-

Quick Chain - 5/16 in (8.0 mm) DIN766 Galvanized (by ft)
QCKFVC200800000A0C
$5.99 USDUnit price /Unavailable -

Quick Chain - 3/8 in (10.0 mm) DIN766 Galvanized (by ft)
QCKFVC201000000A0C
$9.99 USDUnit price /Unavailable -
-

Quick Chain - 1/4 in (6.0 mm) DIN766 Galvanized (by ft)
QCKFVC200700000A0C
$4.99 USDUnit price /Unavailable -

Maxwell Chain - 3/8 in (10.0 mm) Stainless Steel (by ft)
MAXSP3179
$76.55 USDUnit price /Unavailable -

Maxwell Chain - 5/16 in (8.0 mm) Stainless Steel (by ft)
MAXSP3178
$47.13 USDUnit price /Unavailable -

Maxwell Chain - 1/4 in (6.0 mm) Stainless Steel (by ft)
MAXSP3177
$27.62 USDUnit price /Unavailable -
-
-
-

Imtra Chain - 1/2 in (12.0 mm) Stainless Steel (by ft)
IMTAC80802
$79.17 USDUnit price /Unavailable -

Imtra Chain - 3/8 in (10.0 mm) Stainless Steel (by ft)
IMTAC80602
$45.83 USDUnit price /Unavailable -

Imtra Chain - 5/16 in (8.0 mm) Stainless Steel (by ft)
IMTAC80502
$37.50 USDUnit price /Unavailable -

Imtra Chain - 1/4 in (6.0 mm) Stainless Steel (by ft)
IMTAC80402
$27.50 USDUnit price /Unavailable -

Imtra Chain - 1/2 in (12.0 mm) G43 Hot-Galvanized (by ft)
IMTAC40802
$15.00 USDUnit price /Unavailable -

Imtra Chain - 3/8 in (10.0 mm) G43 Hot-Galvanized (by ft)
IMTAC40602
$10.00 USDUnit price /Unavailable -

Imtra Chain - 5/16 in (8.0 mm) G43 Hot-Galvanized (by ft)
IMTAC40502
$8.33 USDUnit price /Unavailable -

Imtra Chain - 1/4 in (6.0 mm) G43 Hot-Galvanized (by ft)
IMTAC40402
$7.30 USDUnit price /Unavailable
Anchor Chain by the Foot: Galvanized or Stainless, DIN 766 or G40/G43, and Matching It to Your Windlass
Anchor chain is the weight and chafe-proof section of your rode, and on a boat with a windlass it also has to fit the gypsy exactly. This collection holds the anchor chain we sell by the foot, so you choose the length you need: Quick DIN 766 galvanized, Maxwell ACCO G40 high-test galvanized and stainless steel, and Imtra G43 hot-galvanized and stainless steel. Sizes run from 1/4 in (6 mm) to 1/2 in (12 mm) nominal. The decision comes down to the chain standard your windlass gypsy is cut for, the diameter, and the finish: galvanized or stainless.
Chain Families in This Collection
- Quick DIN 766 galvanized: 1/4 in (6 mm), 5/16 in (8 mm) and 3/8 in (10 mm), hot-dip galvanized and sold by the foot. DIN 766 is a calibrated metric standard with a fixed link pitch for each size: 18.5 mm at 6 mm, 24 mm at 8 mm and 28 mm at 10 mm. Start with the 5/16 in (8 mm) chain or the 3/8 in (10 mm) chain.
- Maxwell ACCO G40 HT: 1/4 in, 5/16 in, 3/8 in and 1/2 in (6, 8, 10 and 12 mm in the listings), G40 high-test chain sold by the foot, listed as compatible with Maxwell windlasses. See the 5/16 in and the 1/2 in. All Maxwell chain is also in Maxwell Anchor & Mooring Chains.
- Maxwell stainless steel: 1/4 in, 5/16 in and 3/8 in (6, 8 and 10 mm), sold by the foot, for owners who want a corrosion-resistant rode that stays clean on deck — for example the 3/8 in stainless.
- Imtra G43 hot-galvanized: 1/4 in, 5/16 in, 3/8 in and 1/2 in (6, 8, 10 and 12 mm), G43 high-test chain sold by the foot. See the 3/8 in and the 1/2 in, or browse Imtra Mooring Chains.
- Imtra stainless steel: 1/4 in, 5/16 in, 3/8 in and 1/2 in (6, 8, 10 and 12 mm), sold by the foot — for example the 3/8 in or the 1/2 in.
Read the size in the title as the nominal size. Chain sold to the imperial ACCO standard and chain sold to metric DIN 766 can share a nominal diameter and still have different link pitch and width, so the figure in the title is where you start, not where you finish.
DIN 766, G40 and G43: Why the Standard Matters More Than the Diameter
- Match the gypsy first. A windlass gypsy is cut for one link profile. Chain with the wrong pitch or width rides high on the gypsy, skips and can jam under load, even when the diameter looks right. Check your windlass manual or the gypsy marking for the standard and size, and measure link diameter (D), pitch (P) and width (W) on your old chain. Our guide How to Size Anchor Chain: Measure D, P and W has the full chart, and How to Match a Windlass Gypsy to Your Chain and Rode covers the gypsy side.
- DIN 766 (Quick): calibrated metric chain, the usual fit for European metric windlass gypsies.
- G40 and G43 (Maxwell, Imtra): high-test grades. High-test chain has a higher working load than standard-grade chain of the same diameter, which is why many boats can carry a smaller diameter without losing strength. Confirm the diameter and standard your windlass and anchor maker specify before you drop a size.
- No standard? Ask us. If you cannot identify your gypsy, send your windlass model or your D, P and W measurements and the team will confirm the chain before you order.
Galvanized or Stainless Steel
- Galvanized: the Quick chain is hot-dip galvanized and the Imtra G43 is hot-galvanized. Maxwell G40 is the high-test option. It is the usual rode chain.
- Stainless steel: Maxwell and Imtra list their stainless chain for corrosion resistance. It stays clean and looks right on a bow roller, and it is the choice when the rode is part of the look of the boat.
- Keep the system consistent: if you change to stainless, check that the shackles, swivel and connectors on the anchor end suit it; see Anchor Shackles, Swivels & Accessories.
Buying by the Foot, and What Goes with It
- Sold by the foot: every chain in this collection is listed by the foot, so you order the length your rode needs rather than a fixed coil.
- Chain only: these listings are the chain, not a complete rode. For a chain-and-rope rode that is already spliced, see Anchor Rodes; for chain hooks, pipes and stoppers, see Chain, Hooks, Pipes & Stoppers.
- Windlass: pair the chain with a gypsy cut for it. Browse Maxwell, Lewmar or Quick windlasses.
Who It's For
Cruisers re-chaining a rode, owners replacing worn or rusted chain on an existing windlass, and anyone building an all-chain or chain-and-rope rode for a new anchor. For how the anchor, chain and rope work together as one system, read How to Choose Anchoring Equipment: Matching Anchor, Rode, and Chain as One System.
Frequently Asked Questions
What size anchor chain do I need?
The chain has to match the gypsy on your windlass, so start from the windlass manual or the size marked on the gypsy and use your anchor maker's sizing table for the boat. The sizes in this collection are 1/4, 5/16, 3/8 and 1/2 in (6, 8, 10 and 12 mm) nominal. Our chain dimensions guide shows how to measure D, P and W.
Is DIN 766 the same as G40 or G43?
No. DIN 766 is a calibrated metric standard, G40 and G43 are high-test grades, and chains of the same nominal size can have a different link pitch and width. A gypsy cut for one will not seat the other correctly, so match the standard, not just the diameter.
Should I choose galvanized or stainless steel chain?
Galvanized is the usual rode chain: Quick and Imtra are hot-galvanized and the Maxwell G40 is high-test. Stainless steel (Maxwell, Imtra) is chosen for corrosion resistance and appearance. Whichever you choose, the link geometry must still match your gypsy.
How much chain do I order?
All the chain here is sold by the foot, so you order the length your rode needs. Our anchor rode guide explains how to size the chain and rope sections for your boat and depth.
Does the chain come with a rope splice, shackle or hook?
No. These are chain-only listings. Use Anchor Rodes for pre-spliced chain-and-rope sets, and shackles and swivels to connect the chain to the anchor.
