Harken Cruising Electric Furler Unit 2E
Harken Cruising Furling System 2E Electric
Designed for large cruising boats, Harken 2E Electric Furling is a headsail system that helps you get the most out of your boat, while letting you comfortably reef, furl, and set sails from the cockpit with the push of a button.
High-Strength Materials, Sculpted Design:
The torque tube, motor, and gear housing are deep-saturation hardcoat-anodized, UV-stabilized aluminum. The sculpted gear box and streamlined motor housing is sealed with high-quality lip seals. The motor mounts vertically into pulpits, clearing anchor tackle and providing low windage.
High-Torque, High-Efficiency Motor:
The motor is a permanent magnet design and features high torque and low power consumption. Inside, the hardened steel gears are permanently lubricated. The reversible drive uses a high-reduction worm gear set to prevent reefed sails from unfurling under load.
Easy to Install or Upgrade:
C-shaped connectors slip over the headstay without feeding wire through the connector. The lower unit fits over the existing turnbuckle allowing easy length adjustment. Easy upgrade from a MKIV Unit 2 and 3 manual unit.
1. Strong Foil Joints- Tough triple-interlock foil joints withstand years of torque loading.
2. 12- or 24-Volt Systems- Available in 12 or 24 volts; switches and 12- or 24-volt control box and circuit breaker included.
3. mergency Manual Operation- Use supplied crank handle or cordless drill adapter.
4. Scratch-Resistant Link Plates- Stainless steel link plates fit over standard turnbuckle, resist scratches, and can be easily repolished.