Forespar Marelon Scoop Strainers — Dimension Drawing
DIMENSION DRAWING
Part numbers, thread sizes and dimensions of the Forespar Marelon scoop strainers MF867 and MF868 and of the screen-only versions MF865 and MF866.
DocumentForespar Marelon Scoop Strainers Dimension Drawing
FormatPDF · 1 page · 0.3 MB
LanguageEnglish
Scoop Strainer Range
| Part # | Model | Thread size | A | B | C | D | |
|---|---|---|---|---|---|---|---|
| 906059 | MF867 | 3/4" (19.05 mm) | 1 1/32" (26.18 mm) | 2 1/4" (57.15 mm) | 1" (25.4 mm) | 3 1/8" (79.37 mm) | Ask us to source it → |
| 906060 | MF868 | 1 1/4" (31.75 mm) | 1 5/8" (41.27 mm) | 2 15/16" (74.42 mm) | 1" (25.4 mm) | 3 3/8" (85.72 mm) | Ask us to source it → |
| 906061 | MF865 | Screen only | – | – | 1" (25.4 mm) | 3 1/8" (79.37 mm) | Ask us to source it → |
| 906062 | MF866 | Screen only | – | – | 1" (25.4 mm) | 3 3/8" (85.72 mm) | Ask us to source it → |
The drawing on the sheet (MF868 values) shows A across the threaded body, B from the top of the thread down to the scoop, C as the depth of the scoop and D as the width of the scoop.
Installation Notes
- Made of non-corrosive Marelon, in two pieces for easier installation.
- The screen-only versions can be epoxied to the hull, so no additional holes are needed in the gel-coat.
- Scoop screens can also be fitted over other thru-hulls whenever a force feed is required; flush head thru-hulls are best.
- Available in 3/4" (19.05mm) and 1-1/4" (31.75mm) thread sizes.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
