PARTS LIST

Parts list, screw lengths and screw numbers by car, end control and genoa lead, fitting sheaves and deadends, and care for the T32KIT Control Block Upgrade.

DocumentHarken T32KIT Control Block Upgrade Parts List
FormatPDF · 2 pages · 0.4 MB
LanguageEnglish
T32KIT Control Block Upgrade

Kit Contents

Fits end controls E2730, E3230; genoa leads G27, G27.HL; traveler cars T32. T32 and T32.HL cars with two toggles use T32KIT.HL.

Part no. Pos. Description
H-51009 1 Sideplate (control) 35 mm (4) Ask us to source it →
H-50904 2 Inner race, 35 mm ESP (4) Ask us to source it →
H-50902 3 Sheave assembly 35 mm ESP (4) Ask us to source it →
HFS1219 4 Screw M6 X 30 mm socket buttonhead (8) Ask us to source it →
H-51078 5 Deadend (2) Ask us to source it →
833 6 Blue Loctite adhesive Ask us to source it →

Installation

Screw Series / part no. Configuration Screw length
HFS1219 T32 series cars Sheave 30 mm (1 3/16") Ask us to source it →
HFS366 T32 series cars Deadend 20 mm (shorten HFS1219 or source a 20 mm screw) Ask us to source it →
HFS356 E3240, E3246 end controls Double sheave 50 mm (2"), sold separately Ask us to source it →
HFS356 E2750, E2756, E3250, E3256 end controls Double sheave / deadend (deadend is part of the body) 50 mm (2"), sold separately Ask us to source it →
HFS1220 G273B, G273B.HL genoa leads Single sheave / deadend 35 mm (1 3/8"), sold separately Ask us to source it →
HFS1218 G274B, G274B.HL genoa leads Double sheave 45 mm (1 3/4"), sold separately Ask us to source it →

Fitting

  • To shorten a screw: run a 6 mm nut onto the part you keep, cut, back the nut off to clean the threads and file off burrs.
  • Remove the set screws or deadend, put a drop of blue Loctite in the threaded holes, and mount deadend or sideplate, sheave and inner race, sheaves to the outside.
  • Capture the eye splice on the deadend before installing.

End Controls and Genoa Leads

  • E2730, E3230: 50 mm M6 screws for a stack of two sheaves. Stack no more than two and always include the inner race.
  • G27, G27.HL: 45 mm M6 screws for a stack of two sheaves.
  • Blue Loctite in the threaded holes every time.

Do not stack two blocks on mainsheet traveler cars, and do not stack a deadend on top of a sheave: it weakens the control assembly and the block or deadend can break.

Maintenance

  • Inspect the control line often for deterioration and replace as needed; check the blocks for wear.
  • Flush cars often with fresh water; periodically squirt a detergent/water solution into the centre openings, roll back and forth and flush.
  • No spray lubricants: the balls skid instead of rolling. 1–2 drops of McLube OneDrop (or light machine oil) on the track ball surfaces; wipe off the excess.
  • Clean the track with detergent and water; keep teak cleaners and caustics off.

Parts in this Parts List We Carry

Harken part numbers as printed in the parts list, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual