Description
Description
When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong!
Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit's all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle.
There's more: Protexit blocks offer higher working loads than any small boat exit blocks we've ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don't deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Our Part # HAR1207 | Mfr. Part # 1207
Technical Information
Technical Information
| Description | Imperial | Metric |
|---|---|---|
| Sheave Dia. | 3 1/18 in | 80.0 mm |
| Length | 7 1/2 in | 191.0 mm |
| Weight | 14.5 oz | 410.0 g |
| Max. Line Dia. | 9/16 in | 14.0 mm |
| Fasteners | 5/16 FH in | 6 FH mm |
| A | 1 1/16 in | 27.0 mm |
| B | 4 1/16 in | 103.2 mm |
| Max. Working load | 9921.0 lb | 4500.0 kg |
| Breaking Load | 19842.0 lb | 9000.0 kg |

