INSTRUCTIONSFit check, the safety test for powered winches, maintenance and the full parts list for the B10HOT Carbo Grip & Go locking winch handle.
DocumentHarken Carbo Grip & Go Locking Winch Handle Instructions
FormatPDF · 3 pages · 0.7 MB
LanguageEnglish
Using the Handle
- Part number B10HOT. The handle fits most winches, but check in any winch brand that it locks and releases before you use it.
- Do not use the handle body to steady yourself: the grab bar can compress accidentally, release the handle from the winch and cause injury.
Before first use on an electric or hydraulic winch, check that the disconnect rod locks out the motor: insert the handle, stand clear and push the power button. The handle must not spin.
Maintenance
- Flush the handle often with fresh water to keep it clean and free-running.
- Periodically clean with a mild detergent and water solution: spin the grip and knob, press the grab bar and work the lock pin mechanism to spread the solution, then flush with fresh water.
- The M5 × 10 screw (HFS334) is assembled with one drop of blue Loctite.
Parts in this Manual We Carry
Harken part numbers as printed in the instructions, matched to the genuine parts in our store.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual