Harken End Stop - Low-Beam - For Tracks: 1 1/16 in (27.0 mm) - Set of 2

E27 end controls do not fit older non-CB track. The E27 end controls’ interior ridges that extend into the waist of the track are too deep to fit non-CB track. E27 end controls require deep grooves for wire keepers on CB cars.

R27 low-beam track has holes drilled for end controls and enstops if entire length is used. If you shorten one end, make cut so end control screw passes through a track fastening hole. It is best to have track cut with an electric cross cut saw at a machine shop. Low beam track may be cut using a hacksaw but it is difficult to get a straight, even cut. Measure from center of hole to end of track so center is 9/16" (14 mm) from track end. If this does not work, make sure that end control screw hole does not interfere with mounting or pinstop hole.

Our Part # HARE2700 | Harken Part # E2700

Use with track/rail: R27