We Ship Worldwide! Shipping information.
INSTRUCTIONS

Quick LED courtesy light technical sheets and installation instructions (Gladis, Grace, Gwenda, Hallie, Ilenia, Irene, Lida, Margot, Patricia, Tess and Venus): cut-out, recess, power draw, fitting and wiring.

DocumentQuick LED Courtesy Lights Technical Sheets & Installation Instructions
FormatPDF · 2 pages · 1.5 MB
LanguageEnglish
Download PDF ▾
InstructionsPDF · 2 p.Gladis 1L – technical sheetPDF · 4 p.Gladis 2L – technical sheetPDF · 4 p.Grace 1L / 2L – installation instructionsPDF · 2 p.Grace 1L – technical sheetPDF · 4 p.Grace 2L – technical sheetPDF · 4 p.Gwenda 1L – technical sheetPDF · 4 p.Gwenda 2L – technical sheetPDF · 4 p.Hallie – technical sheetPDF · 4 p.Ilenia – technical sheetPDF · 4 p.Irene – technical sheetPDF · 4 p.Lida – installation instructionsPDF · 2 p.Lida – technical sheetPDF · 4 p.Margot 1L – technical sheetPDF · 4 p.Margot 2L – technical sheetPDF · 4 p.Patricia – technical sheetPDF · 4 p.Tess – technical sheetPDF · 4 p.Venus 72 V 4W – technical sheetPDF · 4 p.Venus 88 6W – technical sheetPDF · 4 p.
View Collection
SpecificationsInstallationWiringMaintenanceProducts
Quick LED Courtesy Lights — Technical Sheets & Installation Instructions

Range at a Glance

Model Power Supply Current Size Mounting hole Recess IP Fixing Installation
Gladis 1L 1.5 W 9-32 Vdc 0,12A@12V / 0,06A@24V 43 x 43 mm Ø 25 mm 3 mm IP65 Screws Wall
Gladis 2L 1.5 W 9-32 Vdc 0,12A@12V / 0,06A@24V 43 x 43 mm Ø 25 mm 3 mm IP65 Screws Wall
Grace 1L 1.5 W 9-32 Vdc 0,12A@12V / 0,06A@24V Ø 44 mm Ø 25 mm 3 mm IP65 Screws Wall
Grace 2L 1.5 W 9-32 Vdc 0,12A@12V / 0,06A@24V Ø 44 mm Ø 25 mm 3 mm IP65 Screws Wall
Gwenda 1L 0.25W@12V / 0.5W@24V 9-32 Vdc 0.02 A @12V / 24V 37,5 x 37,5 mm Ø 22 mm 24 mm IP65 Screws Wall
Gwenda 2L 0.5W@12V / 1W@24V 9-32 Vdc 0.04 A@12V / 24V 37,5 x 37,5 mm Ø 22 mm 24 mm IP65 Screws Wall
Hallie 1.5 W 9-32 Vdc 0,12A@12V / 0,06A@24V 43 x 43 mm Ø 25 mm 3 mm IP65 Screws Ceiling-wall
Ilenia 0.25W@12V / 0.5W@24V 9-32 Vdc 0.02 A @ 12 V / 24 V 37,5 x 37,5 mm Ø 19 mm 21 mm IP65 Screws Wall
Irene 0.25W@12V / 0.5W@24V 9-32 Vdc 0.02 A @ 12 V / 24 V Ø 45 mm Ø 19 mm 21 mm IP65 Screws Wall
Lida 1,5 W 9-32 Vdc 0,13A@12V/0,06@24V 36 x 36 mm Ø 25 mm 19 mm IP65 Screws Wall
Margot 1L 0,24W @12V / 0,48W @ 24V 9-32 Vdc 0,02A @ 12V / 24V Ø 37,5 mm Ø 22 mm 23,5 IP65 Screws Wall
Margot 2L 1W 0.5W@12V / 1W@24V 10-30 Vdc 0.04 A Ø 37,5 mm Ø 22 mm 24 mm IP65 Screws Wall
Patricia 0.24W@12V / 0.48W@24V 9-32 Vdc 0.02 A @ 12 V / 24 V Ø 40 mm Ø 19 mm 21 mm IP65 Screws Wall
Tess 0,5W 0.25W@12V / 0.5W@24V 10-30 Vdc 0.02 A@12V/24V 15,6 x 15,6 mm Ø 12 mm 13 mm IP65 Adhesive Ceiling-wall
Venus 72 V 4W 4 W 9-32 Vdc 0,33A@12V / 1,7A@24V (as printed) Ø 72 mm Ø 54 mm 20.5 mm IP66 Screws Wall
Venus 88 6W 6W 9-32V 0,5A@12W / 0,25A@24V (as printed) Ø 88 mm Ø 65 mm 41 mm IP66 Screws Wall
  • Bezels in AISI 316 stainless steel (Patricia: technopolymer). Typical finishes: polished / satin / white / gold PVD / black PVD; Margot 1L: chrome / satin / black PVD / gold PVD.
  • All constant-voltage, one colour, except Venus 72 and Venus 88 (bicolor). Hallie, Ilenia, Irene, Lida, Patricia, Tess and Venus are listed as dimmable (recommended dimmer on most sheets: FASP094CA2A3D00 HDIM300 D00).
  • Output published on the sheets: Lida 105 lm warm white / 116 lm day light (20° beam); Venus 72 V 4W 115 / 125 lm; Venus 88 6W 150 / 170 lm.
  • These lights have built-in LED lamps that cannot be replaced.

Gladis & Grace (recessed, Ø 25 mm)

  1. Bring the wires from the constant-voltage power supply (voltage as in the chart) to the panel.
  2. Drill a Ø 25 mm (1") hole.
  3. Fit the gasket before connecting.
  4. Connect red to positive and black to negative, then test the light.
  5. Fix the lighting body to the panel with two screws (not supplied) with a suitable countersunk head.
  6. Fit the frame into the lighting body by pushing and turning at the same time.

Lida & Hallie

Lida (Ø 25 mm / 63/64" hole): fit the gasket into the lighting body before connecting, connect red + / black – and test, insert the driver and the lighting body and fix with two countersunk screws (not supplied), then press the frame/reflector onto the body.

Hallie (surface): drill a hole for the wires to pass through the central hole of the base, connect red + / black – and test, lay the light over the hole, fix the base with self-tapping screws and press the frame on.

Margot 2L 1W: fit the gasket, connect (fast-on connectors on the wires can be cut off), fix with self-tapping screws, then press the frame on. For the other models follow the drawing on page 4 of each technical sheet.

Wiring & Power Supply

  • Use the unit in ultra-low voltage (SELV) with a constant-voltage LED power supply. Do not connect directly to the mains (AC).
  • More than one light: connect them in parallel. The power supply must deliver a wattage equal to or higher than the total of the lights connected.
  • Positive is the red wire, negative is the black wire.
  • Example on the Gladis sheet: six 1,5 W lights on one Quick PSCV 10W 24V constant-voltage power supply (the Grace and Lida sheets give three 1,5 W lights for the same supply).
  • Non-Quick power supplies may have a higher or lower inrush-current protection threshold, so the load may need different sizing because of the inrush current of the LED board at switch-on.
  • Always disconnect the power before installing or repairing any light, and check the label for maximum voltage and wattage.

Maintenance & Warranty

  • Clean with a soft damp cloth. Do not use chlorine-based sanitisers or degreasers; rinse with plenty of fresh water afterwards.
  • Quick lighting products carry a contractual warranty of up to 3 years from purchase; keep the proof of purchase and the week/year of production printed on the product label.
  • The warranty requires use within the data-sheet limits and correct installation; it does not cover rooms above 35°C ambient, incorrect connection or unqualified installation.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual