INSTALLATION & MAINTENANCE MANUAL

Ratios, working load, dimensions, deck mounting, strip-down, torques and the parts list for the Performa 46.2 PT plain-top winch.

DocumentHarken Performa 46.2 PT Plain-Top Winch Installation & Maintenance Manual
FormatPDF · 16 pages · 2.2 MB
LanguageEnglish
Performa 46.2 PT Plain-Top Winch

Specifications

Power ratio Gear ratio
1st speed 11.70 : 1 2.30 : 1
2nd speed 46.50 : 1 9.17 : 1

The theoretical power ratio does not take friction into account.

Version Weight
PT 5.1 kg
Dimension mm
Base Ø 184
Top Ø 101
Height 181
Line entry height 90

Maximum working load (MWL): 1300 kg (2866 lb). Loads above the MWL can make the winch fail or pull off the deck.

Installation

  • Mount on a flat area of deck, reinforced if needed to take at least twice the MWL. Bolts are not supplied.
  • Five M8 bolts through Ø8.2 mm holes on a Ø150 mm bolt circle.
  • A4 stainless bolts only (DIN 267 part 11). No countersunk bolts.
  • Sheet entry angle 8° ±2°, with the drive gear where the sheet enters the drum.
  • Fill the holes with marine sealant and clear excess from the base drain channels.
  • A drilling template is on harken.com.

Getting the Drum Off

  • Unscrew the central screw.
  • Slide off the hub (27), the cover (26) and the washer (30).
  • Lift off the drum (22), then bolt the base down with socket-head bolts.

Maintenance

Strip-down after the drum is off: unscrew the three screws (25) and remove the socket support, slide out the central shaft (19), unscrew the five hex screws (16) and remove the housing (15). Washer (12) may stay inside the drum support, and washer (29) must go back in its correct position. Then gear (14), washer (12), the gearing (9) and its pawls (7), gear (2), pinion (10), gear (5) and washer (4). Check the balls in the drum race and push any loose ones back in.

Routine

  • Wash with fresh water frequently, and after every use.
  • Keep teak cleaners and caustic products off the winch, especially anodized, chromed and plastic parts.
  • No solvents, polishes or abrasive pastes on logos and stickers.
  • Keep the holes and drain channels in the base clear so water cannot collect.
  • Inspect visually at the start and end of every season; full overhaul, clean and lubricate at least every 12 months.
  • Replace worn or damaged parts with original Harken parts only.

Overhaul

  • Tools: medium flat screwdriver, 5 mm hex key, rags.
  • Clean metal parts with a residue-free degreaser; rinse plastic parts in fresh water; dry with cloths that leave no residue.
  • Check gear and ring-gear teeth, roller bearings and cages, pins and pawls for wear or corrosion.
  • Brush Harken grease lightly on gears, gear pins, teeth and moving parts. Excess grease reaching the pawls can compromise safety.
  • Oil the pawls and springs lightly. Never grease the pawls.
Fastener Torque
Central screw 2 Nm (18 in-lb)
Housing hex screws (16, five) 20 Nm (177 in-lb)

To fit a pawl, seat the spring in its housing, hold it closed and slide the pawl in. Check each pawl opens and closes easily with a finger.

Spare Parts

From the Performa 46.2 PTP parts list. Parts marked * come in the Harken service kit.

