{"title":"Quick MC² R5 QNC Remote Control Panel — Installation \u0026 Use Manual","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/om-manual-v2.css\"\u003e\u003cstyle\u003e.mpom .om-tbl.nw td+td{white-space:nowrap}.mpom details.om-dd{position:relative;margin:0}.mpom details.om-dd\u003esummary{list-style:none;cursor:pointer}.mpom details.om-dd\u003esummary::-webkit-details-marker{display:none}.mpom .om-dd-menu{position:absolute;left:0;top:calc(100% + 6px);min-width:100%;width:max-content;max-width:360px;background:#fff;border:1px solid #e3e5e8;border-radius:6px;box-shadow:0 8px 24px rgba(0,0,0,.14);z-index:30;padding:6px}.mpom .om-dd-menu a{display:flex;justify-content:space-between;align-items:center;gap:14px;padding:10px 12px;border-radius:4px;font-size:14px;font-weight:600;color:#2a2b2a!important;text-decoration:none!important}.mpom .om-dd-menu a:hover{background:#f5f6f8}.mpom .om-dd-menu small{font-weight:400;color:#5f6368;white-space:nowrap}\u003c\/style\u003e\u003cdiv class=\"mpom\"\u003e\n\u003cdiv class=\"om-head\"\u003e\n\u003cdiv\u003e\n\u003cspan class=\"om-tag\"\u003eINSTALLATION MANUAL\u003c\/span\u003e\u003cp class=\"om-lead\"\u003eInstallation and use of the Quick MC²X R5 QNC 5\" touch-screen remote control for MC²X gyro stabilizers: panel cut-out, wiring, home page, eco and safe modes, alarms and the mandatory maintenance lockout.\u003c\/p\u003e\n\u003cdiv class=\"om-box\"\u003e\n\u003cdiv class=\"om-row\"\u003e\n\u003cspan\u003eDocument\u003c\/span\u003e\u003cb\u003eQuick MC² R5 QNC Remote Control Panel Installation \u0026amp; Use Manual\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-row\"\u003e\n\u003cspan\u003eFormat\u003c\/span\u003e\u003cb\u003ePDF · 52 pages · 8.9 MB\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-row\" style=\"border-bottom:0\"\u003e\n\u003cspan\u003eLanguage\u003c\/span\u003e\u003cb\u003eEnglish\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-acts\"\u003e\u003cdetails class=\"om-dd\"\u003e\u003csummary class=\"om-btn dl\"\u003e\u003csvg viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2.4\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M12 4v11\"\u003e\u003c\/path\u003e\u003cpath d=\"m7 10 5 5 5-5\"\u003e\u003c\/path\u003e\u003cpath d=\"M5 20h14\"\u003e\u003c\/path\u003e\u003c\/svg\u003e Download PDF ▾\u003c\/summary\u003e\u003cdiv class=\"om-dd-menu\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Quick-MC2X-R5-QNC-Remote-Control-Installation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eInstallation Manual\u003c\/span\u003e\u003csmall\u003ePDF · 52 p.\u003c\/small\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Quick-MC2X-R5-QNC-Remote-Control-Manual-Driver-R4.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eVersion for driver R4\u003c\/span\u003e\u003csmall\u003ePDF · 52 p.\u003c\/small\u003e\u003c\/a\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-toc\"\u003e\n\u003ca href=\"#om-specs\"\u003eSpecifications\u003c\/a\u003e\u003ca href=\"#om-install\"\u003eInstallation\u003c\/a\u003e\u003ca href=\"#om-use\"\u003eOperation\u003c\/a\u003e\u003ca href=\"#om-alarms\"\u003eAlarms\u003c\/a\u003e\u003ca href=\"#om-maint\"\u003eMaintenance\u003c\/a\u003e\u003ca href=\"#om-products\"\u003eProducts\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-img\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/Quick-MC2X-R5-QNC-Remote-Control-Installation-Manual-Cover.png\" alt=\"Quick MC² R5 QNC Remote Control Panel — Installation \u0026amp; Use Manual\" loading=\"lazy\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-specs\"\u003e\n\u003ch2 class=\"om-h\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"om-tbl nw\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMC2X R5 QNC\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e5\" TFT, 800X480, 24 bit colours, white LED backlight, capacitive multi-touch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterfaces\u003c\/td\u003e\n\u003ctd\u003e1 Ethernet 10\/100 Mbit with integrated switch; 1 USB 2.0 (optional); RS-232\/422\/485 serial; 1 CAN port (1 MB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003e9÷32 VDC (wiring diagram)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse\u003c\/td\u003e\n\u003ctd\u003e12V → 2A, 24V → 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating \/ storage temperature\u003c\/td\u003e\n\u003ctd\u003e0 ÷ +50°C \/ –20° ÷ +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP67 front and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eFront 159 x 115 mm, 49 mm overall depth; drilling template: four Ø 11,5 mm holes on 139,8 x 96,2 mm centres around the central opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 60945-2002 (EMC), RoHS 2011\/65\/EU, EN 60529-2004, ISO7637-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eIt switches the stabilizer on and off, turns precession on and off and shows status, roll and precession angle, connected over CAN-BUS. Several panels can work as master and slaves (multi-display, multi-gyro).\u003c\/li\u003e\n\u003cli\u003eIn the box: R5 QNC touch 5\" panel, protective cover, power and I\/O cable (1 m \/ 3,28 ft), CAN BUS adapter cable (0,5 mt \/ 1,64 ft), J3 CAN BUS extension M\/M (12 mt \/ 39,37 ft), CAN T 5P F\/F\/F connector, CAN terminator M, adhesive gasket, 2 fixing screws, 2 fixing brackets, drilling template, manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block om-grid2\" id=\"om-install\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"om-h\"\u003eMounting the Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose a clean, flat spot the operator can reach easily, with rear access and space for the connectors; the back must stay dry. Drilling must not weaken the structure.\u003c\/li\u003e\n\u003cli\u003eKeep it at least 25 cm from the compass (printed \"bush\"), 50 cm from radio receivers, 1 m from radio transmitters and 2 m from the radar beam.\u003c\/li\u003e\n\u003cli\u003eTape the drilling template in place (it is the last page of the manual: print at 100% and check the 100 mm \/ 4\" scale bar). Drill four Ø 11.5 mm holes for the bushes and cut the central opening; deburr. An inaccurate cut spoils the gasket seal.\u003c\/li\u003e\n\u003cli\u003eFit the adhesive gasket (not below 18°C) adhesive side up on the instrument, screw the 4 stud bolts into the bushes, fit the panel and secure from behind with shaped washers, growers and nuts. Panel up to 10 mm thick: washer flaps up; thicker than 10 mm: flaps down.\u003c\/li\u003e\n\u003cli\u003ePeel off the protective film at the end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"om-h\"\u003eElectrical Connection\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep cables 1 m from radio cables (2 m from SSB).\u003c\/li\u003e\n\u003cli\u003eFit an easily reached on\/off switch and a 4A fast-blow fuse on the supply line; size cables for their length; do not power it from the engine starting batteries.\u003c\/li\u003e\n\u003cli\u003eCAN extensions must not exceed 100 meters in total. Push the female connectors on and tighten the ring nuts fully.\u003c\/li\u003e\n\u003cli\u003eSingle panel: supply cable 9÷32 VDC, CAN BUS adapter, CAN T connector, CAN M\/M extension to the inverter (J3), terminators as shown. Quick suggests cutting power to the display when the driver is not powered.\u003c\/li\u003e\n\u003cli\u003eMulti-display \/ multi-gyro: master and slave panels linked by Ethernet (an Ethernet switch 10\/100 Mbps is needed for multi-gyro, not included).\u003c\/li\u003e\n\u003cli\u003eWhile under way with the flywheel at full speed, do not cut the power: it would interrupt the precession control. On a power cut both stabilizer and panel switch off after 5 seconds and restart with the initial settings when power returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-use\"\u003e\n\u003ch2 class=\"om-h\"\u003eUsing the Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAt power-up the panel loads its programme (about 2 minutes – do not disconnect it), then touch the screen to reach HOME: status, flywheel speed percentage and natural \/ controlled precession angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eON\/OFF\u003c\/b\u003e switches the stabilizer only. \u003cb\u003ePrecession\u003c\/b\u003e can be used only with the stabilizer on: it switches on automatically at 80% speed and off below 50%; you can switch it off at any time, and for safety it switches back on automatically after 15 minutes.\u003c\/li\u003e\n\u003cli\u003eStatus: OFF (flywheel may still turn below 35 rpm), READY, SPOOLING UP, HIGH SEAS (protection mode for sea state), SPOOLING DOWN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEco mode\u003c\/b\u003e (user): two levels that reduce generator load on 90–260 Vac gyros or extend battery time on 12 Vdc gyros, with a possible slight loss of performance; switching takes about 5 seconds. The R4-driver edition gives up to 20%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafe mode\u003c\/b\u003e (automatic, multi-gyro only): keeps the system running at reduced performance when one gyro, its panel or its driver fails, is off or is in a different state.\u003c\/li\u003e\n\u003cli\u003eSetup User: brightness, alarm buzzer, units, language, day\/night. Service page: speed, DC bus voltage, power, bearing and inverter temperatures, working hours. Commissioning, Setup and Factory pages are for Quick personnel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-alarms\"\u003e\n\u003ch2 class=\"om-h\"\u003eAlarms\u003c\/h2\u003e\n\u003cp\u003eA flashing red alarm icon opens the Active Alarms page (history can be scrolled). On these alarms precession stops and the flywheel slows to a stop while the panel stays on; it all restarts when the fault clears.\u003c\/p\u003e\n\u003cdiv class=\"om-tbl nw\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarm\u003c\/th\u003e\n\u003cth\u003eProblem\u003c\/th\u003e\n\u003cth\u003eWhat to check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage too low \/ PFC fault\u003c\/td\u003e\n\u003ctd\u003ePower supply issue\u003c\/td\u003e\n\u003ctd\u003eShore \/ generator voltage: minimum higher than 90VAC or 200VAC depending on model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput current too high\u003c\/td\u003e\n\u003ctd\u003eMotor current limit reached\u003c\/td\u003e\n\u003ctd\u003eMotor power cables, motor sensor calibration, or Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor current too high \/ Input overvoltage\u003c\/td\u003e\n\u003ctd\u003eMotor current regulation failed\u003c\/td\u003e\n\u003ctd\u003eMotor power cables, motor sensor calibration, or Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStart of the motor failed\u003c\/td\u003e\n\u003ctd\u003eThe motor can't start\u003c\/td\u003e\n\u003ctd\u003eJ1 cable, motor sensor calibration, or Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal enable input \/ Communication error\u003c\/td\u003e\n\u003ctd\u003eRC and driver can't communicate\u003c\/td\u003e\n\u003ctd\u003ePower on the driver; J3 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan bus watchdog fault \/ Precession sensor fault\u003c\/td\u003e\n\u003ctd\u003eInternal error\u003c\/td\u003e\n\u003ctd\u003eContact Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver fault\u003c\/td\u003e\n\u003ctd\u003eDriver doesn't work\u003c\/td\u003e\n\u003ctd\u003eDriver and its LED; repair\/replace; Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition sensor value out of range\u003c\/td\u003e\n\u003ctd\u003eFlywheel speed\/position control failed\u003c\/td\u003e\n\u003ctd\u003eJ1 cable, or Quick Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvertemperature inverter\u003c\/td\u003e\n\u003ctd\u003eDriver at maximum temperature (ambient \u0026gt;55°C)\u003c\/td\u003e\n\u003ctd\u003eAmbient temperature at the driver (driver must be installed vertically)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvertemperature motor\u003c\/td\u003e\n\u003ctd\u003eGyro bearing\/motor at maximum temperature (ambient \u0026gt;55°C, bearing \u0026gt;90°C)\u003c\/td\u003e\n\u003ctd\u003eAmbient temperature at the gyro; bearing with bearing checker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature limit\u003c\/td\u003e\n\u003ctd\u003eGyro bearing\/motor at maximum temperature (ambient \u0026gt;55°C, bearing \u0026gt;100°C)\u003c\/td\u003e\n\u003ctd\u003eAmbient temperature at the gyro; bearing with bearing checker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp class=\"om-note\"\u003eBefore any work, disconnect the stabilizer and make sure the flywheel has stopped completely: a spinning flywheel keeps generating current.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"om-block\" id=\"om-maint\"\u003e\n\u003ch2 class=\"om-h\"\u003eMaintenance \u0026amp; Technical Lockout\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScheduled maintenance by authorised Quick personnel is mandatory after 1 year from activation or 1000 hours of bearing operation, whichever comes first; a pop-up warns from the 12th month or 900h. The wrench icon stays until the service is done.\u003c\/li\u003e\n\u003cli\u003eIf it is not done the flywheel speed is reduced: 13th month \/ 900h warning only; 14th month \/ 1000h – 20% reduction; 15th month \/ 1050h – 70%; 16th month \/ 1100h – 100%, not running. Only a Quick service centre can restore it, and missed maintenance voids the warranty.\u003c\/li\u003e\n\u003cli\u003eThe R4-driver edition lists bearing, inverter and precession checks every 1000 hours by Quick service.\u003c\/li\u003e\n\u003cli\u003eClean without solvents or fuels; do not remove the safety labels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp class=\"om-note\"\u003eNeed a part that isn't listed? \u003ca href=\"\/pages\/contact\"\u003eAsk us to source it\u003c\/a\u003e and quote the part number from the PDF.\u003c\/p\u003e\n\u003ch2 class=\"om-h\" id=\"om-products\"\u003eProducts in this Manual\u003c\/h2\u003e\n\u003c\/div\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/collections\/Quick-MC2X-R5-QNC-Remote-Control-Installation-Manual-Cover.png?v=1792714675","url":"https:\/\/www.mauripro.com\/collections\/owners-manuals-quick-mc2-r5-qnc-remote-control-panel.oembed","provider":"MAURIPRO Sailing","version":"1.0","type":"link"}