{"title":"Sleipner Bow \u0026 Stern Thrusters","description":null,"products":[{"product_id":"sidse25110s","title":"Side-Power (Sleipner) Bow Thrusters - SE25 Electric 12V 55.1 lbf (25.0 kgf) (SE25\/110S)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE25110S | Side-Power (Sleipner) Part # SE25\/110S\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349010391346,"sku":"SIDSE25110S","price":1539.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE25110S.jpg?v=1728025379"},{"product_id":"sidse30125s","title":"Side-Power (Sleipner) Bow Thrusters - SE30 Electric 12V 66.1 lbf (30.0 kgf) (SE30\/125S)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE30125S | Side-Power (Sleipner) Part # SE30\/125S\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349028872498,"sku":"SIDSE30125S","price":1812.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE30125S.jpg?v=1728022338"},{"product_id":"sidse40125s","title":"Side-Power (Sleipner) Bow Thrusters - SE40 Electric 12V 88.2 lbf (40.0 kgf) (SE40\/125S)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE40125S | Side-Power (Sleipner) Part # SE40\/125S\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349034672434,"sku":"SIDSE40125S","price":1919.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE40125S.jpg?v=1728030608"},{"product_id":"sidse50140s12v","title":"Side-Power (Sleipner) Bow Thrusters - SE50 Electric 12V 110.2 lbf (50.0 kgf) (SE50\/140S-12V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE50140S12V | Side-Power (Sleipner) Part # SE50\/140S-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349047943474,"sku":"SIDSE50140S12V","price":2211.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE50140S12V.jpg?v=1728050278"},{"product_id":"sidse50140s24v","title":"Side-Power (Sleipner) Bow Thrusters - SE50 Electric 24V 110.2 lbf (50.0 kgf) (SE50\/140S-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE50140S24V | Side-Power (Sleipner) Part # SE50\/140S-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349047976242,"sku":"SIDSE50140S24V","price":2211.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE50140S24V.jpg?v=1728043138"},{"product_id":"sidse60185s12v","title":"Side-Power (Sleipner) Bow Thrusters - SE60 Electric 12V 132.3 lbf (60.0 kgf) (SE60\/185S-12V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE60185S12V | Side-Power (Sleipner) Part # SE60\/185S-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349054333234,"sku":"SIDSE60185S12V","price":2367.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE60185S12V.jpg?v=1728059171"},{"product_id":"sidse60185s24v","title":"Side-Power (Sleipner) Bow Thrusters - SE60 Electric 24V 132.3 lbf (60.0 kgf) (SE60\/185S-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE60185S24V | Side-Power (Sleipner) Part # SE60\/185S-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349054366002,"sku":"SIDSE60185S24V","price":2367.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE60185S24V.jpg?v=1728059122"},{"product_id":"sidse30125sip","title":"Side-Power (Sleipner) Bow Thrusters - SE30 Electric 12V 66.1 lbf (30.0 kgf) IP (SE30\/125S-IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE30125SIP | Side-Power (Sleipner) Part # SE30\/125S-IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349079204146,"sku":"SIDSE30125SIP","price":3146.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE30125SIP.jpg?v=1728059249"},{"product_id":"sidse40125sip","title":"Side-Power (Sleipner) Bow Thrusters - SE40 Electric 12V 88.2 lbf (40.0 kgf) IP (SE40\/125S-IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE40125SIP | Side-Power (Sleipner) Part # SE40\/125S-IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349086380338,"sku":"SIDSE40125SIP","price":3292.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE40125SIP.jpg?v=1728045336"},{"product_id":"sidse80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SE80 Electric 12V 176.4 lbf (80.0 kgf) (SE80\/185T-12V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE80185T12V | Side-Power (Sleipner) Part # SE80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349091787058,"sku":"SIDSE80185T12V","price":3390.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE80185T12V.jpg?v=1728053840"},{"product_id":"sidse80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SE80 Electric 24V 176.4 lbf (80.0 kgf) (SE80\/185T-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE80185T24V | Side-Power (Sleipner) Part # SE80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349091819826,"sku":"SIDSE80185T24V","price":3390.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE80185T24V.jpg?v=1728046815"},{"product_id":"sidse50140s12ip","title":"Side-Power (Sleipner) Bow Thrusters - SE50 Electric 12V 110.2 lbf (50.0 kgf) IP (SE50\/140S-12IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE50140S12IP | Side-Power (Sleipner) Part # SE50\/140S-12IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349093130546,"sku":"SIDSE50140S12IP","price":3448.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE50140S12IP.jpg?v=1728026045"},{"product_id":"sidse60185s12ip","title":"Side-Power (Sleipner) Bow Thrusters - SE60 Electric 12V 132.3 lbf (60.0 kgf) IP (SE60\/185S-12IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE60185S12IP | Side-Power (Sleipner) Part # SE60\/185S-12IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349093687602,"sku":"SIDSE60185S12IP","price":3458.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE60185S12IP.jpg?v=1728059910"},{"product_id":"sidse60185s24ip","title":"Side-Power (Sleipner) Bow Thrusters - SE60 Electric 24V 132.3 lbf (60.0 kgf) IP (SE60\/185S-24IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE60185S24IP | Side-Power (Sleipner) Part # SE60\/185S-24IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349093720370,"sku":"SIDSE60185S24IP","price":3458.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE60185S24IP.jpg?v=1728029043"},{"product_id":"sidsx35-12v-50mm","title":"Side-Power (Sleipner) Stern Thrusters - SX35 12V 77.1 lbf (35.0 kgf) 50mm Hull (SX35-12V-50MM)","description":"\u003cp\u003eThe SX35 12V 77.1 lbf (35.0 kgf) 50mm Hull #SX35-12V-50MM is a compact and efficient stern thruster designed for easy installation on boats up to 37 feet. With 35 kg of thrust, it's perfect for enhancing maneuverability without the need for GRP work. Its intelligent power control ensures energy efficiency and long run times, making it a reliable choice for sailors.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnergy-efficient with long run times.\u003c\/li\u003e\n\u003cli\u003eSimple installation, no GRP work required.\u003c\/li\u003e\n\u003cli\u003eIntelligent power control for optimal performance.\u003c\/li\u003e\n\u003cli\u003eCompact design suitable for various hull shapes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis thruster offers 35 kg of thrust and is compatible with 12V systems. Its versatile design fits hulls up to 50mm thick, making it an adaptable choice for a wide range of boats. The SX35 is built for durability and ease of use, ensuring a stress-free boating experience.\u003c\/p\u003e\u003cp\u003eOur Part # SIDSX35-12V-50MM | Mfr. Part # SX35-12V-50MM \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349112070450,"sku":"SIDSX35-12V-50MM","price":4189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX35-12V-50MM.jpg?v=1728042817"},{"product_id":"sidsx35-12v-150mm","title":"Side-Power (Sleipner) Stern Thrusters - SX35 12V 77.1 lbf (35.0 kgf) 150mm Hull (SX35-12V-150MM)","description":"\u003cp\u003eSX35\/140 - 12V -150mmw\/Controller\u003c\/p\u003e\u003cp\u003eOur Part # SIDSX35-12V-150MM | Side-Power (Sleipner) Part # SX35-12V-150MM\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349118722354,"sku":"SIDSX35-12V-150MM","price":4510.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX35-12V-150MM.jpg?v=1728031549"},{"product_id":"sidse100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SE100 Electric 12V 220.5 lbf (100.0 kgf) (SE100\/185T-12V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE100185T12V | Side-Power (Sleipner) Part # SE100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349119770930,"sku":"SIDSE100185T12V","price":4549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE100185T12V.jpg?v=1728055665"},{"product_id":"sidse100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SE100 Electric 24V 220.5 lbf (100.0 kgf) (SE100\/185T-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE100185T24V | Side-Power (Sleipner) Part # SE100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349119836466,"sku":"SIDSE100185T24V","price":4549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE100185T24V.jpg?v=1728038987"},{"product_id":"sidse80185t12ip","title":"Side-Power (Sleipner) Bow Thrusters - SE80 Electric 12V 176.4 lbf (80.0 kgf) IP (SE80\/185T-12IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE80185T12IP | Side-Power (Sleipner) Part # SE80\/185T-12IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349123539250,"sku":"SIDSE80185T12IP","price":4686.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE80185T12IP.jpg?v=1728016378"},{"product_id":"sidse80185t24ip","title":"Side-Power (Sleipner) Bow Thrusters - SE80 Electric 24V 176.4 lbf (80.0 kgf) IP (SE80\/185T-24IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE80185T24IP | Side-Power (Sleipner) Part # SE80\/185T-24IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349123604786,"sku":"SIDSE80185T24IP","price":4686.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE80185T24IP.jpg?v=1728051280"},{"product_id":"sidsx50-12v-50mm","title":"Side-Power (Sleipner) Stern Thrusters - SX50 12V 110.2 lbf (50.0 kgf) 50mm Hull (SX50-12V-50MM)","description":"\u003cp\u003eThe SX50 is Side-Power (Sleipner)'s most compact thruster yet. Its versatile design allows for installation on boats of any hull shape up to 37 feet, providing 35 kg of thrust.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnergy-efficient and long run times.\u003c\/li\u003e\n\u003cli\u003eEasy to mount, with no GRP work necessary.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSX50 is also available in PRO with variable speed control.\u003c\/p\u003e\u003cp\u003eOur Part # SIDSX50-12V-50MM | Side-Power (Sleipner) Part # SX50-12V-50MM\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349124161842,"sku":"SIDSX50-12V-50MM","price":4725.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX50-12V-50MM.jpg?v=1728047999"},{"product_id":"sidsep40125s","title":"Side-Power (Sleipner) Bow Thrusters - SEP40 Electric 12V 110.2 lbf (50.0 kgf) (SEP40\/125S)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP40125S | Side-Power (Sleipner) Part # SEP40\/125S\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349124423986,"sku":"SIDSEP40125S","price":4734.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP40125S.jpg?v=1728022233"},{"product_id":"sidsep50140s12v","title":"Side-Power (Sleipner) Bow Thrusters - SEP50 Electric 12V 110.2 lbf (50.0 kgf) (SEP50\/140S-12V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP50140S12V | Side-Power (Sleipner) Part # SEP50\/140S-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349128126770,"sku":"SIDSEP50140S12V","price":4822.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP50140S12V.jpg?v=1728060084"},{"product_id":"sidsep60185s12v","title":"Side-Power (Sleipner) Bow Thrusters - SEP60 Electric 12V 132.3 lbf (60.0 kgf) (SEP60\/185S-12V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP60185S12V | Side-Power (Sleipner) Part # SEP60\/185S-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349132288306,"sku":"SIDSEP60185S12V","price":4968.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP60185S12V.jpg?v=1728059738"},{"product_id":"sidsep60185s24v","title":"Side-Power (Sleipner) Bow Thrusters - SEP60 Electric 24V 132.3 lbf (60.0 kgf) (SEP60\/185S-24V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP60185S24V | Side-Power (Sleipner) Part # SEP60\/185S-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349132321074,"sku":"SIDSEP60185S24V","price":4968.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP60185S24V.jpg?v=1728063156"},{"product_id":"sidse120215t24v","title":"Side-Power (Sleipner) Bow Thrusters - SE120 Electric 24V 264.6 lbf (120.0 kgf) (SE120\/215T-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE120215T24V | Side-Power (Sleipner) Part # SE120\/215T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349132714290,"sku":"SIDSE120215T24V","price":4997.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE120215T24V.jpg?v=1728057280"},{"product_id":"sidsx50-12v-150mm","title":"Side-Power (Sleipner) Stern Thrusters - SX50 12V 110.2 lbf (50.0 kgf) 150mm Hull (SX50-12V-150MM)","description":"\u003cp\u003eThe SX50 is Side-Power (Sleipner)'s most compact thruster yet. Its versatile design allows for installation on boats of any hull shape up to 37 feet, providing 35 kg of thrust.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnergy-efficient and long run times.\u003c\/li\u003e\n\u003cli\u003eEasy to mount, with no GRP work necessary.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSX50 is also available in PRO with variable speed control.\u003c\/p\u003e\u003cp\u003eOur Part # SIDSX50-12V-150MM | Side-Power (Sleipner) Part # SX50-12V-150MM\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349133435186,"sku":"SIDSX50-12V-150MM","price":5041.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX50-12V-150MM.jpg?v=1728029702"},{"product_id":"sidsep80185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SEP80 Electric 24V 176.4 lbf (80.0 kgf) (SEP80\/185T-24V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP80185T24V | Side-Power (Sleipner) Part # SEP80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349142118706,"sku":"SIDSEP80185T24V","price":5494.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP80185T24V.jpg?v=1728061398"},{"product_id":"sidse130250t12v","title":"Side-Power (Sleipner) Bow Thrusters - SE130 Electric 12V 286.6 lbf (130.0 kgf) (SE130\/250T-12V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE130250T12V | Side-Power (Sleipner) Part # SE130\/250T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349144740146,"sku":"SIDSE130250T12V","price":5738.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE130250T12V.jpg?v=1728041369"},{"product_id":"sidse130250t24v","title":"Side-Power (Sleipner) Bow Thrusters - SE130 Electric 24V 286.6 lbf (130.0 kgf) (SE130\/250T-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE130250T24V | Side-Power (Sleipner) Part # SE130\/250T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349144772914,"sku":"SIDSE130250T24V","price":5738.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE130250T24V.jpg?v=1728017538"},{"product_id":"sidsep80185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SEP80 Electric 12V 176.4 lbf (80.0 kgf) (SEP80\/185T-12V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP80185T12V | Side-Power (Sleipner) Part # SEP80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349144936754,"sku":"SIDSEP80185T12V","price":5757.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP80185T12V.jpg?v=1728051523"},{"product_id":"sidsep40125s1ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP40 Electric 12V 88.2 lbf (40.0 kgf) IP (SEP40\/125S-1IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP40125S1IP | Side-Power (Sleipner) Part # SEP40\/125S-1IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349147590962,"sku":"SIDSEP40125S1IP","price":5942.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP40125S1IP.jpg?v=1728020251"},{"product_id":"sidse150215t24v","title":"Side-Power (Sleipner) Bow Thrusters - SE150 Electric 24V 330.7 lbf (150.0 kgf) (SE150\/215T-24V)","description":"\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE150215T24V | Side-Power (Sleipner) Part # SE150\/215T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349147820338,"sku":"SIDSE150215T24V","price":5952.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE150215T24V.jpg?v=1728021946"},{"product_id":"sidsep5040s12ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP50 Electric 12V 110.2 lbf (50.0 kgf) IP (SEP50\/140S-1IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP5040S12IP | Side-Power (Sleipner) Part # SEP50\/140S-1IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349149884722,"sku":"SIDSEP5040S12IP","price":6128.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP5040S12IP.jpg?v=1728061208"},{"product_id":"sidse100185t12ip","title":"Side-Power (Sleipner) Bow Thrusters - SE100 Electric 12V 220.5 lbf (100.0 kgf) IP (SE100\/185T-12IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE100185T12IP | Side-Power (Sleipner) Part # SE100\/185T-12IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349152473394,"sku":"SIDSE100185T12IP","price":6352.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE100185T12IP.jpg?v=1728062229"},{"product_id":"sidse100185t24ip","title":"Side-Power (Sleipner) Bow Thrusters - SE100 Electric 24V 220.5 lbf (100.0 kgf) IP (SE100\/185T-24IP)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSingle Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller models. With more than 60.000 single propeller thrusters in use, the Side-Power (Sleipner) single series system has proven its reliability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSE100185T24IP | Side-Power (Sleipner) Part # SE100\/185T-24IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349152506162,"sku":"SIDSE100185T24IP","price":6352.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSE100185T24IP.jpg?v=1728037067"},{"product_id":"sidsep60185s1ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP60 Electric 12V 132.3 lbf (60.0 kgf) IP (SEP60\/185S-1IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP60185S1IP | Side-Power (Sleipner) Part # SEP60\/185S-1IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349152768306,"sku":"SIDSEP60185S1IP","price":6381.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP60185S1IP.jpg?v=1728024499"},{"product_id":"sidsep100185t24v","title":"Side-Power (Sleipner) Bow Thrusters - SEP100 Electric 24V 220.5 lbf (100.0 kgf) (SEP100\/185T-24V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP100185T24V | Side-Power (Sleipner) Part # SEP100\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349155651890,"sku":"SIDSEP100185T24V","price":6605.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP100185T24V.jpg?v=1728018876"},{"product_id":"sidsep100185t12v","title":"Side-Power (Sleipner) Bow Thrusters - SEP100 Electric 12V 220.5 lbf (100.0 kgf) (SEP100\/185T-12V)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP100185T12V | Side-Power (Sleipner) Part # SEP100\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349158699314,"sku":"SIDSEP100185T12V","price":6926.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP100185T12V.jpg?v=1728047820"},{"product_id":"sidsep80185t1ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP80 Electric 12V 176.4 lbf (80.0 kgf) IP (SEP80\/185T-1IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP80185T1IP | Side-Power (Sleipner) Part # SEP80\/185T-1IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349159813426,"sku":"SIDSEP80185T1IP","price":6995.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP80185T1IP.jpg?v=1728064404"},{"product_id":"sidsep80185t2ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP80 Electric 24V 176.4 lbf (80.0 kgf) IP (SEP80\/185T-2IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP80185T2IP | Side-Power (Sleipner) Part # SEP80\/185T-2IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349159878962,"sku":"SIDSEP80185T2IP","price":6995.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP80185T2IP.jpg?v=1728064000"},{"product_id":"side130250t24v","title":"Side-Power (Sleipner) Bow Thrusters - E130 Electric 24V 286.6 lbf (130.0 kgf) IP (E130\/250T-24V)","description":"\u003cp\u003eThe E130 is a highly efficient, compact, lightweight thruster suitable for boats between 42-63 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eE130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster.\u003c\/p\u003e\u003cp\u003eOur Part # SIDE130250T24V | Mfr. Part # E130\/250T-24V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349171314994,"sku":"SIDE130250T24V","price":8037.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDE130250T24V.jpg?v=1728047648"},{"product_id":"side130250t48v","title":"Side-Power (Sleipner) Bow Thrusters - E130 Electric 48V 286.6 lbf (130.0 kgf) IP (E130\/250T-48V)","description":"\u003cp\u003eThe E130 is a highly efficient, compact, lightweight thruster suitable for boats between 42-63 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eE130 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster.\u003c\/p\u003e\u003cp\u003eOur Part # SIDE130250T48V | Mfr. Part # E130\/250T-48V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349171347762,"sku":"SIDE130250T48V","price":8037.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDE130250T48V.jpg?v=1728018165"},{"product_id":"side150215t24v","title":"Side-Power (Sleipner) Bow Thrusters - E150 Electric 24V 330.7 lbf (150.0 kgf) IP (E150\/215T-24V)","description":"\u003cp\u003eThe E150 is a highly efficient, compact, lightweight thruster suitable for boats between 44-64 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eE150 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster.\u003c\/p\u003e\u003cp\u003eOur Part # SIDE150215T24V | Mfr. Part # E150\/215T-24V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349173313842,"sku":"SIDE150215T24V","price":8198.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDE150215T24V.jpg?v=1728039462"},{"product_id":"side150215t48v","title":"Side-Power (Sleipner) Bow Thrusters - E150 Electric 48V 330.7 lbf (150.0 kgf) IP (E150\/215T-48V)","description":"\u003cp\u003eThe E150 is a highly efficient, compact, lightweight thruster suitable for boats between 44-64 feet. The integrated inverter for variable speed control makes for a quick and easy installation.\u003c\/p\u003e\u003cp\u003eE150 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster.\u003c\/p\u003e\u003cp\u003eOur Part # SIDE150215T48V | Mfr. Part # E150\/215T-48V \u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349173444914,"sku":"SIDE150215T48V","price":8198.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDE150215T48V.jpg?v=1728061041"},{"product_id":"sidsep100185t1ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP100 Electric 12V 220.5 lbf (100.0 kgf) IP (SEP100\/185T-1IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP100185T1IP | Side-Power (Sleipner) Part # SEP100\/185T-1IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349173641522,"sku":"SIDSEP100185T1IP","price":8203.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP100185T1IP.jpg?v=1728055575"},{"product_id":"sidsep100185t2ip","title":"Side-Power (Sleipner) Bow Thrusters - SEP100 Electric 24V 220.5 lbf (100.0 kgf) IP (SEP100\/185T-2IP)","description":"\u003cp\u003e\u003cb\u003eS-Link™:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eS-Link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRound, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup.\u003c\/li\u003e\n\u003cli\u003eUnlimited number of commands or information transferred on a single cable.\u003c\/li\u003e\n\u003cli\u003eUser feedback on the panel.\u003c\/li\u003e\n\u003cli\u003eIntelligent troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePRO - Variable Speed Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA PRO thruster system with variable speed control allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently.\u003c\/p\u003e\u003cp\u003eBy limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical hold-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making docking truly a one-person job. PRO thrusters are the best choice for joystick interaction.\u003c\/p\u003e\u003cp\u003eA PRO system contains three main elements - a control panel, a power control unit, and a DC electric thruster - all tied together with the S-link™ control system. All mechanical and main electric parts are from the well-proven thruster range produced by Side-Power (Sleipner) for many years.\u003c\/p\u003e\u003cp\u003eAll of Side-Power (Sleipner)'s 12 and 24 volt DC electric thrusters can be enabled for variable speed control by authorized Side-Power (Sleipner) service personnel, even past models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"\"mechanical\"\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"\"Mechanical\"\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSEP100185T2IP | Side-Power (Sleipner) Part # SEP100\/185T-2IP\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349173674290,"sku":"SIDSEP100185T2IP","price":8203.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSEP100185T2IP.jpg?v=1728051958"},{"product_id":"sidsx80185t12v","title":"Side-Power (Sleipner) Stern Thrusters - SX80 12V 176.4 lbf (80.0 kgf) (SX80\/185T-12V)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSX80185T12V | Side-Power (Sleipner) Part # SX80\/185T-12V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349174657330,"sku":"SIDSX80185T12V","price":8281.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX80185T12V.jpg?v=1728051913"},{"product_id":"sidsx80185t24v","title":"Side-Power (Sleipner) Stern Thrusters - SX80 24V 176.4 lbf (80.0 kgf) (SX80\/185T-24V)","description":"\u003cp\u003e\u003cb\u003eIP - Ignition Protected:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eTo provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.\u003c\/p\u003e\u003cp\u003eThe other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGalvanic Separation:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe gearhouse \/ drive legs of most Side-Power (Sleipner) DC Electric thrusters are now fully galvanically isolated \/ separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAchieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.\u003c\/li\u003e\n\u003cli\u003eAvailable on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSealed Drive Lubrication:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSealed gearleg with long-life \"mechanical\" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\"Mechanical\" seals with surfaces of ceramic and carbon for ultimate security against water intrusion.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTwin Propellers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ-Propeller:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power (Sleipner) propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise reductions of up to 75% measured in controlled environments.\u003c\/li\u003e\n\u003cli\u003eThe expected and tested normal noise reduction in average installations: 20-40%\u003c\/li\u003e\n\u003cli\u003eWill be delivered on all Side-Power (Sleipner) models except models with 300 mm and 385 mm tunnel diameter.\u003c\/li\u003e\n\u003cli\u003eUpgrade kits are available for most SP series thrusters with special adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eIntelligent Power Control:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Side-Power (Sleipner) unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides delay between drive directions.\u003c\/li\u003e\n\u003cli\u003eMonitors solenoid functions to reduce the chance of solenoid lock-in.\u003c\/li\u003e\n\u003cli\u003eWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur Part # SIDSX80185T24V | Side-Power (Sleipner) Part # SX80\/185T-24V\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349174690098,"sku":"SIDSX80185T24V","price":8281.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSX80185T24V.jpg?v=1728015659"},{"product_id":"sidsmex95s","title":"Side-Power (Sleipner) Bow Thrusters - EX95 Electric 24V 209.4 lbf (95.0 kgf) (EX95S)","description":"\u003cp\u003eThe EX series Bow Thruster can be installed in most boats between 20 and 45 feet. These pod thrusters are an excellent choice where a tunnel thruster cannot fit, or as an extremely compact stern thruster. They are also especially good for retrofitting. The flexible mounting at the extreme bow of the boat hull allows a deeper position underwater which creates an optimal leverage compared to conventional thrusters.\u003c\/p\u003e\u003cli\u003eOptimally streamlined design\u003c\/li\u003e\u003cli\u003eHydrodynamic shape, very short flow-channel and ideal placement reduce water resistance\u003c\/li\u003e\u003cli\u003eEasy installation, only requires the drilling three small holes to install\u003c\/li\u003e\u003cli\u003eLower install cost due to simplified install\u003c\/li\u003e\u003cli\u003eReduced noise based on optimal tunnel shape and submerged motor\u003c\/li\u003e\u003cli\u003eLonger duration based on water cooling of motor and housing\u003c\/li\u003e\u003cli\u003eSpace saving, less interior equipment needed \u003c\/li\u003e\u003cp\u003eOur Part # SIDSMEX95S | Side-Power (Sleipner) Part # SMEX95S\u003c\/p\u003e","brand":"Sleipner","offers":[{"title":"Default Title","offer_id":49349177639218,"sku":"SIDSMEX95S","price":8768.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4908\/2930\/files\/SIDSMEX95S.jpg?v=1728033355"}],"url":"https:\/\/www.mauripro.com\/collections\/sleipner-bow-stern-thrusters.oembed","provider":"MAURIPRO","version":"1.0","type":"link"}