INSTRUCTIONS

Track part numbers, hole spacing and fasteners, curved-track limits, cutting and loader track, spanning and mounting rules for the 32 mm Big Boat CB traveler track.

DocumentHarken 32 mm Big Boat CB Traveler Track Instructions
FormatPDF · 3 pages · 0.3 MB
LanguageEnglish
32 mm Big Boat CB Traveler Track

Track Range

Extruded 6061-T6 aluminium, hardcoat anodized with black additive. 32 mm cars are CB style and only roll on CB track; older track without the waist grooves for the keeper wires must be replaced.

R32 low-beam CB track, 10 mm (3/8") FH fasteners

Part no. Length Mounting / pinstop spacing Endstop / trim cap Splice link
R32.1.5M 1.5 m (4' 11 1/16") 100 mm (3 15/16") E3200 / 3157 3153 View part →
R32.1.8M 1.8 m (5' 10 13/16") 100 mm E3200 / 3157 3153 View part →
R32.2.1M 2.1 m (6' 10 11/16") 100 mm E3200 / 3157 3153 View part →
R32.2.4M 2.4 m (7' 10 1/2") 100 mm E3200 / 3157 3153 View part →
R32.3M 3 m (9' 10 1/8") 100 mm E3200 / 3157 3153 View part →
R32.3.6M 3.6 m (11' 9 3/4") 100 mm E3200 / 3157 3153 View part →
R32.6M 6 m (19' 8 1/4") 100 mm E3200 / 3157 3153 View part →

R32HB high-beam CB track, slide bolts, 8 mm (5/16") HH

Part no. Length Endstop / trim cap Track riser
R32HB.1.5M 1.5 m (4' 11 1/16") 562 / 3158 1849 View part →
R32HB.1.8M 1.8 m (5' 10 7/8") 562 / 3158 1849 View part →
R32HB.2.1M 2.1 m (6' 10 11/16") 562 / 3158 1849 Ask us to source it →
R32HB.2.5M 2.5 m (8' 2 7/16") 562 / 3158 1849 View part →
R32HB.3.6M 3.6 m (11' 9 3/4") 562 / 3158 1849 View part →

3159 retrofit CB-style low-beam, 4" spacing, 8 mm (5/16") FH

Part no. Length Hole spacing Endstop / trim cap Splice link
3159.6 1.83 m (6') 102 mm (4") E3200 / 3157 3153 Ask us to source it →
3159.8 2.44 m (8') 102 mm (4") E3200 / 3157 3153 View part →
3159.12 3.66 m (12') 102 mm (4") E3200 / 3157 3153 View part →

Endstops and trim caps are sold in pairs. R32 mounting/endstop holes .404" (10.25 mm), pinstop holes .51" (13 mm).

Cutting and Loader Track

  • Holes for E32 end controls are pre-drilled if the full length is used.
  • If shortening, cut so the end control screw passes through a track fastening hole, centre 14 mm (9/16") from the end; drill 10.5 mm (13/32").
  • No room needed for trim caps with E32 end controls.
  • Loader track (cockpit installs, one end only): 164 mm (6 7/16") for 132 mm cars, 264 mm (10 3/8") for 188/232 mm cars.

Mounting

  • A4 (316) or A2 (18-8) stainless fasteners, large washers or backing plates, lock washers or locknuts.
  • Flat deck able to take at least twice the car's MWL; reinforce if needed.
  • Low-beam: through-bolt every hole with sealant. R32 uses 10 mm (3/8") FH; 3159 uses 8 mm (5/16") FH. Never span low-beam track.
  • High-beam: 8 mm (5/16") hexhead bolts on slides, one Mylar washer per bolt under the track, sealant, backing plate. Ships with 8 slides (HCP164) and washers (HCP131), or 10 over 2 m (7').
  • Spans: at least three bolts at each end, two right at the inboard end of the span, then 102 mm (4") centres.
Cars Car length Minimum curve radius
3160 / 3163 / 3164 / 3176 / 3177, T3201B–T3242B 136 mm (5 3/8") 2.44 m (8 ft)
3161 / 3165 / 3166 / 3172 / 3178 / 3179, T32xxB.HL 188 mm (7 7/16") 5.49 m (18 ft)
2 × 3163, T3204B.HL, T3224B.HL, T3234B.HL, T3244B.HL 381 mm (15") 2.44 m (8 ft)
3167, T3204B, T3224B, T3234B, T3244B 231 mm (9 1/8") 7.32 m (24 ft)

Radius limits apply to vertical and horizontal bends. The R32HB spanning chart (sail area vs span, mid- and end-boom, monohulls only) is on page 2 of the PDF.

Inspection and Maintenance

Inspect track, mounting hardware and endstops for loosening, cracks or damage.

  • Flush cars often with fresh water; periodically squirt a detergent/water solution into the centre openings, roll the car back and forth, then flush the bearings.
  • No spray lubricants: the balls skid instead of rolling. Use one to two drops of McLube OneDrop on the track ball surfaces (or light machine oil); too much oil attracts dirt.
  • Clean the track with detergent and water. Keep teak cleaners and caustics off.
  • Inspect shackles and control block fittings for fatigue. Every installation needs Harken endstops; rig the controls so the car does not hit them under load.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Harken part no. Our part
R32.1.5M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 4.9 ft (1.5 m)
R32.1.8M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 5.9 ft (1.8 m)
R32.2.1M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 6.9 ft (2.1 m)
R32.2.4M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 7.9 ft (2.4 m)
R32.3M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 9.8 ft (3.0 m)
R32.3.6M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 11.8 ft (3.6 m)
R32.6M Track 32.0 mm Low-Beam Pinstop - Aluminum - Length: 19.7 ft (6.0 m)
R32HB.1.5M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 4.9 ft (1.5 m)
R32HB.1.8M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 5.9 ft (1.8 m)
R32HB.2.5M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 8.2 ft (2.5 m)
R32HB.3.6M Track 32.0 mm High-Beam Variable Pinstop - Aluminum - Length: 8.2 ft (2.5 m)
3159.8 Track 32.0 mm Low-Beam - Aluminum - Length: 8.0 ft (2.4 m)
3159.12 Track 32.0 mm Low-Beam - Aluminum - Length: 12.0 ft (3.6 m)
3153 Batten Car Systems - Track Splice Link - For Track: 1 1/4 in (32.0 mm)
1849 CB Track - Riser Set - For Tracks: 1 1/16 in (27.0 mm)
T3201B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle
T3202B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle
T3203B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle, Control Tangs
T3205B Traveler Car 1 1/4 in (32.0 mm) - Loop Car
T3221B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 2:1
T3222B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 2:1
T3231B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 3:1
T3232B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 3:1
T3241B Traveler Car 1 1/4 in (32.0 mm) - Forged Shackle - Purchase: 4:1
T3242B Traveler Car 1 1/4 in (32.0 mm) - Stand-Up Toggle - Purchase: 4:1
T3201B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle
T3202B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle
T3203B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle, Control Tangs
T3205B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Loop Car
T3221B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 2:1
T3222B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 2:1
T3231B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 3:1
T3232B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 3:1
T3241B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Forged Shackle - Purchase: 4:1
T3242B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Stand-Up Toggle - Purchase: 4:1
T3204B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle
T3224B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 2:1
T3234B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 3:1
T3244B.HL Traveler Car 1 1/4 in (32.0 mm) - High-Load - Double Stand-Up Toggle - Purchase: 4:1
T3204B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle
T3224B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 2:1
T3234B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 3:1
T3244B Traveler Car 1 1/4 in (32.0 mm) - Double Stand-Up Toggle - Purchase: 4:1

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual