Antal Twin Halyard Blocks (PDF)

PARTS LIST

Exploded view with every Antal part code and the dimension drawing of the Antal H040 Twin Halyard Block - Size 40.

DocumentAntal Twin Halyard Blocks Exploded View & Dimension Drawing

FormatPDF · 1 page · 0.6 MB

LanguageEnglish

Download PDF ▾

Models and Drawings

Twin Halyard Block - Size 40, in Antal's Special blocks family.

Model	Description	Weight	SWL	Drawings
H040	Twin Halyard Block - Size 40	0.28 kg	3500 kg	Exploded view, Dimension drawing

Antal H040 exploded view

Part code	Part	Material	Fitted to
04219/A	Sheave	Aluminium	H040	Ask us to source it →
Y-B0936	Washer	Tufnol	H040	Ask us to source it →
Y-B0937	Washer	Brass	H040	Ask us to source it →
Y-B0939	THB frame	S.Steel	H040	Ask us to source it →
Y-B0940	Sheave carter	S.Steel	H040	Ask us to source it →
Y-B0941	Rivet	S.Steel HR	H040	Ask us to source it →
Y-B0942	THB - Threaded pin M12	S.Steel HR	H040	Ask us to source it →

Part codes, descriptions and materials as printed on the Antal parts lists; quantities are on the drawings.

Each exploded view names every component with its Antal code and material. Quote the model code and the part code when you ask us for a spare.
Where a drawing has a separate parts list for a sub-assembly (sheave assembly, caps kit, screw kit), those parts are included in the table above under the same model.
Dimension drawings give the overall dimensions, fixing-hole positions, weight and SWL (safe working load). Each sheet states its own scale: to check fit, print at full size with page scaling off and measure against a dimension printed on the sheet.
Weight and SWL are copied as printed on each sheet; – means the value was not read from the sheet, so check the PDF.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.