Harken Furling Accessories
Harken Carbo Lead Blocks Assemblies
Carbo Lead Blocks Assemblies are available for safe furling from the cockpit. The HAR 7404 kit's lightweight, UV stabalized Carbo blocks run exclusively on ball bearings for fast trimming under any load. A HAR 7202 ratchet maintains tension when spooling so the unit can furl smoothly and easily. The HAR 7403 outboard assembly allows furling line to travel outboard of the stanchion to keep the sidedeck clear. Block mounts with a strong four-screw clamp without removing the stanchions or lifelines. Use the HAR 7401 on the bow pulpit as an inboard lead. Use the HAR 7405 as an inboard lead for two lines, useful for continuous line furlers or cutter rigged boats with the two furlers. The Carbo Lead Blocks have ball-and-socket bases to align blocks for smooth leads aft. The HAR 7404 lead block kit provides a complete system for most boats.
Stanchion Mount Bases for carbo and Classic blocks lead furling line inside the stanchion.
Halryard Restrainers keeps the halyard against the mast. This provides a better angle to the halyard swivel and prevents it from wrapping around the foil. Stainless steel brackets feature hardcoat-annodized alluminum sheaves that accommodate both wire and rope.
Halyard Deflectors prevent the jib halyard and other halyards from wrapping around the foil.
Prefeeders and Snap Shackles facilitate fast sail changes. The HAR 7006 prefeeder features hardcoat-annodized rollers with low-friction bushings.