Wash your MAURIPRO MX5 foul weather gear at least once per season using a small amount of liquid detergent on a normal 105°F (40°C) cycle, then line dry. Proper cleaning removes the dirt, salt, and sweat that break down water resistance, so the Gore-Tex membrane keeps performing offshore.
MAURIPRO MX5 care at a glance
| Step | What to do | Key setting |
|---|---|---|
| Prep | Empty pockets, close all zippers and flaps, loosen drawstrings | Pre-treat stains with liquid detergent |
| Wash | One or two items at a time, small amount of liquid detergent (~30 ml / 1 oz) | Normal cycle, 105°F (40°C) |
| Rinse | Rinse thoroughly; rinse twice if needed | Low spin to reduce creasing |
| Dry | Line dry preferred; tumble dry if needed | Warm, normal cycle |
| Frequency | Clean when the collar or trousers show dirt, grime, or grease | At least once per season |
What is the MAURIPRO MX5 and why does care matter?
The MAURIPRO MX5 is our all-weather offshore and coastal sailing gear, built with Gore-Tex 3-layer technology. A durable, waterproof membrane is bonded between a rugged outer fabric and a robust inner lining, delivering long-term waterproof protection, high breathability during intense activity, and reliable windproofing for coastal cruisers and offshore racers alike. Because that performance depends on a clean membrane, dirt and sweat left in the fabric will gradually reduce water resistance and durability.
When should you wash your MX5 jacket and trousers?
Inspect the inside of the collar for dirt, grime, and sweat stains, and check the trousers for contaminants like oil or grease. As a baseline, wash your gear at least once per season. If you sail frequently or use the gear hard, clean it more often to keep the waterproof and breathable properties working as designed.
How do you wash the MX5 correctly?
Start by preparing the garment: empty every pocket, close all zippers and flaps, and loosen the drawstrings. For heavy stains, avoid harsh stain removers — instead, gently rub a small amount of liquid detergent into the affected area before washing. Then wash one or two items at a time with about 30 ml (1 ounce) of liquid detergent on a normal cycle at 105°F (40°C). Rinse thoroughly to remove all detergent residue, rinsing twice if necessary, and use a low spin setting to minimize creasing.
What is the best way to dry the MX5?
Line drying is the recommended method — it is gentle on the fabric and reduces environmental impact. If you need to use a dryer, select a warm, normal cycle. Avoid harsh heat, which can stress the membrane and seams over time.
Frequently asked questions
How often should I wash my MAURIPRO MX5?
At least once per season. Wash more frequently if you sail often or the collar and trousers show visible dirt, grease, or sweat.
What detergent should I use on the MX5?
Use a small amount of liquid detergent — around 30 ml (1 ounce). Avoid harsh stain removers; instead pre-treat heavy stains by gently rubbing in a little liquid detergent.
What temperature and cycle should I wash it on?
Wash on a normal cycle at 105°F (40°C), rinse thoroughly (twice if needed), and use a low spin setting to reduce creasing.
Can I put my MX5 gear in the dryer?
Line drying is preferred, but you can tumble dry on a warm, normal cycle if needed.
Why does washing matter for waterproof gear?
Dirt, salt, and sweat left in the fabric reduce water resistance and durability over time. Regular cleaning keeps the Gore-Tex 3-layer membrane breathable and fully waterproof.
If you have any further questions about MAURIPRO Sailing products, please don’t hesitate to contact us. Our team is always happy to assist you!