INSTALLATION & MAINTENANCE MANUAL

Fit, fasteners, line range and assembly for the 475 Micro and 298 wire fairlead cam kits.

DocumentHarken Wire Fairlead Cam Kits Installation & Maintenance Manual
FormatPDF · 2 pages · 0.2 MB
LanguageEnglish
Wire Fairlead Cam Kits

Cams and Fasteners

Part no. Cam Fasteners Spacing Min line Max line
150 Cam-Matic 5 mm (#10) FH 38 mm (1 1/2") 3 mm (1/8") 12 mm (1/2") View part →
468 Micro Cam-Matic 4 mm (#8) TH 27 mm (11/16") 2 mm (3/32") 6 mm (1/4") View part →
365 Carbo-Cam 5 mm (#10) FH 38 mm (1 1/2") 3 mm (1/8") 10 mm (3/8") View part →
471 Micro Carbo-Cam 4 mm (#8) TH 27 mm (11/16") 3 mm (1/8") 6 mm (1/4") View part →

FH = flathead, TH = trusshead. The wire fairlead sits ahead of the cam and holds the line at the cleat when not in use.

475 Micro (468 / 471 cams)

  • Place the wire fairlead in the base with the channel facing down.
  • Remove the thin red cam base from the cleat.
  • Set the cleat on the fairlead base and mount it per the cam instructions.

298 (150 / 365 cams)

  • Place the wire fairlead in its base with the channel and bevelled bosses facing up.
  • Sandwich the fairlead legs between the fairlead base and the cleat.
  • The thin red plastic cam base stays on the cleat.
  • Set the cleat on the fairlead base and mount it per the cam instructions.

Flush frequently with fresh water; keep teak cleaners and caustics off.

Parts in this Manual We Carry

Harken part numbers as printed in the installation & maintenance manual, matched to the genuine parts in our store.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual