin the turnbuckle eye to the toggle with the tapered cross pin and Smalley rings, long slot of the toggle at the bottom.\u003c\/li\u003e\n\u003cli\u003eSeat the cross pin in the housing and refit the cap with blue threadlocker on the eight screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"om-note\"\u003eThere must be clearance between the top foil and the top rigging fitting with the stay adjuster fully closed. If they touch, the unit jams or a Sta-Lok terminal can unscrew, with catastrophic failure of the spar. Check it on the ground before raising the stay.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-comm\"\u003e\n\u003ch2 class=\"om-h\"\u003eCommissioning\u003c\/h2\u003e\n\u003cdiv class=\"om-grid2\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003eSoft Attachment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLace the line three times around the torque tube or halyard swivel to capture the sail or halyard; tie off on the side opposite the sail.\u003c\/li\u003e\n\u003cli\u003eHarken uses a Hunter's Bend: holds under high tension and still unties.\u003c\/li\u003e\n\u003cli\u003eKeep the tack as close to the torque tube and as low as possible; a long tack line angles up and damages the carbon tunnels.\u003c\/li\u003e\n\u003cli\u003eBelow-deck installs: lace the tack pendant as shown; never rig a pendant directly from the carbon tunnels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"om-h3\"\u003eHalyard\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHalyard swivel within the top 4\" (100 mm) of the foil.\u003c\/li\u003e\n\u003cli\u003eHalyard pulls slightly aft, 8–10°. Dockside testing does not prove the angle; waves will wrap a wrong lead.\u003c\/li\u003e\n\u003cli\u003eHalyard firm but not tight; ease it when the boat is not in use.\u003c\/li\u003e\n\u003cli\u003eSail too short: add a permanent plastic-coated wire pendant at the head, never an adjustable one.\u003c\/li\u003e\n\u003cli\u003eRestrainer only when the masthead geometry needs it, mounted as high as possible; more than 10° deflection causes friction and foil damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"om-note\"\u003eIf the halyard wraps, do not force the unit. Furl and unfurl slightly to free it; severe wraps can only be cleared by going aloft.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-spares\"\u003e\n\u003ch2 class=\"om-h\"\u003eCarbon Unit 2 \/ 2.5 Parts\u003c\/h2\u003e\n\u003cdiv class=\"om-tbl\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart no.\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e947\u003c\/td\u003e\n\u003ctd class=\"num\"\u003ePrefeeder\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-shop\" href=\"\/products\/har947\"\u003eView part →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29364C\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eToggle 5\/8\" (15.9 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27385C\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eToggle 3\/4\" (19 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29388A\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eCross pin 5\/8\" (15.9 mm), with two H2912A bushings\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27407A\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eCross pin 3\/4\" (19 mm), with two H2912A bushings\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHFG344\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eCotter pin\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHCP1352\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eSmalley rings 5\/8\" (15.9 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHCP1062\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eSmalley rings 3\/4\" (19 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29385A\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eClevis pin 5\/8\" (15.9 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29386A\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eClevis pin 3\/4\" (19 mm)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27448BF\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eBottom (feeder) connector\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1096F\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eRegular connectors\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27508BF\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eTop bushing\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27902BF\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eTorque tube bushing\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27495A\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eConnector bushings (36)\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27904B\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eTrim cap\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29238B\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eFeeder\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-29662C\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eHalyard swivel\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH-27374EF\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eLower unit assembly\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHFG6907\u003c\/td\u003e\n\u003ctd class=\"num\"\u003eLacing lines (3), 1\/4\" (6 mm) Spectra\u003c\/td\u003e\n\u003ctd class=\"num\"\u003e\u003ca class=\"om-ask\" href=\"\/pages\/contact\"\u003eAsk us to source it →\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eHarken Carbon parts carry a one-year warranty from purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"om-h\" id=\"om-parts\"\u003eParts in this Manual We Carry\u003c\/h2\u003e\n\u003cp\u003eHarken part numbers as printed in the installation manual, matched to the genuine parts in our store.\u003c\/p\u003e\n\u003cdiv class=\"om-tbl\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eHarken part no.\u003c\/th\u003e\n\u003cth\u003eOur part\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e947\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/har947\"\u003ePre-Feeder for All Furlers\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp class=\"om-note\"\u003eNeed a part that isn't listed? \u003ca href=\"\/pages\/contact\"\u003eAsk us to source it\u003c\/a\u003e and quote the part number from the PDF.\u003c\/p\u003e\n\u003ch2 class=\"om-h\" id=\"om-products\"\u003eProducts in this Manual\u003c\/h2\u003e\n\u003c\/div\u003e","products":[{"product_id":"har947","title":"Harken Pre-Feeder for All Furlers","description":"\u003cp\u003eThe Harken Pre-Feeder for All Furlers #947 makes quick sail changes a breeze with its user-friendly design. Perfect for both casual cruisers and competitive racers, this pre-feeder is compatible with any racing foil or furling system. Enjoy the peace of mind that comes with a product that simplifies your sailing experience.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFacilitates fast and efficient sail changes\u003c\/li\u003e \u003cli\u003eCompatible with all racing foils and furling systems\u003c\/li\u003e \u003cli\u003eDurable and reliable construction for long-lasting use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCrafted from high-quality materials, the Harken Pre-Feeder is designed to withstand the rigors of sailing. Its compact and robust structure ensures seamless integration with your existing sailing gear, making it an essential addition for any sailor looking to improve their sail-handling efficiency.\u003c\/p\u003e","brand":"Harken","offers":[{"title":"Default Title","offer_id":50016342868274,"sku":"HAR947","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/HAR947.jpg?v=1747147894"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/collections\/HAR947.jpg?v=1790894262","url":"https:\/\/www.mauripro.com\/collections\/owners-manuals-harken-carbon-jib-reefing-furling-unit-2-2-5.oembed","provider":"MAURIPRO Sailing","version":"1.0","type":"link"}