INSTRUCTIONS

Mounting fasteners, line range and cam arm angle adjustment for the 9051 Micro Cam Swivel Base.

DocumentHarken 9051 Micro Cam Swivel Base Instructions
FormatPDF · 1 page · 0.1 MB
LanguageEnglish
9051 Micro Cam Swivel Base

Specifications

Part no. Mounting fasteners Min line Ø Max line Ø Cam arm angle
9051 5 mm or #10 flathead 3 mm (1/8") 6 mm (1/4") 5° to 17° from the deck

Adjusting the Cam Angle

  • Loosen the two top screws above the sheaves with a 3 mm hex key.
  • Set the cam arm to the angle you want and retighten the screws.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual