OWNER'S MANUAL

Installation, wiring, operation and servicing for the V700, plus the full exploded parts list with every service kit by Lewmar part number.

DocumentLewmar ref. 65001022, Issue 8
FormatPDF · 20 pages · 2.3 MB
LanguageEnglish
Lewmar V700 windlass

Specifications

Supply Motor Max pull Working load limit Max line speed Typical line speed Current draw Breaker Weight
12 V 320 W 320 kg / 700 lb 79 kg / 175 lb 25 m/min · 82 ft/min 15 m/min · 50 ft/min 45 A 35 A 6.5 kg / 14 lb

Gypsy & Rode Compatibility

Gypsy kit 68001024 takes 6–7 mm / 1/4" chain spliced to 12 mm (1/2") 3-strand or 8-plait rope.

Chain D (mm) P (mm) W (mm)
6 mm DIN 766 6 18.5 20.4
6 mm ISO 4565 6 18 21.6
7 mm DIN 766 7 22 23.8
1/4" ACCO ISO G43 (G4) 7 21.3 24.4
1/4" ACCO BBB (3B) 7.14 22.1 25.2

Shop the V700 Dual Gypsy (68001024) →

Cable Sizing

Size by total run: battery → windlass → battery. Don't confuse cable run with boat length.

Total cable run Cable size
0–10 m (0–33 ft) 10 mm² · 8 AWG
11–18 m (34–60 ft) 16 mm² · 6 AWG
19–24 m (61–80 ft) 25 mm² · 4 AWG

Mounting

  • Standard 8 mm (5/16") studs suit deck + packing up to 76 mm (3").
  • Thin, foam or balsa-cored decks need reinforcement to spread the load.
  • Lead the rode horizontally from the bow roller onto the top of the gypsy, on its centerline.
  • Leave enough vertical fall into the locker, even when it's full.

Servicing Schedule

Regularly

  • Wash down with fresh water.
  • Check electrical connections for corrosion; clean and lightly grease.
  • Keep the anchor locker drain clear so no water reaches the motor/gearbox.
  • Inspect the gypsy (high-wear item); smear grease on the cone contact surfaces on reassembly.
  • Re-check mounting studs after the first few recoveries.

Annually

  • Inspect electric cables; repair or renew.
  • Strip above-deck components, clean and lightly grease.
  • Check motor/gearbox for corrosion; repaint with marine oil-based enamel.
  • Remove the motor cover and blow dust off the brushes.

Never leave the fall-safe pawl carrying the rode at anchor. Take the load on a chain stopper, cleat or samson post.

V700 Spare Parts & Service Kits

Official kit list from section 9 of the manual. Match the Lewmar part number and order the genuine kit.

Lewmar kit no. Description Items (manual ref.)
66000099 Clutch Lever Clutch lever (1) View part →
66000600 Control Arm Kit 12, 24, 30 View part →
66000601 Gypsy Cap Kit 21, 31 View part →
66000602 Mounting Kit 5/16" (USA) 18, 26a, 33, 38 Ask us to source it →
66000603 Gypsy RC 1/4" G4 & 7 mm Kit 37a, 40 Ask us to source it →
66000604 Gypsy RC 6 mm DIN 766 Kit 37b, 40 View part →
66000605 Mounting Kit Metric 18, 26b, 33, 38 View part →
66000606 Chain Pipe Cover 29, 40 (×2) View part →
66000607 Fall Safe Kit 6, 32, 34, 35, 36 View part →
66000608 Bearing / Seal Kit 3, 4, 5, 7, 13 (×2), 16, 17, 19 View part →
66000609 Driveshaft Kit 1 (×3), 8, 11, 16, 20, 21 View part →
66000610 Motor Kit 6 (×3), 9 (×2), 16, 25, 27 View part →
66000611 Gearcase Complete 2 (×3), 3, 13, 14, 16, 17, 23, 41 (×3) View part →
66000612 Gear Set 1 (×3), 8, 10, 15, 16, 22 View part →
66000613 Compound Gear Assy. 22 View part →
66000614 1st Compound Gear 15 View part →
66000615 Magnet & Sensor Kit 39 View part →

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual