INSTRUCTIONS

Which Battcars are CB+, ball counts, ball kits and car loaders by car, the step-by-step conversion to old-style non-CB track, and maintenance.

DocumentHarken Battcar CB+ Conversion for Non-CB Track Instructions
FormatPDF · 4 pages · 0.4 MB
LanguageEnglish
Battcar CB+ Conversion for Non-CB Track

Cars, Balls and Loaders

CB (captive bearing) track has deeper grooves for the car retaining clips and has been built since 2002 (track built after 2002 needs no conversion). CB+ cars, stamped + at one end, can be converted to run on older non-CB track. Corner keepers were introduced at the beginning of 2015.

Car Type Width Length Balls per car Ball kit Car loader
3811 System A headboard CB+ 56 mm (2 3/16") 105 mm 60 × 2 177 (21 × 6 mm) Order HSB116 × 2
3812 System A intermediate CB+ 56 mm 57 mm 32 177 Order HSB116
3829, 3830, 3831, 3881 System A Battcar CB+ 56 mm 73 mm 40 177 Order HSB116
3882, 3883 System A high-load CB+ 56 mm 105 mm 60 177 Order HSB116
1792, 1807 System A headboard Non-CB 56 mm 92 mm 52 × 2 177 HSB116 × 2 included
1925, 1901, 1944, 1976, 1977 System A batten Non-CB 56 mm 76 mm 40 177 HSB116 included
1894 System A luff car Non-CB 56 mm 54 mm 30 177 HSB116 included
3852 System B headboard CB+ 70 mm (2 3/4") 132 mm 60 × 2 1526 (25 × 8 mm) Order HMR2 × 2
3863 System B intermediate CB+ 70 mm 68 mm 28 1526 Order HMR2
3856, 3857, 3859, 3879 System B Battcar CB+ 70 mm 109 mm 48 1526 Order HMR2
3860 System B reef car CB+ 70 mm 132 mm 60 1526 Order HMR2
1793 System B headboard Non-CB 70 mm 111 mm 48 × 2 1526 HMR2 × 2 included
1979 System B intermediate Non-CB 70 mm 97 mm 40 1526 HMR2 included
1794, 1826, 1902, 1946, 1978, 1980 System B batten Non-CB 70 mm 97 mm 40 1526 HMR2 included
1895 System B luff car Non-CB 70 mm 70 mm 30 1526 HMR2 included
3867 System C headboard CB+ 85 mm (3 5/16") 232 mm 90 × 2 547 (25 × 10 mm) Order HBB25 × 2
3871 System C intermediate CB+ 85 mm 96 mm 34 547 Order HBB1
3868, 3869, 3870, 3872 System C Battcar CB+ 85 mm 136 mm 50 547 Order HBB1
3873 System C reef car CB+ 85 mm 231 mm 90 547 Order HBB25
1782 System C headboard Non-CB 85 mm 140 mm 52 × 2 547 HBB1 × 2 included
1784, 1795, 1827, 1828, 1829, 1903 System C batten Non-CB 85 mm 121 mm 44 547 HBB1 included
1785 System C luff car Non-CB 85 mm 102 mm 36 547 HBB1 included
1785HL System C high-load luff car Non-CB 85 mm 102 mm 36 547 HBB1 included

Ball kits: 177 holds 21 balls of 1/4" (6 mm); 1526 and 547 hold 25 balls of 5/16" (8 mm) and 3/8" (10 mm). Car loaders by system: A HSB116, B HMR2, C HBB1 or HBB25.

Converting CB+ Cars to Non-CB Track

  • Work over a box to catch the balls. Push each retaining clip toward the end with a flat screwdriver, pry it off and dump the balls.
  • Remove the retaining clips and corner keepers.
  • Hold the car on edge and load the lower side with the correct number of balls from the chart. Do not overload.
  • Remove two clips from the car loader and slide it in with the loading port on the empty side.
  • Put one clip on the open end of the loader, load the remaining balls through the port, line the loader up with the track and gently roll the car on.
  • Do not refit the corner keepers.

Maintenance

  • Inspect Battcars often for loose locknuts and batten receptacles for loose screws; replace as needed.
  • Flush with fresh water; periodically squirt detergent solution into the centre openings and roll the car back and forth.
  • No spray lubricants: the balls skid instead of rolling. 1–2 drops of McLube OneDrop (or light machine oil) on the track ball surfaces, roll through, wipe off the excess.
  • Clean the track with detergent and water; keep teak cleaners and caustics off.
  • Full Battcar installation manuals: 4248, 4286 and 4637.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Harken part no. Our part
HSB116 Car Loader - For Tracks: 13/15 in (22.0 mm)
3811 Headboard Cars - CB - Battcar System A - 7/8 in (22.0 mm) - Assembly
3812 Batten Car System - Intermediate Car (CB) - For Battcar System A: 22 mm
3829 Batten Car Slider w/ Joint - A Battcar System - 10mm Stud (73mm Car Length)
3830 Batten Car Receptacle - Battcar CB - For Battcar System: 0.87 in (22 mm) - Dia: 0.63 in (16 mm)
3831 Batten Car Sliders (CB Universal) w/ Ball Bearings - For Battcar System A: 0.87 in (22 mm)
3881 Batten Car Slider w/ Joint - A Battcar System - 12mm Stud (73mm Car Length)
3882 Batten Car Slider w/ Joint - A Battcar System - 12mm Stud (105mm Car Length)
3883 Batten Reefing Car - For Battcar System A - 22mm Track - Boats up to 90 ft - L: 105mm & SWL: 397 kg
3852 Headboard Cars - CB - Battcar System B - 1 1/16 in (27.0 mm) - Assembly
3863 Batten Car System - Intermediate Car (CB) - For Battcar System B: 27 mm
3856 Batten Car Slider w/ Joint - B Battcar System - 10mm Stud (108mm Car Length)
3857 Batten Car Slider w/ Joint - B Battcar System - 12mm Stud (108mm Car Length)
3859 Batten Car Sliders (CB Universal) w/ Ball Bearings - For Battcar System B: 1.06 in (27 mm)
3879 Batten Car Slider w/ Joint - B Battcar System - 14mm Stud (108mm Car Length)
3860 Batten Reefing Car - For Battcar System B - 27mm Track - Boats up to 60 ft - L: 132mm & SWL: 725 kg
3867 Headboard Cars - CB - Battcar System C - 1 1/4 in (32.0 mm) - Assembly
3871 Batten Car System - Intermediate Car (CB) - For Battcar System C: 32 mm
3868 Batten Car Slider w/ Joint - C Battcar System - 12mm Stud (136mm Car Length)
3869 Batten Car Slider w/ Joint - C Battcar System - 14mm Stud (136mm Car Length)
3870 Batten Car Slider w/ Joint - C Battcar System - 16mm Stud (136mm Car Length)
3872 Batten Car Sliders (CB Universal) w/ Ball Bearings - For Battcar System C: 1.26 in (32 mm)
3873 Batten Reefing Car - For Battcar System C - 32mm Track - Boats up to 90 ft - L: 231mm & SWL: 1429 kg
1526 Torlon Ball Bearings - Dia: 5/16 in (8.0 mm) - Balls: 25

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual