INSTRUCTIONSPart numbers and the stanchion clamp installation warning for Harken furling lead blocks 7401–7407.
DocumentHarken Furling Lead Blocks Instructions
FormatPDF · 2 pages · 0.8 MB
LanguageEnglish
Installation
- The clamp does not need to sit flush with the cheek.
- Tighten the fasteners only enough to stop the block assembly moving on the stanchion.
Do not over-torque the fasteners: hand-torque only with a 4 mm Allen wrench. Over-torquing can pull the insert out.
Parts in this Manual We Carry
Harken part numbers as printed in the instructions, matched to the genuine parts in our store.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual