Harken 3282 Floating Jib Lead Ring — Instructions
INSTRUCTIONS
Dimensions, adjuster line size, rigging, and inspection and care for the Harken 3282 Floating Jib Lead Ring.
DocumentHarken 3282 Floating Jib Lead Ring Instructions
FormatPDF · 2 pages · 0.3 MB
LanguageEnglish
Specifications
| Dimension | mm | in |
|---|---|---|
| Jib lead throat Ø | 18 | .71 |
| Outside width | 49 | 1.94 |
| Outside height (front view) | 42 | 1.64 |
| Body thickness | 25 | .97 |
| Adjuster line channel | 8 | .31 |
| Max adjuster line Ø | 7 | 9/32 |
Machined 6061-T6 aluminium, Hard-Lube anodized. A low-weight alternative to blocks for floating jib leads, in-haulers and twings.
Rigging
- Pass the adjuster line through the channel under the dowel pins.
- Pass the sheet through the throat.
- McLube Sailkote can make the surface more slippery.
Do not spray the ring while it is on the boat: Sailkote overspray makes the deck slippery and can cause a fall or man overboard.
Maintenance
- Periodically inspect for wear, corrosion and loosening; check the fairlead, dowel pins, adjuster line and splices.
- Flush often with fresh water; periodically wash with mild detergent and rinse. Keep teak cleaner and caustics off.
- Clean before storage and store dry.
Parts in this Manual We Carry
Harken part numbers as printed in the instructions, matched to the genuine parts in our store.
| Harken part no. | Our part |
|---|---|
| 3282 | Low Friction Ring - 18mm |
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