Harken code Pos. Description
A96633300 1 Performa assy base Winch 46 View part →
S413020004 2 Gear Z12 View part →
S413300004 3 Pin Ø12 × 60 View part →
S278170002 4 Washer Ø12.5 × Ø48 × 1.5 View part →
S413260004 5 Gear Z27 View part →
S414260004 6 Pawls carrier Ø8xN2 View part →
S000090004 7 Racing pawl Ø8 * (6) View part →
S000380001 8 Pawl spring Ø8 * (6) View part →
S412830041 9 Gear Z23 View part →
S413250041 10 Pinion Z13 View part →
M6017694 11 IGUS bushing PSM-1214-20 (2) Ask us to source it →
S413120002 12 Washer Ø22.5 × Ø45 × 1 View part →
S413070004 13 Pin Ø9 × Ø12 × 32.5 View part →
A94133400 14 Assy gear Z12 View part →
A94132200 15 Assy housing Winch 46 View part →
M0606303 16 Screw M8 × 25 UNI 5931 (5) View part →
A74133700 17 Bearing Ø75 × Ø87 × 26 (2) View part →
S413390080 18 Spacer View part →
A94189400 19 Assy central shaft Winch 46 Ask us to source it →
S4151400A0 21 Socket support PT View part →
A96572300 22 Performa W46 drum (with bearing ring and 61 balls 3/16") View part →
S657340153 23 Performa plain top W46 Ask us to source it →
M0603703 24 Screw M6 × 12 UNI 5931 (4) Ask us to source it →
M0600903 25 Screw M6 × 20 UNI 5931 (3) Ask us to source it →
S416190153 26 Cover W46 PT View part →
A94136400 27 Assembly socket W20-80 View part →
S415220080 28 PT spacer View part →
S657300052 29 Performa shim W46 Ask us to source it →
S678730082 30 Washer Ø57.5 × Ø93 × 1.5 Ask us to source it →

Ordering Spare Parts

Quote the Harken part number from the parts list and the winch serial number, printed on the plate on the drum support.

Parts in this Manual We Carry

Harken part numbers as printed in the installation & maintenance manual, matched to the genuine parts in our store.

Harken part no. Our part
A96633300 Winch Spare for Performa Size 46 - Base Assembly
S4152300A7 Winch Spare for Radial Size 35 to 40 - Bushing Igus (22 x 25 x 9.5 mm)
S414890080 Winch Spare for Radial Size 35 to 40 - Bushing Housing (9 x 11 x 7)
S413330085 Winch Spare for Radial Size 46 - Bushing (12 x 14 x 11)
S413020004 Winch Spare for Radial Size 35 to 50 - Gear Z12
S413300004 Winch Spare for Radial Size 46 - Pin (12x60)
S278170002 Winch Spare for Radial Size 46 to 70 - Washer (12.5 x 48 x 1.5)
S413260004 Winch Spare for Radial Size 46 - Gear Z27
S414260004 Winch Spare for Radial Size 46 to 50 - Pawls Carrier (8 x N2)
S000090004 Winch Spare for Performa Size 35 to 70 - Pawl 8 Dia. 17-4PH (B009)
S000380001 Winch Spare for Radial & Performa Size 15 to 80 - Pawl Spring (B038)
S412830041 Winch Spare for Radial Size 35 to 46 - Gear Radial Z23
S413250041 Winch Spare for Radial Size 46 - Pinion - Z13
S413120002 Winch Spare for Radial Size 35 to 70 - Washer (22.5 x 45 x 1)
S413070004 Winch Spare for Radial Size 35 to 50 - Pin
A94133400 Winch Spare for Radial Size 46 - Assy Gear Z12
A94132200 Winch Spare for Radial & Performa Size 46 - Housing Assembly
M0606303 Winch Spare for Radial Size 46 to 70 - Screw (M8x25 UNI 5931)
A74133700 Winch Spare for Radial & Performa Size 35 to 40 - Bearing Cage (75 x 87 x 26)
S413390080 Winch Spare for Radial Size 46 - Spacer
S413880002 Winch Spare for Radial Size 35 to 50 - Center Shaft Washer
S4151400A0 Winch Spare for Radial Size 20 to 46 - Socket Support
A96572300 Winch Spare for Performa Size 46 - Drum Assembly
S416190153 Winch Spare for Performa Size 46 - Cover
A94136400 Winch Spare for Radial Size 15 to 80 - Assembly Socket
S415130085 Winch Spare for Radial Size 20 to 35 - Washer Socket
M0614303 Winch Spare for Radial & Performa Size 15 to 80 - Screw (M8x20 UNI 6109)
S415220080 Winch Spare for Radial Size 46 - Socket Washer/Spacer
— Plain Top Winch Performa Size 46 - Aluminum Black / Two Speed

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual