Andersen Winch Push Buttons (PDF)

DRILL TEMPLATE

1:1 mounting templates and cut-out methods for the Andersen push buttons for E1, two-speed and three-speed electric winches (RA582000 / RA582010 / RA582020) and for Compact Motor™ winches (RA866000 / RA866010 / RA866020).

DocumentAndersen Winch Push Buttons Mounting Dimension Templates

FormatPDF · 2 pages · 0.5 MB

LanguageEnglish

Download PDF ▾

View Collection

E1 Push Button Compact Motor Push Button Printing Products

Andersen Winch Push Buttons — Mounting Dimension Templates

Push Button – E1, Two Speed & Three Speed Electric Winches

Item	Detail
Product no.	RA582000, RA582010, RA582020
Template	RON-MDT/PBE1-Rev.2; scale 1:1 on A4 (210mmW x 297mmH)
Method A (blue areas)	Drill a Ø19mm (3/4") hole at the centre of the push button location and a Ø5mm (3/16") hole immediately beside it for the breather tube
Method B (red areas)	Drill a Ø25mm (1") hole offset 2mm (1/16") from the centre of the push button location
Fixing	3 holes Ø3mm (1/8") typical
Outline	50mm (1 15/16") × 50mm (1 15/16"); the drawing also shows the cover in open position

Push Button – Compact Motor™ Winches

Item	Detail
Product no.	RA866000, RA866010, RA866020
Templates	RON-MDT/PBCM-Rev.1 (page 2 of the first download) and RON-MDT/PBCM-Rev.2 (second download, showing the hinged cover in open position and the push button base); scale 1:1 on A4
Cut-out	One hole Ø25mm (1")
Fixing	3 holes Ø3mm (1/8") typical
Outline	50mm (1 15/16") × 50mm (1 15/16")

Using the Templates

Print the PDF at 1:1 scale on A4 – do not let the printer scale it to fit.
Measure the printed 50mm (1 15/16") outline before you drill; if it does not match, the print is scaled.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.