INSTRUCTIONS

Dimensions and loads for every T32 car, CB track compatibility, minimum bend radius, block attachment, ball replacement, conversion to non-CB track and maintenance for the 32 mm Big Boat CB traveler cars.

DocumentHarken 32 mm Big Boat CB+ Traveler Cars Instructions
FormatPDF · 5 pages · 6.8 MB
LanguageEnglish
32 mm Big Boat CB+ Traveler Cars

Specifications

One-piece body machined from 6061-T6 aluminium, Hard Lube-anodized (PTFE coated), captive ball bearings in the car and control blocks. A = length, B = width, C = height.

Car Description Length A Width B Height C MWL Breaking load
T3201B Car / shackle 5 3/8" (136 mm) 3 11/32" (85 mm) 2 5/8" (73 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3201B.HL HL car / shackle 7 7/16" (188 mm) 3 11/32" (85 mm) 2 5/8" (73 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3202B Car / stand-up toggle 5 3/16" (132 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3202B.HL HL car / stand-up toggle 7 7/16" (188 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3203B Car / stand-up toggle / ears 5 3/16" (132 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3203B.HL HL car / stand-up toggle / ears 7 7/16" (188 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3204B Car / 2 stand-up toggles 9 1/8" (231 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 5000 lb (2268 kg) 10000 lb (4536 kg) View part →
T3204B.HL 2 HL cars / 2 stand-up toggles 15" (381 mm) 3 11/32" (85 mm) 3 1/2" (89 mm) 9000 lb (4082 kg) 18000 lb (8163 kg) View part →
T3205B Car / soft attachment 5 3/16" (132 mm) 3 11/32" (85 mm) 2" (50 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3205B.HL HL car / soft attachment 7 7/16" (188 mm) 3 11/32" (85 mm) 2" (50 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3221B Car / shackle / 2:1 5 3/8" (136 mm) 3 5/8" (98 mm) 2 5/8" (73 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3221B.HL HL car / shackle / 2:1 7 7/16" (188 mm) 3 5/8" (98 mm) 2 5/8" (73 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3222B Car / stand-up toggle / 2:1 5 3/8" (136 mm) 3 5/8" (98 mm) 2 5/8" (73 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3222B.HL HL car / stand-up toggle / 2:1 7 7/16" (188 mm) 3 5/8" (98 mm) 2 5/8" (73 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3224B Car / 2 stand-up toggles / 2:1 9 1/8" (231 mm) 3 5/8" (98 mm) 3 1/2" (89 mm) 5000 lb (2268 kg) 10000 lb (4536 kg) View part →
T3224B.HL 2 HL cars / 2 stand-up toggles / 2:1 15" (381 mm) 3 5/8" (98 mm) 3 1/2" (89 mm) 9000 lb (4082 kg) 18000 lb (8163 kg) View part →
T3231B Car / shackle / 3:1 5 3/8" (136 mm) 4" (101 mm) 2 5/8" (73 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3231B.HL HL car / shackle / 3:1 7 7/16" (188 mm) 4" (101 mm) 2 5/8" (73 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3232B Car / stand-up toggle / 3:1 5 3/8" (136 mm) 4" (101 mm) 3 1/2" (89 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3232B.HL HL car / stand-up toggle / 3:1 7 7/16" (188 mm) 4" (101 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3234B Car / 2 stand-up toggles / 3:1 9 1/8" (231 mm) 4" (101 mm) 3 1/2" (89 mm) 5000 lb (2268 kg) 10000 lb (4536 kg) View part →
T3234B.HL 2 HL cars / 2 stand-up toggles / 3:1 15" (381 mm) 4" (101 mm) 3 1/2" (89 mm) 9000 lb (4082 kg) 18000 lb (8163 kg) View part →
T3241B Car / shackle / 4:1 5 3/8" (136 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3241B.HL HL car / shackle / 4:1 7 7/16" (188 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3242B Car / stand-up toggle / 4:1 5 3/8" (136 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 3000 lb (1361 kg) 7000 lb (3175 kg) View part →
T3242B.HL HL car / stand-up toggle / 4:1 7 7/16" (188 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3243B.HL HL car / stand-up toggle / 4:1 7 7/16" (188 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 4500 lb (2041 kg) 9000 lb (4081 kg) View part →
T3244B Car / 2 stand-up toggles / ears / 4:1 9 1/8" (231 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 5000 lb (2268 kg) 10000 lb (4536 kg) View part →
T3244B.HL 2 HL cars / 2 stand-up toggles / 4:1 15" (381 mm) 4 3/8" (111 mm) 3 1/2" (89 mm) 9000 lb (4082 kg) 18000 lb (8163 kg) View part →

Track Compatibility

CB cars ship for CB track, with grooves at the waist for the keeper wires, first supplied by Harken in 2004.

Track Part no. Width A Height B Base C
Low-profile 3159, R32.1.5M, R32.2.1M, R32.3M, R32.3.6M, R32.6M, 3159.8, 3159.12 1 1/4" (32 mm) 3/4" (19 mm) 1 5/8" (42 mm)
High-beam 3156, R32HB.1.5M, R32HB.1.8M, R32HB.2.5M, R32HB.3.6M 1 1/4" (32 mm) 2 1/4" (57 mm) 1 3/16" (30 mm)

Curved track: minimum radius (vertical and horizontal bends)

Cars Minimum radius
3160 / 3163 / 3164 / 3176 / 3177; T3201B, T3202B, T3203B, T3205B, T3221B, T3222B, T3231B, T3232B, T3241B, T3242B 8 ft (2.44 m)
3161 / 3165 / 3166 / 3172 / 3178 / 3179; T3201B.HL, T3202B.HL, T3203B.HL, T3205B.HL, T3221B.HL, T3222B.HL, T3231B.HL, T3232B.HL, T3241B.HL, T3242B.HL, T3243B.HL 18 ft (5.49 m)
T3204B.HL, T3224B.HL, T3234B.HL, T3244B.HL 18 ft (5.49 m)
3167; T3204B, T3224B, T3234B, T3244B 24 ft (7.32 m)

High-beam track is designed for unsupported spans. The higher the car load, the shorter the span; longer HL cars need shorter spans. See the 32 mm high-beam spanning chart in the PDF.

Mounting

  • Position the car at the end of the track and roll it on gently. If it does not roll on easily, check that it is CB track.
  • Do not remove the ball retaining wires: the car will not roll without them (CB+ cars can be converted, see below).
  • Stand-up toggles fit specific Harken blocks; check mainsheet block compatibility in the 4521 instructions.
  • Soft attachment (T3205B, T3205B.HL): remove the stop screws and push the post out to fit loops or straps; refit with blue Loctite on the screws.

Controls

  • Reeving diagrams for 2:1, 3:1, 4:1 and 6:1, with ESP or ball bearing end controls, are in the PDF.
  • Premade splice: pass the eye through the bail and run the tail through to make a hitch.
  • If the line is too big, remove one screw and rotate the deadend eyestrap to load the splice; refit with blue Loctite.

Ball Replacement

Ball set Cars Car length Balls per car Balls Ball Ø
547 T3201B, T3202B, T3203B, T3205B, T3221B, T3222B, T3231B, T3232B, T3241B, T3242B 5 3/8" (136 mm) 50 Torlon, 25 per set 3/8" (10 mm) View part →
547 T3201B.HL, T3202B.HL, T3203B.HL, T3205B.HL, T3221B.HL, T3222B.HL, T3231B.HL, T3232B.HL, T3241B.HL, T3242B.HL, T3243B.HL 7 7/16" (188 mm) 72 Torlon, 25 per set 3/8" (10 mm) View part →
547 T3204B, T3224B, T3234B, T3244B 9 1/8" (231 mm) 90 Torlon, 25 per set 3/8" (10 mm) View part →
547 T3204B.HL, T3224B.HL, T3234B.HL, T3244B.HL (coupled cars, 72 each) 15" (381 mm) 144 Torlon, 25 per set 3/8" (10 mm) View part →

Car on edge, retaining clip in place: push one ball at a time in through the centre of the clip, let them roll into the return race, then add the rest. Do not overfill. Unload the same way; never remove the retaining clip.

Converting CB+ cars to old non-CB track (built through 2003)

Loader Car length
HBB1 5 3/8" (136 mm) View part →
HBB28 7 7/16" (188 mm) Ask us to source it →
HBB25 9 1/8" (231 mm) Ask us to source it →
  • CB+ cars only (+ stamp at one end, corner keepers from the beginning of 2015). Full instructions: traveler instructions 5070.
  • Push the retaining clip toward the end with a flat screwdriver, pry it off and dump the balls into a box; remove the clips and corner keepers.
  • Car on edge, load the lower side with the correct number of balls. Do not overload.
  • Remove two clips from the loader, slide it in with the loading port on the empty side, put one clip on the open end, load the rest of the balls through the port, line the loader up with the track and roll the car on.

Maintenance

  • Flush cars often with fresh water; periodically squirt detergent and water into the centre openings, roll the car back and forth, then flush the bearings.
  • No spray lubricants: the balls skid instead of rolling. Once car and track are dry, put 1–2 drops of McLube OneDrop on the ball contact surfaces of the track, roll the car through it several times and wipe off the rest. 1–2 drops of light machine oil also work; too much oil attracts dirt.
  • Clean the track with detergent and water. Teak cleaners and caustic solutions can discolour parts and are not covered by the warranty.
  • Inspect shackles and control block fittings often for fatigue and replace as needed. Every installation needs Harken track endstops; rig the controls so the car does not hit them under load.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Harken part no. Our part
T3201B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle
T3201B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle
T3202B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle
T3202B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle
T3203B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle, Control Tangs
T3203B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle, Control Tangs
T3204B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle
T3204B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle
T3205B Traveler Car 1 1/4 in (32.0 mm) - Loop Car
T3205B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Loop Car
T3221B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 2:1
T3221B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 2:1
T3222B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 2:1
T3222B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 2:1
T3224B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 2:1
T3224B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 2:1
T3231B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 3:1
T3231B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 3:1
T3232B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 3:1
T3232B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 3:1
T3234B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 3:1
T3234B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 3:1
T3241B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 4:1
T3241B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 4:1
T3242B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 4:1
T3242B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 4:1
T3243B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle, Control Tang - Purchase: 4:1
T3244B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 4:1
T3244B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 4:1
R32.1.5M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 4.9 ft (1.5 m)
R32.2.1M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 6.9 ft (2.1 m)
R32.3M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 9.8 ft (3.0 m)
R32.3.6M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 11.8 ft (3.6 m)
R32.6M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 19.7 ft (6.0 m)
R32HB.1.5M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 4.9 ft (1.5 m)
R32HB.1.8M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 5.9 ft (1.8 m)
R32HB.2.5M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 8.2 ft (2.5 m)
R32HB.3.6M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 8.2 ft (2.5 m)

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual