{"title":"Mount Pods - PowerPod for Simrad","description":"","products":[{"product_id":"nvp-pp4400-12","title":"NavPod PowerPod Pre-Cut for Simrad GO7-XSR, GO7-XSE, B\u0026G VULCAN7R (With Radar) - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1\" for PP4100, PP4400, PP4500, PP4600 Series; 1.8\" for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7\", 9\", 12\" and 16\" displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cb\u003eWarning: \u003c\/b\u003eThis product can expose you to chemicals including acrylonitrile, butadiene and styrene (ABS), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4400-12 | NavPod Part # PP4400-12\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348814569778,"sku":"NVP-PP4400-12","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4400-12.jpg?v=1728044082"},{"product_id":"nvp-pp4400-12-c","title":"NavPod PowerPod Pre-Cut for Simrad GO7-XSR, GO7-XSE, B\u0026G VULCAN7R (With Radar) - Carbon Series","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1\" for PP4100, PP4400, PP4500, PP4600 Series; 1.8\" for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7\", 9\", 12\" and 16\" displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cb\u003eWarning: \u003c\/b\u003eThis product can expose you to chemicals including acrylonitrile, butadiene and styrene (ABS), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4400-12-C | NavPod Part # PP4400-12-C\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348814602546,"sku":"NVP-PP4400-12-C","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4400-12-C.jpg?v=1728019758"},{"product_id":"nvp-pp4406","title":"NavPod PowerPod Pre-Cut for Simrad NSS7 evo2 or B\u0026G Zeus2 7 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4406 | NavPod Part # PP4406\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348815847730,"sku":"NVP-PP4406","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4406.jpg?v=1728046291"},{"product_id":"nvp-pp4406-c","title":"NavPod PowerPod Pre-Cut for Simrad NSS7 evo2 or B\u0026G Zeus2 7 - Carbon Series","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4406-C | NavPod Part # PP4406-C\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348815946034,"sku":"NVP-PP4406-C","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4406-C.jpg?v=1728035559"},{"product_id":"nvp-pp4407","title":"NavPod PowerPod Pre-Cut for Simrad NSS7\/B\u0026G Zeus T7 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4407 | NavPod Part # PP4407\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348816011570,"sku":"NVP-PP4407","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4407.jpg?v=1728037600"},{"product_id":"nvp-pp4407-c","title":"NavPod PowerPod Pre-Cut for Simrad NSS7\/B\u0026G Zeus T7 - Carbon Series","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4407-C | NavPod Part # PP4407-C\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348816044338,"sku":"NVP-PP4407-C","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4407-C.jpg?v=1728062330"},{"product_id":"nvp-pp4408-c","title":"NavPod PowerPod Pre-Cut for Simrad GO7, B\u0026G Vulcan 7 - Carbon Series","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4408-C | NavPod Part # PP4408-C\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348816077106,"sku":"NVP-PP4408-C","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4408-C.jpg?v=1728021986"},{"product_id":"nvp-pp4408","title":"NavPod PowerPod Pre-Cut for Simrad GO7, B\u0026G Vulcan 7 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4408 | NavPod Part # PP4408\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348816142642,"sku":"NVP-PP4408","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4408.jpg?v=1728026262"},{"product_id":"nvp-pp4500-09","title":"NavPod PowerPod Pre-Cut for Simrad NSS7 evo3, B\u0026G Zeus3 7 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSS7 evo3, B\u0026amp;G Zeus3 7 #PP4500-09 is a great choice for securely mounting your marine electronics. It offers the sleek look of a flush mount with the added benefit of a swivel base, perfectly angled for easy viewing. Built to withstand the harshest marine conditions, it ensures your devices stay protected and reliable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlush mount design with swivel base for optimal viewing angles.\u003c\/li\u003e\n\u003cli\u003eDurable ABS construction with high gloss white finish.\u003c\/li\u003e\n\u003cli\u003eWatertight seal with a double gasket system for protection.\u003c\/li\u003e\n\u003cli\u003eLarge base opening for easy wire management and protection.\u003c\/li\u003e\n\u003cli\u003eSecurity wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe PowerPod is constructed from durable ABS material, ensuring longevity and UV stability in marine environments. It features a high gloss white finish that complements most marine settings. Compatible with pre-cut models tailored for Simrad NSS7 evo3 and B\u0026amp;G Zeus3 7 displays, it offers a sleek flush mount solution while providing ample space for wires and connectors through its large base opening. This design not only protects against water intrusion but also prevents damage from UV exposure or accidental snags. Additionally, it's backed by a 10-year warranty, reinforcing its quality and durability.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4500-09 | Mfr. Part # PP4500-09 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348828004658,"sku":"NVP-PP4500-09","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4500-09.jpg?v=1728019430"},{"product_id":"nvp-pp4500-09-c","title":"NavPod PowerPod Pre-Cut for Simrad NSS7 evo3, B\u0026G Zeus3 7, Mercury VesselView 703 - Carbon Series","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1\" for PP4100, PP4400, PP4500, PP4600 Series; 1.8\" for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7\", 9\", 12\" and 16\" displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cb\u003eWarning: \u003c\/b\u003eThis product can expose you to chemicals including acrylonitrile, butadiene and styrene (ABS), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4500-09-C | NavPod Part # PP4500-09-C\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348828365106,"sku":"NVP-PP4500-09-C","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4500-09-C.jpg?v=1728030851"},{"product_id":"nvp-pp4600-06","title":"NavPod PowerPod Pre-Cut for Simrad NSS9 evo3, B\u0026G Zeus3 9 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSS9 evo3, B\u0026amp;G Zeus3 9 #PP4600-06 is designed to keep your marine electronics secure and in prime condition, even in harsh marine environments. It offers a sturdy and clean mounting solution with a convenient 20-degree viewing angle and a swivel base for easy adjustments. The pre-cut face makes installation a breeze, ensuring your fishfinder or chartplotter is snugly fitted and well protected.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable ABS construction with UV stability for long-lasting use.\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for excellent watertight sealing.\u003c\/li\u003e\n\u003cli\u003eNickel Chrome-Plated Stainless Steel tamper-resistant screws for added security.\u003c\/li\u003e\n\u003cli\u003eLarge base opening for easy wire concealment and protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConstructed from robust ABS, this NavPod PowerPod combines durability and style with its high gloss white finish. The double gasket system ensures superior water resistance, while the large base opening accommodates wires and connectors, keeping them safe from water and UV exposure. Compatible with 9-inch displays from major marine electronic manufacturers, this PowerPod ensures a clutter-free and secure setup on your boat.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4600-06 | Mfr. Part # PP4600-06 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348857233714,"sku":"NVP-PP4600-06","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4600-06.jpg?v=1728026185"},{"product_id":"nvp-pp4600-04","title":"NavPod PowerPod Pre-Cut for Simrad NSS9 evo2, B\u0026G Zeus2 9 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4600-04 | NavPod Part # PP4600-04\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348858577202,"sku":"NVP-PP4600-04","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4600-04.jpg?v=1728038799"},{"product_id":"nvp-pp4800-13","title":"NavPod PowerPod Pre-Cut for Simrad GO9, B\u0026G Vulcan 9 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad GO9, B\u0026amp;G Vulcan 9 #PP4800-13 is perfect for those looking to securely mount their marine electronics. It offers a 20-degree viewing angle and the versatility of a swivel base, combining both practicality and style. Plus, it provides the clean look of flush mounting that sailors love.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSturdy and secure mount with a swivel base for versatile positioning.\u003c\/li\u003e\n\u003cli\u003eAvailable in high gloss white, ensuring a sleek and modern appearance.\u003c\/li\u003e\n\u003cli\u003eConstructed from durable ABS material for longevity and UV stability.