INSTRUCTIONS

Parts list, tools, mast tang and boom eyestrap location charts, drilling sizes, rigging and adjustment for the Harken 254 Lazy Jack Kit.

DocumentHarken Lazy Jack Kit 254 Instructions
FormatPDF · 8 pages · 0.3 MB
LanguageEnglish
Lazy Jack Kit 254

Kit Contents

For boats 35–42 ft (10.7–12.8 m) with booms 12–16 ft (3.7–4.9 m). The boat must have a topping lift or a vang that holds the boom up, so the main does not snag when hoisting.

Part no. Item
H073 Stainless steel eyestraps Ask us to source it →
H132 Big Bullet cheek block Ask us to source it →
Item
2 × 6' (1.82 m) wire assemblies including blocks and mast tangs
2 × 30'6" (9.29 m) upper line assemblies with blocks
1 × 104' (31.69 m) adjusting line
1 × 4" (101 mm) aluminium cleat
21 × 3/16" (4.76 mm) stainless steel rivets (3 extra)
21 × 10-32 × .375 slotted trusshead machine screws
3 × #10 × 1 1/4" (32 mm) flathead self-tapping screws (1 extra)
3 × 10-32 × 3/4" (19 mm) trusshead machine screws (1 extra)
3 × #10 × 3/4" (19 mm) trusshead self-tapping screws (1 extra)

Installation

Drilling

  • Mast tang and eyestraps, screws: 5/32" (4 mm) drill and 10-32 tap.
  • Rivets: 13/64" (5 mm) drill. Stainless rivets need a heavy-duty rivet gun.
  • Mast tang: four holes from the template, attached starting with the centre holes.
  • Cheek block: 3/4" (19 mm) trusshead machine or self-tapping screws, 5/32" (4 mm) holes.
  • Cleat: 5/32" (4 mm) holes, #10 × 1 1/4" flathead sheet metal screws. File the ends off so they do not foul internal boom lines.

Layout

  • Mast tangs on the widest part of the mast, at the Chart A height above the boom.
  • String the upper line assemblies so the splice is forward and the blocks aft.
  • Forward eyestraps: one each side at the forward marks, feet aligned vertically, carrying the upper line eye splices.
  • Cheek block at the middle mark, sheave side toward the cleat; middle eyestrap with the adjusting line eye splice on the opposite side.
  • Split the 104' (31.69 m) adjusting line into two coils without cutting it; reeve each through the lower blocks so it cradles under the boom.
  • Aft eyestraps: captivate the line each side at the aft marks.

When drilling the mast with someone aloft, do not let the drill bit touch the halyard holding them: it can cause the halyard to fail. Limit drill depth, use a safety halyard, and keep everyone clear of dropped tools.

Hardware Location Charts

Chart A – mast tang location

Luff length or P (ft) Luff length or P (m) Tang height above boom (ft) Tang height above boom (m)
35'7" to 36' 10.85 - 10.97 m 23'5" 7.14 m
36'1" to 36'6" 11.00 - 11.13 m 23'9" 7.24 m
36'7" to 37' 11.15 - 11.28 m 24'1" 7.34 m
37'1" to 37'6" 11.30 - 11.43 m 24'4" 7.42 m
37'7" to 38' 11.46 - 11.58 m 24'8" 7.52 m
38'1" to 38'6" 11.61 - 11.73 m 25' 7.62 m
38'7" to 39' 11.76 - 11.89 m 25'4" 7.72 m
39'1" to 39'6" 11.91 - 12.04 m 25'8" 7.82 m
39'7" to 40' 12.07 - 12.19 m 26' 7.92 m
40'1" to 40'6" 12.22 - 12.34 m 26'4" 8.03 m
40'7" to 41' 12.37 - 12.50 m 26'8" 8.13 m
41'1" to 41'6" 12.52 - 12.65 m 27' 8.23 m
41'7" to 42' 12.67 - 12.80 m 27'4" 8.33 m
42'1" to 42'6" 12.83 - 12.95 m 27'7" 8.41 m
42'7" to 43' 12.98 - 13.11 m 27'11" 8.51 m
43'1" to 43'6" 13.13 - 13.26 m 28'3" 8.61 m
43'7" to 44' 13.28 - 13.41 m 28'7" 8.71 m
44'1" to 44'6" 13.44 - 13.56 m 28'11" 8.81 m
44'7" to 45' 13.59 - 13.72 m 29'3" 8.92 m
45'1" to 45'6" 13.74 - 13.87 m 29'7" 9.02 m
45'7" to 46' 13.89 - 14.02 m 29'11" 9.12 m
46'1" to 46'6" 14.05 - 14.17 m 30'3" 9.22 m
46'7" to 47' 14.20 - 14.33 m 30'7" 9.32 m
47'1" to 47'6" 14.35 - 14.48 m 30'10" 9.40 m
47'7" to 48' 14.50 - 14.63 m 31'2" 9.50 m

Chart B – boom hardware location

E or foot (ft) E or foot (m) Forward eyestraps Cheek block and middle eyestraps Aft eyestraps
11'7" to 12' 3.53 - 3.66 m 2'4" (.70 m) 5'6" (1.676 m) 8'10" (2.692 m)
12'1" to 12'6" 3.68 - 3.81 m 2'6" (.76 m) 5'9" (1.753 m) 9'3" (2.819 m)
12'7" to 13' 3.84 - 3.96 m 2'7" (.79 m) 6' (1.829 m) 9'7" (2.921 m)
13'1" to 13'6" 3.99 - 4.11 m 2'8" (.82 m) 6'3" (1.905 m) 10' (3.048 m)
13'7" to 14' 4.14 - 4.27 m 2'10" (.85 m) 6'6" (1.981 m) 10'4" (3.150 m)
14'1" to 14'6" 4.29 - 4.42 m 2'11" (.88 m) 6'9" (2.057 m) 10'9" (3.277 m)
14'7" to 15' 4.45 - 4.57 m 3' (.91 m) 6'11" (2.108 m) 11'1" (3.378 m)
15'1" to 15'6" 4.60 - 4.72 m 3'1" (.94 m) 7'2" (2.184 m) 11'6" (3.505 m)
15'7" to 16' 4.75 - 4.88 m 3'2" (.97 m) 7'5" (2.261 m) 11'10" (3.607 m)

Mark each side of the boom. Check sail containment before drilling: tape the hardware in place, reeve the lines and lower the sail, then move if necessary.

Adjustment and Use

Hoist the main, uncleat the adjusting line, sheet the mainsheet as hard as it goes to find the lowest boom position, then tighten the adjusting line and slack it about 3" so it does not affect sail shape.

  • Before sailing, swing the boom out against the spreader tips at the dock and shake it to see whether the lazy jacks swing behind the spreaders.
  • If they snag under sail, free them before trimming the main to the centreline, or you risk breaking a spreader.
  • Snag-prone: rig shock cord on each side from at or near the gooseneck up to the hanging blocks; if that fails, lower the mast tangs.
  • Hoist head-to-wind and watch aloft: headboard or battens can catch between mast and lazy jacks. Forcing the halyard can break a batten, rip the sail or damage the lazy jacks.
  • Using the topping lift and leaving the lazy jacks slightly loose lets them deflect out of the way.
  • Hold the lazy jacks open with shock cord from the lower spreader tips (hog rings covered with rigging tape); test the length with the boom fully out.
  • With conventional slugs, use mast gate plates so the slugs stay in the groove below the gate.

Parts in this Manual We Carry

Harken part numbers as printed in the instructions, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual