{"title":"Side Power Retractable Thrusters","description":null,"products":[{"product_id":"sidsrv80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRV80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRV80185T12V | Side-Power (Sleipner) Part # SRV80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349179834674,"sku":"SIDSRV80185T12V","price":8933.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRV80185T12V.jpg?v=1728048745"},{"product_id":"sidsrv80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRV80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRV80185T24V | Side-Power (Sleipner) Part # SRV80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349179867442,"sku":"SIDSRV80185T24V","price":8933.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRV80185T24V.jpg?v=1728032986"},{"product_id":"sidsrv100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRV100 Electric 24V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRV100185T24V | Side-Power (Sleipner) Part # SRV100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349186388274,"sku":"SIDSRV100185T24V","price":9917.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRV100185T24V.jpg?v=1728020798"},{"product_id":"sidsrv100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRV100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRV100185T12V | Side-Power (Sleipner) Part # SRV100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349186421042,"sku":"SIDSRV100185T12V","price":9917.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRV100185T12V.jpg?v=1728031819"},{"product_id":"sidsr80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SR80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSR80185T12V | Side-Power (Sleipner) Part # SR80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349191827762,"sku":"SIDSR80185T12V","price":11155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSR80185T12V.jpg?v=1728032781"},{"product_id":"sidsr80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SR80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSR80185T24V | Side-Power (Sleipner) Part # SR80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349191860530,"sku":"SIDSR80185T24V","price":11155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSR80185T24V.jpg?v=1728036285"},{"product_id":"sidsrvp80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRVP80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRVP80185T12V | Side-Power (Sleipner) Part # SRVP80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349194252594,"sku":"SIDSRVP80185T12V","price":11681.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRVP80185T12V.jpg?v=1728054706"},{"product_id":"sidsrvp80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRVP80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRVP80185T24V | Side-Power (Sleipner) Part # SRVP80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349194285362,"sku":"SIDSRVP80185T24V","price":11681.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRVP80185T24V.jpg?v=1728041150"},{"product_id":"sidsr100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SR100 Electric 24V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSR100185T24V | Side-Power (Sleipner) Part # SR100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349194645810,"sku":"SIDSR100185T24V","price":11729.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSR100185T24V.jpg?v=1728061300"},{"product_id":"sidsr100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SR100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSR100185T12V | Side-Power (Sleipner) Part # SR100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349194744114,"sku":"SIDSR100185T12V","price":11729.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSR100185T12V.jpg?v=1728055131"},{"product_id":"sidsrl80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRL80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRL80185T24V | Side-Power (Sleipner) Part # SRL80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349197168946,"sku":"SIDSRL80185T24V","price":12314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRL80185T24V.jpg?v=1728034818"},{"product_id":"sidsrl80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRL80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRL80185T12V | Side-Power (Sleipner) Part # SRL80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349197201714,"sku":"SIDSRL80185T12V","price":12314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRL80185T12V.jpg?v=1728063014"},{"product_id":"sidsrvp100185t1v","title":"Side-Power (Sleipner) Bow Thrusters - SRVP100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRVP100185T1V | Side-Power (Sleipner) Part # SRVP100\/185T-1V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349199036722,"sku":"SIDSRVP100185T1V","price":12733.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRVP100185T1V.jpg?v=1728061150"},{"product_id":"sidsrl100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRL100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRL100185T12V | Side-Power (Sleipner) Part # SRL100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349202149682,"sku":"SIDSRL100185T12V","price":13201.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRL100185T12V.jpg?v=1728038835"},{"product_id":"sidsrl100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRL100 Electric 24V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRL100185T24V | Side-Power (Sleipner) Part # SRL100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349202215218,"sku":"SIDSRL100185T24V","price":13201.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRL100185T24V.jpg?v=1728061792"},{"product_id":"sidsrp80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRP80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRP80185T24V | Side-Power (Sleipner) Part # SRP80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349202870578,"sku":"SIDSRP80185T24V","price":13308.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRP80185T24V.jpg?v=1728022491"},{"product_id":"sidsrp100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SRP100 Electric 24V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Counter-Rotating Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRP100185T24V | Side-Power (Sleipner) Part # SRP100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349205655858,"sku":"SIDSRP100185T24V","price":13892.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRP100185T24V.jpg?v=1728015011"},{"product_id":"sidsrp80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRP80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRP80185T12V | Side-Power (Sleipner) Part # SRP80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349206868274,"sku":"SIDSRP80185T12V","price":14253.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRP80185T12V.jpg?v=1728045930"},{"product_id":"sidsrp100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SRP100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Counter-Rotating Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRP100185T12V | Side-Power (Sleipner) Part # SRP100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349208768818,"sku":"SIDSRP100185T12V","price":14681.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRP100185T12V.jpg?v=1728022078"},{"product_id":"sidsrlp80185t2v","title":"Side-Power (Sleipner) Bow Thrusters - SRLP80 Electric 24V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Counter-Rotating Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRLP80185T2V | Side-Power (Sleipner) Part # SRLP80\/185T-2V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349209719090,"sku":"SIDSRLP80185T2V","price":14944.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRLP80185T2V.jpg?v=1728040627"},{"product_id":"sidsrlp80185t1v","title":"Side-Power (Sleipner) Bow Thrusters - SRLP80 Electric 12V 176.4 lbf (80.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Counter-Rotating Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRLP80185T1V | Side-Power (Sleipner) Part # SRLP80\/185T-1V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349213225266,"sku":"SIDSRLP80185T1V","price":15675.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRLP80185T1V.jpg?v=1728032612"},{"product_id":"sidsrlp100185t1v","title":"Side-Power (Sleipner) Bow Thrusters - SRLP100 Electric 12V 220.5 lbf (100.0 kgf)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable \u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Counter-Rotating Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSRLP100185T1V | Side-Power (Sleipner) Part # SRLP100\/185T-1V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349213651250,"sku":"SIDSRLP100185T1V","price":16045.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSRLP100185T1V.jpg?v=1728036560"},{"product_id":"siderv130250t24v","title":"Side-Power (Sleipner) Bow Thrusters - ERV130 Electric 24V 286.6 lbf (130.0 kgf)","description":"\u003cp\u003eThe ERV130 is a highly efficient, compact, lightweight retract thruster suitable for boats between 42-62 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV130250T24V | Mfr. Part # ERV130\/250T-24V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349230723378,"sku":"SIDERV130250T24V","price":25184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV130250T24V.jpg?v=1728027862"},{"product_id":"siderv130250t48v","title":"Side-Power (Sleipner) Bow Thrusters - ERV130 Electric 48V 286.6 lbf (130.0 kgf)","description":"\u003cp\u003eThe ERV130 is a highly efficient, compact, lightweight retract thruster suitable for boats between 42-62 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV130250T48V | Mfr. Part # ERV130\/250T-48V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349230788914,"sku":"SIDERV130250T48V","price":25184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV130250T48V.jpg?v=1728057578"},{"product_id":"siderv170250tc2v","title":"Side-Power (Sleipner) Bow Thrusters - ERV170 Electric 24V 374.8 lbf (170.0 kgf)","description":"\u003cp\u003eThe ERV170 is a highly efficient, compact, lightweight retract thruster suitable for boats between 50-70 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV170 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV170250TC2V | Mfr. Part # ERV170\/250TC-2V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349231837490,"sku":"SIDERV170250TC2V","price":25773.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV170250TC2V.jpg?v=1728060345"},{"product_id":"siderv170250tc4v","title":"Side-Power (Sleipner) Bow Thrusters - ERV170 Electric 48V 374.8 lbf (170.0 kgf)","description":"\u003cp\u003eThe ERV170 is a highly efficient, compact, lightweight retract thruster suitable for boats between 50-70 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV170 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV170250TC4V | Mfr. Part # ERV170\/250TC-4V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349231903026,"sku":"SIDERV170250TC4V","price":25773.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV170250TC4V.jpg?v=1728028387"},{"product_id":"siderl130250t24v","title":"Side-Power (Sleipner) Bow Thrusters - ERL130 Electric 24V 286.6 lbf (130.0 kgf)","description":"\u003cp\u003eThe ERL130 is a highly efficient, compact, lightweight retract thruster suitable for boats between 42-62 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERL130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is compact with bevel gears, making it perfect for boats with limited height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERL130250T24V | Mfr. Part # ERL130\/250T-24V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232099634,"sku":"SIDERL130250T24V","price":26611.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERL130250T24V.jpg?v=1728059820"},{"product_id":"siderl130250t48v","title":"Side-Power (Sleipner) Bow Thrusters - ERL130 Electric 48V 286.6 lbf (130.0 kgf)","description":"\u003cp\u003eThe ERL130 is a highly efficient, compact, lightweight retract thruster suitable for boats between 42-62 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERL130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is compact with bevel gears, making it perfect for boats with limited height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERL130250T48V | Mfr. Part # ERL130\/250T-48V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232132402,"sku":"SIDERL130250T48V","price":26611.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERL130250T48V.jpg?v=1728036855"},{"product_id":"siderv210250tc2v","title":"Side-Power (Sleipner) Bow Thrusters - ERV210 Electric 24V 463.0 lbf (210.0 kgf)","description":"\u003cp\u003eThe ERV210 is a highly efficient, compact, lightweight retract thruster suitable for boats between 55-78 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV210 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV210250TC2V | Mfr. Part # ERV210\/250TC-2V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232853298,"sku":"SIDERV210250TC2V","price":27809.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV210250TC2V.jpg?v=1728032914"},{"product_id":"siderv210250tc4v","title":"Side-Power (Sleipner) Bow Thrusters - ERV210 Electric 48V 463.0 lbf (210.0 kgf)","description":"\u003cp\u003eThe ERV210 is a highly efficient, compact, lightweight retract thruster suitable for boats between 55-78 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV210 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV210250TC4V | Mfr. Part # ERV210\/250TC-4V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232886066,"sku":"SIDERV210250TC4V","price":27809.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV210250TC4V.jpg?v=1728045448"},{"product_id":"siderl170250tc2v","title":"Side-Power (Sleipner) Bow Thrusters - ERL170 Electric 24V 374.8 lbf (170.0 kgf)","description":"\u003cp\u003eThe ERL70 is a highly efficient, compact, lightweight retract thruster suitable for boats between 50-70 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERL170 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is compact with bevel gears, making it perfect for boats with limited height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERL170250TC2V | Mfr. Part # ERL170\/250TC-2V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232918834,"sku":"SIDERL170250TC2V","price":27909.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERL170250TC2V.jpg?v=1728050733"},{"product_id":"siderl170250tc4v","title":"Side-Power (Sleipner) Bow Thrusters - ERL170 Electric 48V 374.8 lbf (170.0 kgf)","description":"\u003cp\u003eThe ERL70 is a highly efficient, compact, lightweight retract thruster suitable for boats between 50-70 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERL170 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is compact with bevel gears, making it perfect for boats with limited height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERL170250TC4V | Mfr. Part # ERL170\/250TC-4V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349232984370,"sku":"SIDERL170250TC4V","price":27909.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERL170250TC4V.jpg?v=1728015816"},{"product_id":"siderv300300tc4v","title":"Side-Power (Sleipner) Bow Thrusters - ERV300 Electric 48V 661.5 lbf (300.0 kgf)","description":"\u003cp\u003eThe ERV300 is a highly efficient, compact, lightweight retract thruster suitable for boats between 72-100 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eERV300 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster. The unit is designed for vertical installation, making it perfect for boats with available height space.\u003c\/p\u003e\u003cp\u003eOur Part # SIDERV300300TC4V | Mfr. Part # ERV300\/300TC-4V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349240029490,"sku":"SIDERV300300TC4V","price":44313.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDERV300300TC4V.jpg?v=1728059120"}],"url":"https:\/\/www.mauripro.com\/collections\/side-power-retractable-thrusters.oembed?page=2","provider":"MAURIPRO","version":"1.0","type":"link"}