ATN Hatch / Dorcap - Size: Up to 40.0 in (1.0 m) (DOR-L)

The Dorcap simultaneously transforms your hatches into air vents and dorade boxes: Doubles the airflow through the hatch.
The Dorcap has two settings: "maximum airflow" and "rain risk". The "maximum airflow" position significantly increases air pressure. It cannot be compared to other flexible systems such as the "wind scoop". Its ideal design, rigid system, absence of lateral leakage, provide a "compression acceleration" air stream which penetrates to the interior of your vessel. This doubles the airflow of an open hatch.

Important: To obtain maximum effect, you should leave a hatch or a door open on the other end of the cabin. You need to ensure that air can escape, creating optimal airflow inside the boat!

The "rain risk" position enables airflow identical to that of an open hatch without the inconvenience of rain entering the boat. The Dorcap can be used for all types of hatch openings: towards the bow, rearwards or crosswise. Only the installation method between the deck and the hatch changes.

Our Part # ATN-DOR-L | Mfr. Part # DOR-L

• Use all buttons and switches through the case
• Also protects from dust, dirt, and sand
• Supplied with a belt, or you can use your own belt
• Like most of our cases, it'll float if you drop it in the drink
• The seams are high-frequency welded to form a super-strong bond
• This case features our 'TC' Aquaclip, which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion (see below for more)