Mauri Pro Sailing

Shopping Cart

Your cart is currently empty.
Ronstan Series 42 Reef Car, 170mm x 96mm
Processing...

Ronstan Series 42 Reef Car, 170mm x 96mm

RONRC14272
Ronstan
List: $755.94
Price: $642.55

Choose your currency:

    Product Description


     

    Features:
    Class leading performance and sleek, contemporary styling
    Excellent dynamic and high static load performance
    Less than half the friction of the nearest competitor
    Removable becket pin for fitting of pre-spliced lines
    ** Line load through cleat not to exceed 175kg (385lb)

    Core Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.

    Universal Bearing -
    Dynamic and high static load performance
    The Ronstan Universal Bearing incorporates our proven 2-stage bearing system
    Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction.
    Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance.
    Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn’t perfect. Particularly important for cheek blocks.

    Alloy cheek plates Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear. Applications
    Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 12m (40ft).
    Various control line applications on larger yachts.
    Alloy sheave models are available for use with wire.

    Materials:
    Sheave: U.V. stabilised Acetal or anodised aluminium (AW models)
    Cheek plates: Aluminium alloy
    Ball Bearings: High compression strength carbon black Acetal




    Technical Information


    Specifications
    Imperial Metric Ronstan Batten Car System
    Weight 40 oz 1135 g
    A 6 11/32" 170 mm
    B 2 7/32" 56 mm
    C 2 13/16" 71 mm
    D 2 1/16" 52 mm
    E 3 25/32" 96 mm
         

    Product Description

    Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and anodised for maximum corrosion protection. Minimum distance from mast to mainsail luff enhance efficiency.

    Quick-Release batten receptacle cars and links are standard, to allow quick and easy removal of the mainsail for changeover, repair or stowage. Stainless steel ball joint links provide movement in all directions and up to 105 degrees either side of centr

    • Low profile.
    • Lightweight alloy car bodies.
    • Grade 316 stainless steel ball socket.
    • Torlon® ball bearings.

    Applications:
    Monohulls to 29 m (95 ft) or sail area 168 m2 (1808 ft2).
    Multihulls to 22 m (72 ft) or sail area 125 m2 (1345 ft2).

    Part Number: RC14272




Copyright © 2017 . Mauri Pro Sailing LLC