DESCRIPTION

NAC-3 High Current Course Computer

The NAC-3 Autopilot Computer is the brains behind your Simrad autopilot system. It contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10M (33') or greater in length and is rated to operate high-current pumps, mechanical drive units, and solenoid valves (30 Amps continuous/50 Amps peak).

Our Part # SIM-000-13250-001 | Simrad Part # 000-13250-001

FEATURES

Features:

  • Reliable autopilot performance based on Simrad Continuum™ steering technology.
  • Recommended for boats above 10M (33') in length.
  • High-current output of 30 Amps continuous, 50 Amps peak.
  • Clutch output (3 Amps maximum).
  • Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves.
  • Virtual rudder feedback for simplified installation aboard outboard and sterndrive (inboard/outboard) boats.
  • Supports Simrad RF25 and RF300 rudder feedback units.
  • NMEA 2000® connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays.
  • NMEA 0183® input.

TECHNICAL INFORMATION


DescriptionImperialMetric
Max Power Output1000 W1000 W
Frequency50/200 kHz50/200 kHz
Cone Angle (200 kHz)12°12°
Cone Angle (50 kHz)30°30°
Cable Length30.0 ft9.1 m
Mounting StyleThru-Hull