Lofrans CETO Capstan — Drill Template

What the Template Shows

• Lofrans drawing "Deck Template", product family CETO, A3 sheet, scale 1:1 (new emission dated 13/05/2020).
• Solid line: cut-out line. Dashed line: overall dimension (the footprint of the capstan on deck).
• Central hatched cut-out dimensioned 60 mm.
• Four fixing holes, Ø9 mm (Nr. 4 holes), set around the cut-out; the 90 mm dimension is taken across the hole circle.

Using the Template

1. Print the PDF on A3 at 100% (actual size, no "fit to page").
2. Measure the printed 60 mm and 90 mm dimensions with a ruler before you cut; if they do not match, the print is not to scale.
3. Check the dashed overall outline clears deck fittings, toe rail and the area under deck before you commit.
4. Tape it down, mark the cut-out and the four Ø9 mm holes, then drill and cut.

The sheet carries no installation instructions: follow the capstan's installation manual for sealing and fixing.