One Design · Keelboat
Micro Class parts, rigging and specifications
Also known as: Micro Cupper, Micro 5.50, Microtoner, Micro Cup
The Micro Class is a keelboat one-design class. MAURIPRO lists 16 parts for the Micro Class below, grouped by system, with live prices and stock.
- Keelboat
- 16 parts
- 8 published figures
Your Micro Class at MAURIPRO
What you can do on this page.
Shop Micro Class by system
Micro Class parts
Prices and stock are live from our catalogue.
Harken part numbers cross-checked against Harken's published one-design deck layout for the Micro Class (checked 2026-11-04).
Micro Class specifications
| Specification | Published figure | Source |
|---|---|---|
| Length overall (LOA)Box-rule maximum, hull length measured 0,70 m above waterline,… | The Hull Length measured at 0,70 metre above the waterline shall not exceed 5,50 metres | International Micro Cupper Class Association (IMCCA), Class Rules of the Micro Class, applicable from 22 May 2023, 4.2.1 Hull Dimensions |
| BeamBox-rule maximum | The Maximum Beam including plates, rubbing strakes or similar protections shall not exceed 2,45 metres. (8 ft) | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, 4.5.1 Maximum Beam |
| DraftBox-rule maximum | The Maximum Draft shall not exceed 1,10 metre in Measurement trim. (3 ft 7 in) | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, 4.5.4 Maximum Draft |
| Upwind sail areaBox-rule maximum, main + headsail | The Maximum Sail Area upwind (Mainsail and Headsail) shall not exceed 18,50 square metres. (199 sq ft) | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, Section 5 Sails |
| Spinnaker / gennaker areaMaximum spinnaker area | SMS shall not be greater than 19,60 square metres. (211 sq ft) | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, 5.4.7 Spinnaker |
| Mast lengthDivision maximums | Maximum Mast Length — Racer 8,20 metres / Cruiser 7,70 metres | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, Appendix A1.04 (Divisions table) |
| CrewRule 3.3 allows reduction to two members under conditions | Crew number is three. | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, 3.3.1 Crew number |
| RigRotating masts and double-luffed sails prohibited | Only single-masted Boats are allowed. | IMCCA, Class Rules of the Micro Class, applicable from 22 May 2023, Section 5 |
Figures are shown as each source publishes them, with the other unit converted. Class rules set the measurements that count for racing.
Micro Class class rules and references
- Class rules: Class Rules of the Micro Class, applicable from 22 May 2023 (IMCCA; previous edition 2015-2018 applicable from 25.05.2016)
- Class association: micro-class.org
- Builder: windyacht.pl
References checked 2026-11-04.
Micro Class buying questions
What Micro Class parts does MAURIPRO carry?
16 products are listed for the Micro Class on this page: blocks & sheaves (13); cleats, clutches & fairleads (3). Prices and availability shown are live from our catalogue.
How do I know a part fits my Micro Class?
Each part here is linked to the Micro Class because its exact manufacturer part number appears on the Micro Class parts lists we reviewed (including Harken's published one-design deck layout for this class). Fit can still depend on your boat's year, builder and rig, so check the product details and your class rules, or ask our technical team before you order.
Which rules govern the Micro Class?
The class is governed by its class rules (Class Rules of the Micro Class, applicable from 22 May 2023 (IMCCA; previous edition 2015-2018 applicable from 25.05.2016)). Check the current edition with the class association before buying parts for racing.
Everything in this collection
All products currently in this MAURIPRO collection, with filters.
-

Harken Cam Cleat - Cam-Matic (Micro) 468 - Line: 5/64 to 1/4 in (2 to 6 mm)
HAR468
$37.95 USDUnit price /Unavailable -
-
-
-
-
-
-
-
-
-
-
-
-
-

Harken Swivel Cam Cleat - Base (Standard) w/ Cam-Matic 150 - Line: 1/8 to 1/2 in (3 to 12 mm)
HAR144
$186.95 USDUnit price /Unavailable -

Harken Cam Cleat - Cam-Matic 150 - Line: 1/8 to 1/2 in (3 to 12 mm)
HAR150
$45.95 USDUnit price /Unavailable




