We Ship Worldwide! Shipping information.
DIMENSION DRAWING

Karver KFC classic V3 furlers from KFC1.5 to KFC12.0: working and breaking loads, mass, drum size and part code for every size.

DocumentKarver KFC Furlers (Classic Version) Dimension Drawings
FormatPDF · 1 page · 0.6 MB
LanguageEnglish
Download PDF ▾
Dimension DrawingPDF · 1 p.KFC3.0 furlerPDF · 1 p.KFC4.5 furlerPDF · 1 p.KFC6.0 furlerPDF · 1 p.KFC8.0 furlerPDF · 1 p.KFC10.0 furlerPDF · 1 p.KFC12.0 furlerPDF · 1 p.
View Collection
SpecificationsFeaturesReading the PlansProducts
Karver KFC Furlers (Classic Version) — Dimension Drawings

KFC Furler Specifications

Model Part code (as printed) Max Working Load Breaking Load Mass (title block) Drum (mm)
KFC1.5 PF 300 150 [C] 1.5 T 3 T 812.61 g 118.8
KFC3.0 PF 300 300 [C] 3 T 6 T 1447.466 g 159
KFC4.5 PF 300 450 [C] 4.5 T 9 T 2517.14 g 194.8
KFC6.0 PF 300 600 [C] 6 T 12 T 2938.21 g 220.8
KFC8.0 PF 300 800 [C] 8 T 16 T 3617.541 g 220.83
KFC10.0 PF 300 1000 [C] 8 T (as printed) 16 T (as printed) 4048.682 g 220.83
KFC12.0 PF 300 1200 [C] 12 T 24 T 4120.28 g 220.8

The KFC10.0 plan prints the same loads as the KFC8.0 (8 T / 16 T); the standard KF10.0 plan prints 10 T / 17 T. Check with us before relying on the KFC10.0 figures.

What the Plans Show

  • KFC1.5 to KFC10.0 (classic version): carbon wheel with wood cover, stainless steel body on swivel and drum, silicone protection and fast pin.
  • KFC1.5 to KFC6.0: K Snap at the drum; KFC1.5 shows a lashing eye, KFC6.0 to KFC10.0 lashing endings (the KFC10.0 plan notes 362 g and 426 g lashing endings included).
  • KFC12.0: carbon wheel, silicone protection, fast pin mechanism and lashing eyes top and bottom.

How to Read the Plans

  • Each download is a one-page Karver technical plan for one size, with the title block repeated in French and English.
  • All dimensions are in millimetres. Read sizes from the dimension figures only: the drawing scale printed in the title block applies to the original sheet, not to a screen or a scaled printout.
  • The title block gives the designation, the Maximum Working Load (Charge de travail), the Breaking Load (Charge de rupture), the mass (Masse) and the Karver part code (Type + Famille + Code, with the version letter in brackets where there is one).
  • When ordering a spare or a complete unit, quote the full part code including the letter in brackets: it identifies the version.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual