INSTRUCTIONS

Track heights and lengths, the complete parts list, mounting, car removal and maintenance for the Crossbow pivoting self-tacking jib track system.

DocumentHarken Crossbow Self-Tacking Jib Track Instructions
FormatPDF · 2 pages · 0.6 MB
LanguageEnglish
Crossbow Self-Tacking Jib Track

Specifications

Part no. Height (H) Length (L)
2758.950MM.20 20 mm 950 mm View part →
2758.1.1M.20 20 mm 1168 mm View part →
2758.1.1M.50 50 mm 1168 mm View part →

Mounting fasteners: 3/16", #10 or 5 mm.

Mounting

  • Use a straight edge or chalk line to make sure the mounting holes line up.

Removing the Car

  • Press the sides of the car together before removing it so the race endcap holds the balls in place.
  • If the race endcap is not pressed home, the balls will escape.

Maintenance

  • Flush the balls and track hinges with liquid detergent and fresh water.
  • Once dry, use a single drop of OneDrop in each ball race.

Parts List

Part no. Pos. Description
H-62502 — Car assembly Ask us to source it →
HFS1068 1 Locking nut M4 × .7 Ask us to source it →
AL-1211 2 Car body half (2) Ask us to source it →
MP-122 3 1/4" Delrin ball (4) Ask us to source it →
MP-117 4 3/16" Torlon ball (42) Ask us to source it →
MP-1964 5 Race endcap (2) Ask us to source it →
H-62282 6 Socket head cap screw M4 × 0.7 × 20 mm Ask us to source it →
MS-002 7 Retaining ring, beam / deck mounting pad (3) Ask us to source it →
SP-035 8 Clevis pin 3/16" × 1.375" (3) Ask us to source it →
H-63163 9 Stamped anchor (3) Ask us to source it →
H-63456 10 Track assembly 1100 mm L × 20 mm H Ask us to source it →
H-64895 11 Track assembly 950 mm L × 20 mm H Ask us to source it →
H-63457 12 Track assembly 1100 mm L × 50 mm H Ask us to source it →

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual