INSTRUCTIONS

Drill and fastener sizes, hole positions for 3159, R32 and R32HB track, and mounting for the 548 and 562 Traveler Endstop Set.

DocumentHarken 548 / 562 Traveler Endstop Set Instructions
FormatPDF · 2 pages · 3.3 MB
LanguageEnglish
548 / 562 Traveler Endstop Set

Fit and Fasteners

Part no. Endstop Track Height (add to screw length)
548 Through-bolt, low beam 3159, R32 30 mm (1 3/16") View part →
562 Through-bolt, high beam R32HB 68 mm (2 11/16") View part →

Drill bit 8.5 mm (21/64"). Fasteners: 8 mm (5/16") flathead stainless machine screws, two per endstop, with washers and locknuts.

Bolt the track down and put the traveler car on it before securing the endstops.

548 on Low-Beam Track

  • Hole placement differs between 3159 and R32: plan any cut to use or avoid existing holes.
  • 3159: drill as drawn, 9 mm (3/8") and 36 mm (1 7/16") from the end.
  • R32: drill one hole from the underside 40 mm (1 9/16") from the end, then cut 4 mm (5/32") off the end.
  • The outboard fastener bears against the outboard side of the existing hole.

562 on R32HB

  • Through-bolt: drill as drawn, 14 mm (9/16") and 41 mm (1 5/8") from the end.
  • Or slip two 8 mm (5/16") hex nuts into the channel under the track and use 8 mm × 63 mm (5/16-18 × 2 1/2") flathead stainless screws.
  • Use stop knots so cars do not hit the endstops under load.

Inspection and Maintenance

  • Flush cars often with fresh water; periodically squirt a detergent/water solution into the centre openings, roll the car back and forth, then flush the bearings.
  • No spray lubricants: the balls skid instead of rolling. Use one to two drops of McLube OneDrop on the track ball surfaces (or light machine oil); too much oil attracts dirt.
  • Clean the track with detergent and water. Keep teak cleaners and caustics off.
  • Inspect shackles and control block fittings for fatigue. Every installation needs Harken endstops; rig the controls so the car does not hit them under load.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual