We Ship Worldwide! Shipping information.
OWNER'S MANUAL

T-Lock user's guide (Rev. 01, 05/2018): technical details, installation, sealing plug positions, toggle use and maintenance of the Antal flush-deck T-Lock base, with exploded views, dimension drawings and spare part codes for TL22.33 and TL28.41.

DocumentAntal T-Lock User's Guide, Exploded Views & Dimension Drawings
FormatPDF · 4 pages · 1.0 MB
LanguageEnglish
Download PDF ▾
Owner's ManualPDF · 4 p.TL22.33 T-Lock — exploded view & parts listPDF · 1 p.TL28.41 — exploded view & parts listPDF · 1 p.TL22.33 T-Lock — dimension drawingPDF · 1 p.TL28.41 — dimension drawingPDF · 1 p.
ModelsSpecificationsHow to UseInstallationExploded ViewsSpare PartsUsing the DrawingsProducts
Antal T-Lock — User's Guide, Exploded Views & Dimension Drawings

Antal T-Lock – Models and Drawings

Model Description Weight SWL Drawings (downloads)
TL22.33 T-Lock 170 gr 2200 kg Exploded view, Dimension drawing
TL28.41 T-Lock size 28 300 gr 3500 kg Exploded view, Dimension drawing

Technical Details

Model (guide) D mm Max H mm Hole Ø mm Weight gr SWL kg
TL22.32 64 30 44 170 2200
TL28.40 74 35 54 300 3500
Toggle A mm B H mm
TT22.32 32 2230 (as printed)
TT28.40 40 28

The user's guide (Rev. 01, 05/2018) lists the earlier codes TL22.32 and TL28.40; the current exploded views and dimension drawings are TL22.33 and TL28.41. Hole Ø is the hole-saw size to cut in the deck.

How the T-Lock Works

  • A watertight flush-mounted deck base to which a loop can be connected; a special toggle locks in automatically.
  • The toggle cannot be removed under load, but comes out easily without load. It swivels, so it takes a load in any direction.
  • Mounting: push the toggle in and push down – it locks automatically. Removal: push in and pull up.
  • Used as a dog-bone it adapts to any Dyneema® loop: a simple loop, a low friction ring with loop or a snatch block with loop. Supplied with a Dyneema loop with toggle (T-Loop).
  • Accessories: low friction ring fixed to the loop, simple aluminium toggle ("dog-bone") for your own loop, and many Antal blocks and snatch blocks tied to the toggle.
  • The T-Lock is not a boat lifting device.

Sealing Plug Positions

  • Low position (unscrewed): the toggle can be fitted into the base or taken off (only if not under load).
  • High position (screwed): the toggle is permanently locked into the base and cannot be taken off. The plug is adjusted from under the deck.
  • For load directions at angles below 30° tighten the sealing plug completely, to lock the toggle and avoid accidental unhooking.

Installation and Maintenance

  • You need a drill, a hole-saw and sealant; the screws are included. Part numbers (1–9) refer to the exploded view in the guide: 1 toggle, 2 self-tapping screws, 3 flush-deck base, 4 cap, 5 spring, 6 O-ring, 7 sealing plug, 8 spring ring, 9 ring nut.
  1. Positioning: install the base (3) in a deck area able to support high loads.
  2. Drilling: cut the hole with a hole-saw, size from the table above.
  3. Sealing: put sealant around the hole.
  4. Fixing: put the base (3) into the hole, secure it with the two self-tapping screws (2), then tighten the ring-nut (9) strongly. Two 5mm screws in the special threaded holes can be used to tighten the ring-nut.

Maintenance: very little water can enter the base, but drain it and clean the base occasionally: remove the spring ring (8) and unscrew the sealing plug (7).

Exploded Views

Antal TL22.33 exploded view and part list

Antal TL28.41 exploded view and part list

Shown: TL22.33, TL28.41. The exploded view and part list of every model are in the downloads below.

Spare Parts Index

Every part code printed on the Antal T-Lock exploded views, with the models it is fitted to. Codes listed as a kit are pre-assembled groups; their contents are shown in brackets. Quantities are on each exploded view.

Part code Description Material Fitted to
TD22.33 Loop & Toggle Various TL22.33 Ask us to source it →
TD28.41 Loop & Toggle Various TL28.41 Ask us to source it →
Y-L0046 Sealing plug Mekton TL22.33 Ask us to source it →
Y-L0047 Ring nut Aluminium TL22.33 Ask us to source it →
Y-L0048 Cap Mekton TL22.33 Ask us to source it →
Y-L0049 Spring ring S.Steel TL22.33 Ask us to source it →
Y-L0055 T-Lock 28 - Sealing plug Mekton TL28.41 Ask us to source it →
Y-L0056 Ring nut D74 x 8 - M54x1,5 Aluminium TL28.41 Ask us to source it →
Y-L0057 T-Lock 28 - Cap D41 x 26 Mekton TL28.41 Ask us to source it →
Y-L0058 Spring ring T-Lock 28 - De44 Df1,0 S.Steel TL28.41 Ask us to source it →
Y-L0185 Flush-deck base Aluminium TL28.41 Ask us to source it →
Y-L0187 Flush-deck base Aluminium TL22.33 Ask us to source it →
Y-X0793 Self-tapping screw S.Steel TL22.33 Ask us to source it →
Y-X1075 O-Ring Rubber TL22.33 Ask us to source it →
Y-X1076 O-Ring DIN 3771 34,6x2.62 - 3137 Rubber TL28.41 Ask us to source it →
Y-X1326 Compression spring S.Steel TL22.33 Ask us to source it →
Y-X1327 Compression spring MAC35 S.Steel TL28.41 Ask us to source it →
Y-X1339 Screw DIN 7981 M02,9 x 019 S.Steel TL28.41 Ask us to source it →

Using the Drawings

  • Each exploded view shows every part with its code in a balloon, plus the part list with material and quantity. Quote the model code and the part code when you ask us to source a spare.
  • Dimension drawings give the overall and fitting dimensions in mm, with weight and SWL in the title block where printed. Work from the printed figures rather than measuring a printout.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual