Ronstan Batten System Selector (Part 2 of 2)
SELECTION GUIDE
View Collection
Ronstan batten car system selectors, one per track series: size limits by hull LOA and sail area, and every component with its part number and length, to spec a full-batten mainsail system with your sailmaker.
DocumentRonstan Batten System Selector
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Download PDF ▾
This manual is split into 2 pages: Part 1 → · Part 2
Track Series 26 & 26 Captive Ball
Series 26
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC1261-2.0 | Track, 2 metres | Actual length 1975mm (77 13/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 27 | View part → |
| RC1261-3.0 | Track, 3 metres | Actual length 3025mm (119 3/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 41 | View part → |
| RC1261-6.0 | Track, 6 metres | Actual length 6025mm (237 3/8"); hole pitch 75mm (2 31/32"); Fastening slugs = 81 | Ask us to source it → |
| RC1261J | Track joiner | View part → | |
| RC00332 | Track fixing slug | Slugs include M6 csk fasteners; see the Ronstan website for the track fixing slug selection table | Ask us to source it → |
| RC00333 | Track fixing slug | Ask us to source it → | |
| RC00341 | Track fixing slug | View part → | |
| RC00343 | Track fixing slug | View part → | |
| RC00380 | Track fixing plate | Ask us to source it → | |
| RC12680 | End stop (top) | L=34mm (1 11/32") | View part → |
| RC12660 | Headboard car | L=225mm (8 7/8") | Ask us to source it → |
| RC00011 | Headboard plates (pair) | View part → | |
| RC12663 | Intermediate car | L=70mm (2 3/4"); typically 6 per system | View part → |
| RC12669 | Quick release batten car | L=100mm (3 15/16"); typically 5 per system | View part → |
| RC12672 | Reef car | L=90mm (3 17/32"); replaces an intermediate car at each reef point | View part → |
| RC00253 | Quick release batten receptacle link | View part → | |
| RC00212 | Quick release batten receptacle link | View part → | |
| RC00213 | Quick release batten receptacle link | View part → | |
| RC1269-0.3 | Standard gate track / car stack section | L=325mm (12 13/16"); hole pitch 75mm (2 31/32"); fastening slugs = 5 | View part → |
| RC12681 | End stop (bottom) | L=55mm (2 5/32") | View part → |
Series 26 Captive Ball
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC1261-2.0 | Track, 2 metres | Actual length 1975mm (77 13/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 27 | View part → |
| RC1261-3.0 | Track, 3 metres | Actual length 3025mm (119 3/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 41 | View part → |
| RC1261-6.0 | Track, 6 metres | Actual length 6025mm (237 3/8"); hole pitch 75mm (2 31/32"); Fastening slugs = 81 | Ask us to source it → |
| RC1261J | Track joiner | View part → | |
| RC00332 | Track fixing slug | Slugs include M6 csk fasteners; see the Ronstan website for the track fixing slug selection table | Ask us to source it → |
| RC00333 | Track fixing slug | Ask us to source it → | |
| RC00341 | Track fixing slug | View part → | |
| RC00343 | Track fixing slug | View part → | |
| RC00380 | Track fixing plate | Ask us to source it → | |
| RC12680 | End stop (top) | L=34mm (1 11/32") | View part → |
| RC42660 | Headboard car | L=236mm (9 5/16") | View part → |
| RC00011 | Headboard plates (pair) | View part → | |
| RC42663 | Intermediate car | L=64mm (2 1/2"); typically 6 per system | View part → |
| RC42669 | Quick release batten car | L=115mm (4 11/16"); typically 5 per system | View part → |
| RC42672 | Reef car | L=90mm (3 9/16"); replaces an intermediate car at each reef point | View part → |
| RC00253 | Quick release batten receptacle link | View part → | |
| RC00212 | Quick release batten receptacle link | View part → | |
| RC00213 | Quick release batten receptacle link | View part → | |
| RC1269-0.3 | Standard gate track / car stack section | L=325mm (12 13/16"); hole pitch 75mm (2 31/32"); fastening slugs = 5 | View part → |
| RC12681 | End stop (bottom) | L=55mm (2 5/32") | View part → |
Track Series 30 & 30 Captive Ball
Series 30
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC1301-2.0 | Track, 2 metres | Actual length 2025mm (79 25/32"); hole pitch 100mm (3 15/16"); Fastening slugs = 21 | View part → |
| RC1301-3.0 | Track, 3 metres | Actual length 3025mm (119 3/16"); hole pitch 100mm (3 15/16"); Fastening slugs = 31 | View part → |
| RC1301-6.0 | Track, 6 metres | Actual length 6025mm (237 3/8"); hole pitch 100mm (3 15/16"); Fastening slugs = 61 | Ask us to source it → |
| RC1301J | Track joiner | View part → | |
| RC00360 | Track fixing slug | Slugs include M8 csk fasteners | View part → |
| RC13080 | End stop (top) | L=37mm (1 15/32") | View part → |
| RC1308-1.5 | Headboard car track (additional section) * | L=1500mm (59 3/32"); hole pitch 37.5mm (1 15/32"); fastening slugs = 40 | Ask us to source it → |
| RC13060 | Headboard car | L=255mm (10 1/16") | View part → |
| RC00012 | Headboard plates (pair) | View part → | |
| RC13063 | Intermediate car | L=78mm (3 1/16"); typically 6 per system | View part → |
| RC13069 | Quick release batten car | L=130mm (5 1/8"); typically 5 per system | View part → |
| RC13072 | Reef car | L=130mm (5 1/8"); replaces an intermediate car at each reef point | View part → |
| RC00213 | Quick release batten receptacle link | View part → | |
| RC1309-0.4 | Standard gate track / car stack section | L=400mm (15 3/4"); hole pitch 100mm; fastening slugs = 4 | View part → |
| RC13081 | End stop (bottom) | L=65mm (2 9/16") | View part → |
Series 30 Captive Ball
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC1301-2.0 | Track, 2 metres | Actual length 2025mm (79 25/32"); hole pitch 100mm (3 15/16"); Fastening slugs = 21 | View part → |
| RC1301-3.0 | Track, 3 metres | Actual length 3025mm (119 3/16"); hole pitch 100mm (3 15/16"); Fastening slugs = 31 | View part → |
| RC1301-6.0 | Track, 6 metres | Actual length 6025mm (237 3/8"); hole pitch 100mm (3 15/16"); Fastening slugs = 61 | Ask us to source it → |
| RC1301J | Track joiner | View part → | |
| RC00360 | Track fixing slug | Slugs include M8 csk fasteners | View part → |
| RC13080 | End stop (top) | L=37mm (1 15/32") | View part → |
| RC1308-1.5 | Headboard car track (additional section) * | L=1500mm (59 3/32"); hole pitch 37.5mm (1 15/32"); fastening slugs = 40 | Ask us to source it → |
| RC43060 | Headboard car | L=255mm (10 1/16") | View part → |
| RC43061 | Headboard car, long | L=337mm (13 9/32") | View part → |
| RC00012 | Headboard plates (pair) | View part → | |
| RC43063 | Intermediate car | L=69mm (2 23/32"); typically 6 per system | View part → |
| RC43069 | Quick release batten car | L=119mm (4 11/16"); typically 5 per system | View part → |
| RC43072 | Reef car | L=119mm (4 11/16"); replaces an intermediate car at each reef point | Ask us to source it → |
| RC00213 | Quick release batten receptacle link | View part → | |
| RC1309-0.4 | Standard gate track / car stack section | L=400mm (15 3/4"); hole pitch 100mm; fastening slugs = 4 | View part → |
| RC13081 | End stop (bottom) | L=65mm (2 9/16") | View part → |
* Additional headboard track sections: see Overview.
Track Series 42
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC1420-X.X | Track, 2 metres | Actual length 1996mm (78 5/8"); hole pitch 100mm (3 15/16"); M10 (3/8") csk fasteners = 20 (not included) | Ask us to source it → |
| RC1420-X.X | Track, 3 metres | Actual length 2996mm (118 11/16"); M10 csk fasteners = 30 (not included) | Ask us to source it → |
| RC1420-X.X | Track, 6 metres | Actual length 5996mm (236 1/4"); M10 csk fasteners = 60 (not included) | Ask us to source it → |
| RC1421J | Track joiner | View part → | |
| RC1422-2.0 | Luff groove track, 2 metres | Actual length 2025mm (79 25/32"); undrilled | View part → |
| RC1422-3.0 | Luff groove track, 3 metres | Actual length 3025mm (119 3/16"); undrilled | View part → |
| RC1422-6.0 | Luff groove track, 6 metres | Actual length 6025mm (237 3/8"); undrilled | Ask us to source it → |
| RC1422J | Luff groove track joiner | View part → | |
| RC14280 | End stop (top) | L=50mm (1 31/32") | View part → |
| RC1428-1.5 | Headboard car track (additional section) * | L=1500mm (59 3/32"); hole pitch 50mm (1 31/32"); M10 (3/8") csk fasteners = 30 (not included) | Ask us to source it → |
| RC14260 | Headboard car | L=335mm (13 3/16") | Ask us to source it → |
| RC00013 | Headboard plates (pair) | View part → | |
| RC14263 | Intermediate car | L=85mm (3 11/32"); typically 6 per system | View part → |
| RC14269 | Quick release batten car | L=165mm (6 1/2"); typically 5 per system | View part → |
| RC14272 | Reef car | L=170mm (6 11/16"); replaces an intermediate car at each reef point | View part → |
| RC00272 | Quick release batten receptacle link | Ask us to source it → | |
| RC00263 | Quick release batten receptacle link | Ask us to source it → | |
| RC00214 | Quick release batten receptacle link | View part → | |
| RC1429-0.6 | Standard gate track / car stack section | L=650mm (25 5/8"); hole pitch 100mm; M10 csk fasteners = 7 (not included) | View part → |
| RC1429-0.6L | Luff groove gate track | L=650mm (25 5/8"); hole pitch 100mm; M6 (1/4") csk fasteners = 14 (not included) | View part → |
| RC14281 | End stop (bottom) | L=100mm (3 15/16") | View part → |
RC1420-X.X as printed on the selector for all three track lengths. * Additional headboard track section: see Overview.
Ballslide™ Series 6 & 8
Ballslide™ Series 6
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC264xx | Feet required for cars | For luff groove openings greater than 9mm (3/8"); not supplied with cars; sold in pairs; fasteners included | Ask us to source it → |
| RC20111 | Feet (pairs) | View part → | |
| RC20112 | Feet (pairs) | View part → | |
| RC20113 | Feet (pairs) | View part → | |
| RC20114 | Feet (pairs) | View part → | |
| RC20115 | Feet (pairs) | View part → | |
| RC20116 | Feet (pairs) | View part → | |
| RC20118 | Feet (pairs) | View part → | |
| RC20119 | Feet (pairs) | View part → | |
| RC261xx | Feet supplied with cars | For luff groove openings of approximately 4.5mm (3/16") | Ask us to source it → |
| RC263xx | Feet supplied with cars | For luff groove openings of approximately 4.5mm (3/16") | Ask us to source it → |
| RC26160 | Headboard car | L=160mm (6 5/16"); 2 pairs of feet required per headboard car | View part → |
| RC26360 | Headboard car | L=160mm (6 5/16"); 2 pairs of feet required per headboard car | View part → |
| RC26460 | Headboard car | L=160mm (6 5/16"); 2 pairs of feet required per headboard car | View part → |
| RC00010 | Headboard plates (pair) | View part → | |
| RC26163 | Intermediate car | L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car | View part → |
| RC26263 | Intermediate car | L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car | Ask us to source it → |
| RC26463 | Intermediate car | L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car | View part → |
| RC26166 | Batten car | L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car | View part → |
| RC26366 | Batten car | L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car | View part → |
| RC26466 | Batten car | L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car | View part → |
| RC00151 | Batten receptacle link | View part → | |
| RC00141 | Batten receptacle link | View part → | |
| RC00110 | Batten receptacle link | View part → | |
| RC26181 | End stop | L=68mm (2 11/16") | View part → |
Ballslide™ Series 8
| Part No. | Component | Size / notes | |
|---|---|---|---|
| RC284xx | Feet required for cars | For luff groove openings greater than 12mm (1/2"); not supplied with cars; sold in pairs; fasteners included | Ask us to source it → |
| RC20130 | Feet (pairs) | View part → | |
| RC20131 | Feet (pairs) | View part → | |
| RC20135 | Feet (pairs) | Ask us to source it → | |
| RC281xx | Feet supplied with cars | For luff groove openings of approximately 4.5mm (3/16") | Ask us to source it → |
| RC28160 | Headboard car, short | L=214mm (8 7/16"); 2 pairs of feet required per headboard car | View part → |
| RC28460 | Headboard car, short | L=214mm (8 7/16"); 2 pairs of feet required per headboard car | View part → |
| RC28161 | Headboard car, long | L=290mm (11 7/16"); 2 pairs of feet required per headboard car | View part → |
| RC28461 | Headboard car, long | L=290mm (11 7/16"); 2 pairs of feet required per headboard car | View part → |
| RC00010 | Headboard plates (pair) | View part → | |
| RC28163 | Intermediate car | L=76mm (3"); typically 6 per system; 1 pair of feet per car | View part → |
| RC28463 | Intermediate car | L=76mm (3"); typically 6 per system; 1 pair of feet per car | View part → |
| RC28166 | Batten car (standard) | L=92mm (3 5/8"); typically 5 per system; 1 pair of feet per car | View part → |
| RC28466 | Batten car (standard) | L=92mm (3 5/8"); typically 5 per system; 1 pair of feet per car | View part → |
| RC28169 | Quick release batten car | L=105mm (4 1/8"); typically 5 per system; 1 pair of feet per car | View part → |
| RC28469 | Quick release batten car | L=105mm (4 1/8"); typically 5 per system; 1 pair of feet per car | View part → |
| RC00152 | Batten receptacle link | View part → | |
| RC00111 | Batten receptacle link | View part → | |
| RC00252 | Quick release batten receptacle link | View part → | |
| RC00211 | Quick release batten receptacle link | View part → | |
| RC28181 | End stop | L=54mm (2 1/8") | View part → |
Series 6 and 8: the selector groups the headboard, intermediate and batten car numbers by foot type without naming each; xx = foot code. See the Ronstan website for mast compatibility tables. Series 8 limits: the lower values apply with the shortest headboard car and batten cars, the higher with the longest.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Selection Guide
-
RON-RC11966D
$154.00 USDUnit price /Unavailable -
Ronstan Batten Car Sliders (Low Profile) w/ Torlon Ball Bearings - For Series 19: 0.75 in (19 mm)
RONRC11966
$259.00 USDList Price: $306.18 USDUnit price /Unavailable -
Ronstan Batten Car System - Intermediate Car - Series 19 - Length: 48 x 47 mm
RONRC11963
$209.00 USDList Price: $247.13 USDUnit price /Unavailable -
Ronstan Headboard Cars - Series 19 - 5 3/4 x 1 7/8 in (146.0 x 47.0 mm)
RON-RC11960D
$399.00 USDList Price: $489.86 USDUnit price /Unavailable -
Ronstan Headboard Cars - Series 19 - 6 3/4 x 1 7/8 in (171.0 x 47.0 mm)
RONRC11960
$549.00 USDList Price: $674.59 USDUnit price /Unavailable -
Ronstan Track - Series 19 Mast Ball Bearing (Black) (Alloy) - W: 0.75 in (19 mm) & L: 9.9 ft (3 m)
RONRC119130
$231.00 USDList Price: $273.03 USDUnit price /Unavailable -
Ronstan Batten Car End Fitting - Series 14 End Stop, Plastic (68mm x 33mm)
RONRC11481
$53.02 USDUnit price /Unavailable -
Ronstan Track - Series 14 Mast Gate Ball Bearing (Black) (Alloy) - W: 0.56 in (14 mm)
RON-RC1149-02
$30.32 USDUnit price /Unavailable -
Ronstan Batten Car Receptacles - Link w/ M10 Thread - For Series 14 & Series 6 Ballslide
RONRC00110
$99.54 USDUnit price /Unavailable -
Ronstan Batten Car Receptacle - w/ Link - For Series 6 Ballslide & Series 14
RONRC00141
$130.00 USDUnit price /Unavailable -
Ronstan Batten Car Receptacle - w/ Link - Large - For Series 6 Ballslide & Series 14
RONRC00151
$163.00 USDList Price: $193.07 USDUnit price /Unavailable -
Ronstan Batten Car Sliders (Low Profile) w/ Torlon Ball Bearings - For Series 14: 0.56 in (14 mm)
RONRC11466
$221.00 USDList Price: $261.51 USDUnit price /Unavailable -
Ronstan Batten Car System - Intermediate Car - Series 14 - Length: 54 x 41 mm
RONRC11463
$196.00 USDList Price: $232.70 USDUnit price /Unavailable -
RONRC00010
$134.00 USDUnit price /Unavailable -
Ronstan Headboard Cars - Series 14 - 6 1/8 x 1 5/8 in (155.0 x 41.0 mm)
RONRC11460
$461.00 USDList Price: $566.24 USDUnit price /Unavailable -
Ronstan Batten Car End Fitting - Series 14 End Cap, Plastic (28mm x 20mm)
RON-RC11480
$8.83 USDUnit price /Unavailable -
Ronstan Track - Series 14 Mast Ball Bearing (Black) (Alloy) - W: 0.56 in (14 mm) & L: 9.9 ft (3 m)
RONRC114130
$186.00 USDList Price: $220.79 USDUnit price /Unavailable -
RONRC114120
$128.00 USDUnit price /Unavailable
