Kit Includes: Switches and 12-volt control box and circuit breaker.
Designed for cruising boats from
35' (10.6 m) to 60' (18 m),
electric furling is a headsail system
that helps you get the most out of your
boat, while letting you comfortably
reef, furl, and set sails from the cockpit
with the push of a button.
High-Strength Materials, Sculpted Design
The torque tube, motor, and gear housing are deep-saturation Hardkote-anodized,
UV-stabilized aluminum. The sculpted gear box and streamlined motor housing is sealed
with high-quality lip seals. The motor mounts vertically into pulpits, clearing anchor tackle
and providing low windage.
High-Torque, High-Efficiency Motor
The motor is a permanent magnet design and features high torque and low power
consumption. Inside, the hardened steel gears are permanently lubricated. The reversible drive
uses a high-reduction worm gear set to prevent reefed sails from unfurling under load.
Easy to Install or Upgrade
C-shaped connectors slip over the headstay without feeding wire through the connector.
The lower unit fits over the existing turnbuckle allowing easy length adjustment. Easy
upgrade from a Cruising Unit 2 and MKIV Unit 3 manual unit.