INSTALLATION & MAINTENANCE MANUAL

Ratios, working load, dimensions, deck mounting, service torques and the parts list for the Radial 46.2 PT plain-top winch (BBB and CCC versions).

DocumentHarken Radial 46.2 PT Plain-Top Winch Installation & Maintenance Manual
FormatPDF · 17 pages · 2.2 MB
LanguageEnglish
Radial 46.2 PT Plain-Top Winch

Specifications

Power ratio Gear ratio
1st speed 11.70 : 1 2.30 : 1
2nd speed 46.50 : 1 9.17 : 1

The theoretical power ratio does not take friction into account.

Version Weight
PT BBB / CCC 9.70 kg

BBB = all bronze. CCC = all-chrome bronze.

Dimension mm
Height 181
Drum Ø 101
Line entry height 90
Base Ø 184

Maximum working load (MWL) of the Radial 46.2 PT: 1300 kg (2866 lb). Loads above the MWL can make the winch fail or pull off the deck suddenly.

Installation

  • Flat area of deck, reinforced if needed to take at least twice the MWL.
  • Five Ø8.2 mm holes; five M8 bolts (not supplied by Harken).
  • A4 stainless bolts only (DIN 267 part 11). No countersunk bolts.
  • Sheet entry angle 8° ±2°, with the drive gear where the sheet enters the drum.
  • Fill the holes with marine sealant and keep the base drain channels clear.

Procedure

  • Remove the drum and use socket-head (SH) and hex-head (HH) bolts.
  • Unscrew the central screw, 2 Nm (18 in-lb).
  • Slide off the socket and the cover, then lift off the drum.
  • Bolt down the base, then reassemble in reverse order with the maintenance products.
  • A drilling cut-out template is available on harken.com.

Maintenance

Routine

  • Wash with fresh water frequently, and after every use.
  • Keep teak cleaners and caustic products off anodized, chromed and plastic parts.
  • No solvents, polishes or abrasive pastes on logos, stickers, anodized, chromed or plastic surfaces.
  • Inspect visually at the start and end of every season.
  • Full overhaul, clean and lubricate at least every 12 months; replace worn parts with original parts only.

Overhaul

  • Tools: medium flat screwdriver, 5 and 6 mm hex keys, rags.
  • Clean metal parts with a residue-free degreaser; rinse plastic parts in fresh water.
  • Check gear and ring-gear teeth, roller bearings and cages, pins and pawls for wear or corrosion.
  • Grease gears, pins and teeth lightly with Harken grease, applied with a brush.
  • Oil the pawls and springs only. Never grease the pawls: excess grease on the pawls compromises safety.
Fastener Torque
Central screw 2 Nm (18 in-lb)
Housing hex screws (5) 8 Nm (71 in-lb)

Strip-down order: socket and cover, drum, the three socket-support screws, central shaft, housing screws, housing. A washer may stay inside the housing. Refit each pawl with its spring and check it opens and closes with a finger.

Radial 46.2 PT Spare Parts

From the PT BBB parts list in the manual. Parts marked * come in the Harken service kit. Multi-part assemblies are listed by assembly code; sub-part codes are in the PDF.

Harken code Pos. Description
A96633300 1 Base assembly Winch 46 View part →
S413020004 2 Gear Z12 View part →
S413300004 3 Pin Ø12 × 60 View part →
S278170002 4 Washer Ø12.5 × Ø48 × 1.5 View part →
S413260004 5 Gear Z27 View part →
S414260004 6 Pawl carrier Ø8 × N2 View part →
S000080003 7 Pawl Ø8 * View part →
S000380001 8 Pawl spring Ø8 * View part →
S412830041 9 Gear Z23 View part →
S413250041 10 Pinion Z13 View part →
M6017694 11 Bushing PSM-1214-20 Ask us to source it →
S413120002 12 Washer Ø22.5 × Ø45 × 1 View part →
S413070004 13 Pin Ø9 × Ø12 × 32.5 View part →
A94133400 14 Gear Z12 assembly View part →
A94132200 15 Housing assembly Winch 46 View part →
M0606303 16 Screw M8 × 25 UNI 5931 View part →
A74133700 17 Bearing Ø75 × Ø87 × 26 View part →
S413390080 18 Spacer View part →
A94189400 19 Central shaft assembly Winch 46 Ask us to source it →
S4151400A0 21 Socket support PT View part →
S688150043 22 Drum W46 BBB Ask us to source it →
S281690097 23 Red line View part →
S688030043 24 Plain top W46 BBB Ask us to source it →
S678730082 25 Washer Ø57.5 × Ø93 × 1.5 Ask us to source it →
M0603703 26 Screw M6 × 12 UNI 5931 Ask us to source it →
M0600903 27 Screw M6 × 20 UNI 5931 Ask us to source it →
S688110043 28 Cover W46 PT BBB Ask us to source it →
A94136400 29 Socket assembly W20–80 View part →
S415220080 30 PT spacer View part →
M0619580 31 Ball 3/16" Ask us to source it →

Codes that change by version

CCC codes come from the manual; PTA (anodized aluminium drum) codes from the separate PTA parts sheet, which also differs on some screws.

Harken code Version Description
S681060043 CCC Drum W46 CCC Ask us to source it →
S687990043 CCC Plain top W46 CCC Ask us to source it →
S688070043 CCC Cover W46 PT CCC Ask us to source it →
A94132100 PTA Base assembly Winch 46 View part →
A94132300 PTA Skirt assembly Winch 46 View part →
S412720053 PTA Drum W46 View part →
S416200053 PTA Plain top W46 Ask us to source it →
S416190053 PTA Cover W46 PT Ask us to source it →

Ordering Spare Parts

Quote the Harken part number from the parts list and the winch serial number, printed on the plate on the drum support. Parts marked * in the PDF (pawls and pawl springs) are supplied in the Harken service kit.

Parts in this Manual We Carry

Harken part numbers as printed in the installation & maintenance manual, matched to the genuine parts in our store.

Harken part no. Our part
A96633300 Winch Spare for Performa Size 46 - Base Assembly
S4152300A7 Winch Spare for Radial Size 35 to 40 - Bushing Igus (22 x 25 x 9.5 mm)
S414890080 Winch Spare for Radial Size 35 to 40 - Bushing Housing (9 x 11 x 7)
S413330085 Winch Spare for Radial Size 46 - Bushing (12 x 14 x 11)
S413020004 Winch Spare for Radial Size 35 to 50 - Gear Z12
S413300004 Winch Spare for Radial Size 46 - Pin (12x60)
S278170002 Winch Spare for Radial Size 46 to 70 - Washer (12.5 x 48 x 1.5)
S413260004 Winch Spare for Radial Size 46 - Gear Z27
S414260004 Winch Spare for Radial Size 46 to 50 - Pawls Carrier (8 x N2)
S000080003 Winch Spare for Radial Size 15 to 70 - Pawl 8 Dia 316SS (B008)
S000380001 Winch Spare for Radial & Performa Size 15 to 80 - Pawl Spring (B038)
S412830041 Winch Spare for Radial Size 35 to 46 - Gear Radial Z23
S413250041 Winch Spare for Radial Size 46 - Pinion - Z13
S413120002 Winch Spare for Radial Size 35 to 70 - Washer (22.5 x 45 x 1)
S413070004 Winch Spare for Radial Size 35 to 50 - Pin
A94133400 Winch Spare for Radial Size 46 - Assy Gear Z12
A94132200 Winch Spare for Radial & Performa Size 46 - Housing Assembly
M0606303 Winch Spare for Radial Size 46 to 70 - Screw (M8x25 UNI 5931)
A74133700 Winch Spare for Radial & Performa Size 35 to 40 - Bearing Cage (75 x 87 x 26)
S413390080 Winch Spare for Radial Size 46 - Spacer
S413880002 Winch Spare for Radial Size 35 to 50 - Center Shaft Washer
S4151400A0 Winch Spare for Radial Size 20 to 46 - Socket Support
S281690097 Winch Spare for Radial Size 40 to 50 - Ring Red Line (B28169)
A94136400 Winch Spare for Radial Size 15 to 80 - Assembly Socket
S415130085 Winch Spare for Radial Size 20 to 35 - Washer Socket
M0614303 Winch Spare for Radial & Performa Size 15 to 80 - Screw (M8x20 UNI 6109)
S415220080 Winch Spare for Radial Size 46 - Socket Washer/Spacer
— Plain Top Winch Radial Size 46 - Chrome All / Two Speed
— Plain Top Winch Radial Size 46 - Bronze All / Two Speed

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual