Henri-Lloyd Hi-Fits and Salopettes: Coastal Hi-Fit and Dynamik Salopette
A hi-fit or salopette is a high-waisted waterproof trouser that extends up the chest and back, so water running down inside your jacket does not reach your legs. It is the lower half of a foul weather set, worn with a Henri-Lloyd jacket. This collection holds the two Henri-Lloyd models we list: the Coastal Hi-Fit for coastal and inshore sailing, and the Dynamik Salopette, a lighter 3-layer stretch bib.
The Two Models in This Collection
- Coastal Hi-Fit, men’s and unisex (Men, Red and Unisex, Navy Blue): a 2-layer recycled, PFC-free DRI PRO shell with taped seams and a 15k waterproof rating. Cordura reinforcement on the knees, rear and heels, lined chest pockets, elasticated hook-and-loop shoulder straps, dual waist adjustment and a heavyweight Vislon AquaGuard centre zip. Reflective Henri-Lloyd logos add visibility in low light.
- Coastal Hi-Fit, women’s (Women, Red and Women, Navy Blue): the same 2-layer DRI PRO fabric, taped seams and 15k rating, with a women’s cut and its own details — a drop-seat design with AquaGuard zips, Cordura on the drop seat, knees and hems, adjustable ankle straps, adjustable stretch shoulder straps, cargo leg pockets with drainage holes, back waist adjusters, a back hanger loop and an unlined body to dry quicker.
- Dynamik Salopette (Unisex, Black): a 3-layer DRI PRO recycled nylon fabric with a PFC-free membrane, a 20k waterproof rating, fully taped seams, mechanical stretch and breathability listed at over 20,000 g/m²/24 hr. It weighs 840 g. The shape is articulated: a Lycra top, a pre-shaped seat, articulated knees, stretch Cordura seat and knee patches, 2/3 mm knee cushioning, a crotch gusset, waterproof stretch ankle cuffs and a welded H-hanger loop.
Coastal Hi-Fit or Dynamik Salopette
- Coastal Hi-Fit: Henri-Lloyd built it for all coastal and inshore sailing and says to pair it with the Biscay or Sail jackets. It is a 2-layer shell with Cordura reinforcement on the wear points.
- Dynamik Salopette: a 3-layer fabric with a higher 20k rating, mechanical stretch and a listed weight of 840 g, in an articulated cut with a pre-shaped seat and knees.
- Waterproof or water-resistant: both models here are waterproof with taped seams. The Explorer Trouser 3.0 in the Henri-Lloyd pants range has a DWR finish only, which is water-resistant, so it is not a substitute for a hi-fit in sustained rain or spray. Browse the Henri-Lloyd pants for that style.
Fit and Sizing
Check the cut in the title (Men, Women or Unisex), then size from your chest, waist and hip measurements against Henri-Lloyd’s chart. Henri-Lloyd generally runs true to the chart, and for pieces worn over a fleece or mid-layer our Henri-Lloyd size guide suggests sizing up so the shell does not bind. The shoulder straps and waist or back adjusters on these models let you fine-tune the fit when you change layers.
Caring for a Hi-Fit
The Dynamik Salopette listing includes Henri-Lloyd’s care guide: rinse thoroughly with fresh water after every use, hang to dry naturally and ideally in the shade, wash on a gentle or outdoor cycle with a technical waterproof-gear product, and reproof every 2 to 3 months, or more often with heavy use. Follow the instructions of the product you use.
Who It’s For
Coastal and offshore sailors who need a dry lower body in spray and rain, and anyone building a Henri-Lloyd foul weather set. Match it with a Coastal Sail Jacket or a Biscay Jacket, or browse all Henri-Lloyd jackets. For the full choice between bibs and trousers, read how to choose waterproof sailing trousers.
Frequently Asked Questions
What is the difference between a hi-fit and sailing trousers?
A hi-fit or salopette is a high-waisted bib that extends up the chest and back, giving better protection against water running down inside. A standard trouser sits at the waist and is lighter and cooler, better for warm-weather coastal use. Our trousers guide compares them.
What waterproof rating do the Henri-Lloyd hi-fits have?
The Coastal Hi-Fit lists a 15k waterproof rating in a 2-layer DRI PRO fabric. The Dynamik Salopette lists 20k in a 3-layer DRI PRO fabric. Both have taped seams.
Which Henri-Lloyd jacket goes with the Coastal Hi-Fit?
Henri-Lloyd says to pair the Coastal Hi-Fit with the Biscay or Sail jackets. Both are in the Henri-Lloyd jackets collection.
How do I choose the right size?
Match your chest, waist and hip measurements to the Henri-Lloyd men’s or women’s chart, and size up if you plan to wear a fleece or mid-layer underneath. See the Henri-Lloyd size guide.
How do I look after waterproof salopettes?
Rinse with fresh water after every use, dry them naturally in the shade, wash with a technical product made for waterproof outdoor gear, and reproof every 2 to 3 months, or more often with heavy use. Dry on low heat if you need to reactivate the waterproofing.