\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for an excellent watertight seal.\u003c\/li\u003e\n\u003cli\u003ePre-cut face allows easy flush mounting of your fishfinder\/chartplotter.\u003c\/li\u003e\n\u003cli\u003eLarge base opening for convenient wiring and connector access.\u003c\/li\u003e\n\u003cli\u003eTamper-resistant with Nickel Chrome-Plated Stainless Steel screws.\u003c\/li\u003e\n\u003cli\u003e10-year warranty on all Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMade from durable ABS, this PowerPod is designed to withstand harsh marine conditions, offering UV stability and a high gloss finish. It features a pre-cut face to fit your fishfinder\/chartplotter, with a wide base opening of 1.8 inches for models like the PP4800. This design ensures all wiring is well-protected from water, UV exposure, and physical damage.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4800-13 | Mfr. Part # PP4800-13 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348912841010,"sku":"NVP-PP4800-13","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4800-13.jpg?v=1728041767"},{"product_id":"nvp-pp4808","title":"NavPod PowerPod Pre-Cut for Simrad NSS8 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP4808 | NavPod Part # PP4808\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348913529138,"sku":"NVP-PP4808","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP4808.jpg?v=1728047872"},{"product_id":"nvp-pp5050-26","title":"NavPod PowerPod Pre-Cut for Simrad GO12-XSE, B\u0026G VULCAN12R - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad GO12-XSE, B\u0026amp;G VULCAN12R #PP5050-26 is your go-to solution for a neat and secure flush mount for your marine electronics. It offers a sleek design combined with the functionality of a swivel base, making it a reliable choice for your fishfinder or chartplotter. Designed with boaters in mind, this PowerPod ensures your device is always at the right angle and protected from harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSturdy and secure flush mounting with a 20-degree viewing angle\u003c\/li\u003e\n\u003cli\u003eConstructed from durable ABS material with UV stability\u003c\/li\u003e\n\u003cli\u003eDouble gasket system ensures a watertight seal\u003c\/li\u003e\n\u003cli\u003ePre-cut face for easy installation of fishfinder\/chartplotter\u003c\/li\u003e\n\u003cli\u003eLarge base opening for concealed wiring and connector protection\u003c\/li\u003e\n\u003cli\u003eIncludes security wrench and tamper-resistant screws\u003c\/li\u003e\n\u003cli\u003eAvailable in high gloss white\u003c\/li\u003e\n\u003cli\u003e10-year warranty on all Gen3 NavPods\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCrafted from durable ABS material, this PowerPod offers a high gloss finish that resists UV damage, ensuring long-lasting durability. Measuring at a size compatible with 12\" displays like Simrad GO12-XSE and B\u0026amp;G VULCAN12R, it features a pre-cut face for seamless device installation. The large base opening (1.8\" diameter) allows for easy wiring and connection, safeguarding them from water, UV exposure, and accidental damage. It’s perfect for all major marine electronics displays ranging from 7\" to 16\".\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5050-26 | Mfr. Part # PP5050-26 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348926603570,"sku":"NVP-PP5050-26","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5050-26.jpg?v=1728058047"},{"product_id":"nvp-pp5059","title":"NavPod PowerPod Pre-Cut for Simrad NSE8, B\u0026G Zeus Z8 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5059 | NavPod Part # PP5059\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348928045362,"sku":"NVP-PP5059","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5059.jpg?v=1728015854"},{"product_id":"nvp-pp5200-14","title":"NavPod PowerPod Pre-Cut for Simrad NSS12 evo3, B\u0026G Zeus3 12 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSS12 evo3, B\u0026amp;G Zeus3 12 #PP5200-14 is designed to make your marine electronics installation simple and secure. With a neat flush mount, this PowerPod offers a perfect balance of style and functionality, giving you a better angle for viewing your fishfinder\/chartplotter. Say goodbye to clutter with this sturdy and sleek solution for your boating needs.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e Benefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlush mount design for a clean, professional look\u003c\/li\u003e\n\u003cli\u003e20-degree viewing angle for optimal visibility\u003c\/li\u003e\n\u003cli\u003eDurable ABS construction with UV stability\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for a secure watertight seal\u003c\/li\u003e\n\u003cli\u003eSwivel base for flexible positioning\u003c\/li\u003e\n\u003cli\u003eLarge opening for easy wire management\u003c\/li\u003e\n\u003cli\u003eSecurity wrench and tamper-resistant screws included\u003c\/li\u003e\n\u003cli\u003e10-year warranty on all Gen3 NavPods\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConstructed from sturdy ABS material, the NavPod PowerPod is designed to withstand harsh marine conditions, ensuring your electronics remain protected. The high-gloss white finish provides UV stability, while the double gasket system offers excellent water resistance. Compatible with 12-inch displays from major marine electronics brands, this PowerPod is not only functional but also adds a touch of elegance to your vessel.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5200-14 | Mfr. Part # PP5200-14 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348947247410,"sku":"NVP-PP5200-14","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5200-14.jpg?v=1728048552"},{"product_id":"nvp-pp5202","title":"NavPod PowerPod Pre-Cut for Simrad NSS12 evo2, B\u0026G Zeus2 12 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5202 | NavPod Part # PP5202\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348947902770,"sku":"NVP-PP5202","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5202.jpg?v=1728014994"},{"product_id":"nvp-pp5063","title":"NavPod PowerPod Pre-Cut for Simrad NSS12 - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1'€³ for PP4100, PP4400, PP4500, PP4600 Series; 1.8'€³ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7'€³, 9'€³, 12'€³ and 16'€³ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5063 | NavPod Part # PP5063\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348957274418,"sku":"NVP-PP5063","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5063.jpg?v=1728030208"},{"product_id":"nvp-pp5064","title":"NavPod PowerPod Pre-Cut for Simrad NSE12, B\u0026G Zeus Z12 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSE12, B\u0026amp;G Zeus Z12 #PP5064 is a solid choice for securely mounting your marine electronics. It effortlessly combines style with practicality, ensuring your gear is always set at the perfect angle. Plus, it’s designed to withstand the harshest marine conditions with a watertight seal that keeps everything dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePre-cut design for easy installation of Simrad NSE12 and B\u0026amp;G Zeus Z12 displays\u003c\/li\u003e\n\u003cli\u003e20-degree viewing angle for optimal display clarity\u003c\/li\u003e\n\u003cli\u003eDurable ABS construction with a high gloss white finish\u003c\/li\u003e\n\u003cli\u003eSwivel base for adjustable positioning\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for a reliable watertight seal\u003c\/li\u003e\n\u003cli\u003eLarge opening for concealing wires and connectors\u003c\/li\u003e\n\u003cli\u003eTamper-resistant screws with a security wrench included\u003c\/li\u003e\n\u003cli\u003e10-year warranty for long-term peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCrafted from tough ABS material, this NavPod is both durable and stylish, featuring a high gloss white finish that complements any marine setup. Its dimensions are perfect for accommodating Simrad NSE12 and B\u0026amp;G Zeus Z12 displays, while the swivel base allows for flexible positioning. The innovative double gasket system ensures a watertight seal, protecting your electronics from water and UV damage. Additionally, it includes a large base opening for discreetly running wires, enhancing both functionality and aesthetics.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5064 | Mfr. Part # PP5064 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348957307186,"sku":"NVP-PP5064","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5064.jpg?v=1728035205"},{"product_id":"nvp-pp5920-10","title":"NavPod PowerPod Pre-Cut for Simrad NSO evo2, NSO evo3 16\", B\u0026G Zeus2, Zeus3 Glass Helm 16\" - White","description":"\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1\" for PP4100, PP4400, PP4500, PP4600 Series; 1.8\" for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7\", 9\", 12\" and 16\" displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cb\u003eWarning: \u003c\/b\u003eThis product can expose you to chemicals including acrylonitrile, butadiene and styrene (ABS), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5920-10 | NavPod Part # PP5920-10\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348962877746,"sku":"NVP-PP5920-10","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5920-10.jpg?v=1728033092"},{"product_id":"nvp-pp5920-04","title":"NavPod PowerPod Pre-Cut for Simrad NSS16 evo2, B\u0026G Zeus2 16 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSS16 evo2, B\u0026amp;G Zeus2 16 #PP5920-04 is designed to securely hold your marine electronics at a convenient 20-degree viewing angle. This PowerPod combines the sleek look of flush mounting with the functionality of a swivel base, making it a great choice for your boat's navigation setup. With its sturdy build, it ensures that your equipment stays protected even in harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a sleek, clean look with flush mounting capability\u003c\/li\u003e\n\u003cli\u003eSturdy construction with UV-stable, high gloss white finish\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for an excellent watertight seal\u003c\/li\u003e\n\u003cli\u003ePre-cut face for easy installation of fishfinder\/chartplotter\u003c\/li\u003e\n\u003cli\u003eLarge opening for running and concealing wires and connectors\u003c\/li\u003e\n\u003cli\u003eIncludes security wrench and tamper-resistant screws\u003c\/li\u003e\n\u003cli\u003eBacked by a 10-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConstructed from durable ABS material, this PowerPod is specifically pre-cut for the Simrad NSS16 evo2 and B\u0026amp;G Zeus2 16 systems. It features a high gloss white finish with UV stability, ensuring long-lasting performance. The base has a generous opening of 1.8 inches, providing ample space to route and protect wires and connectors from environmental damage. Designed to fit most 16-inch displays from major marine electronics brands, this PowerPod ensures your equipment is both stylish and secure.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5920-04 | Mfr. Part # PP5920-04 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348962943282,"sku":"NVP-PP5920-04","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5920-04.jpg?v=1728017459"},{"product_id":"nvp-pp5920-03","title":"NavPod PowerPod Pre-Cut for Simrad NSS16 evo3, B\u0026G Zeus3 16 - White","description":"\u003cp\u003eThe NavPod PowerPod Pre-Cut for Simrad NSS16 evo3, B\u0026amp;G Zeus3 16 #PP5920-03 is your go-to solution for securely mounting your marine electronics with style and functionality. Designed to keep your chartplotter safe from harsh marine environments, this PowerPod offers a sleek, clean look that’s both robust and easy on the eyes. Its unique swivel base and 20-degree viewing angle make it perfect for any boating adventure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSturdy and secure mount with a 20-degree viewing angle.\u003c\/li\u003e\n\u003cli\u003eSleek design with a clean look of flush mounting.\u003c\/li\u003e\n\u003cli\u003eAvailable in a high gloss white with UV stability.\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for excellent watertight seal.\u003c\/li\u003e\n\u003cli\u003eLarge base opening for easy wire and connector management.\u003c\/li\u003e\n\u003cli\u003eIncludes security wrench and tamper-resistant screws for added security.\u003c\/li\u003e\n\u003cli\u003eBacked by a 10-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConstructed from durable ABS material, the NavPod PowerPod is designed to withstand the toughest wet boating conditions. It features a large opening in the base (1.8 inches) for wire management, ensuring protection from water, UV exposure, and accidental damage. Compatible with most 16-inch displays from major marine electronics manufacturers, this PowerPod keeps your gear secure and functional.\u003c\/p\u003e\u003cb\u003eUsage\u003c\/b\u003e\u003cp\u003eIdeal for boaters who want a reliable and stylish way to mount their electronics, the NavPod PowerPod is perfect for both recreational and professional use. Its design makes it easy to install, allowing you to focus on enjoying your time on the water.\u003c\/p\u003e\u003cp\u003eOur Part # NVP-PP5920-03 | Mfr. Part # PP5920-03 \u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":49348963074354,"sku":"NVP-PP5920-03","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/NVP-PP5920-03.jpg?v=1728061837"}],"url":"https:\/\/www.mauripro.com\/collections\/sailboat-instruments-housing-pods-for-simrad-powerpod.oembed?page=2","provider":"MAURIPRO","version":"1.0","type":"link"}