Lofrans Explorer — Exploded View & Parts List
PARTS LIST
Exploded view and full parts list (drawing B.35.101 Rev. C, 03-2007) for the retired Explorer windlass, standard and low-profile versions, with the service kit for each wear part.
DocumentLofrans Explorer Exploded View & Parts List
FormatPDF · 2 pages · 0.2 MB
LanguageEnglish
About This Drawing
- Explorer windlass, retired: drawing B.35.101 Rev. C, dated 03-2007. The title block carries the Master Winch logo (as printed).
- Two builds on one drawing: standard (drum 1029 on main shaft 985) and low profile (gipsy cap 999a on LP main shaft 986).
- Motor: 1600 W, in 12 V (1028a) or 24 V (1028b).
- Gipsies 989a–d: 8 mm ISO up to 12 mm ISO / 13 DIN 766 chain.
- Chain counter parts: magnet 964 and sensor 965 (Kit S).
Item numbers are drawing references, not order codes. Quote the drawing code, item number, motor voltage and gipsy size when you ask for a part.
Exploded View & Parts List
Service Kits
| Kit code | Description | |
|---|---|---|
| KA32101 | Kit A – Seals | Ask us to source it → |
| KB32101 | Kit B – Screws & nuts | Ask us to source it → |
| KC06101 | Kit C – Keys | Ask us to source it → |
| KD06101 | Kit D – Circlips | Ask us to source it → |
| KF32101 | Kit F – Finger | Ask us to source it → |
| KS36101 | Kit S – Sensor & magnet | Ask us to source it → |
Kit codes as printed: the key and circlip kits carry 06101 numbers, the others 32101 or 36101.
Parts
| Item | Description | Kit |
|---|---|---|
| 203 | Seal – 35×45×7 | Kit A |
| 226 | Washer for screw M8 | Kit B |
| 227 | Nut – M8 | Kit B |
| 253 | Bearing – 6006 | – |
| 260 | Spring washer for screw M8 | Kit B |
| 293 | Hd cap screw – M5×16 | Kit F |
| 350 | Round key – 4×6,5 | Kit C |
| 417 | Hex hd screw – M8×30 | Kit B |
| 450 | Key – 8×7×80 | Kit C |
| 524 | Seal – 30×55×10 | Kit A |
| 525 | Circlip – 55 DIN 472 | Kit D |
| 526 | Circlip – 30 DIN 471 | Kit D |
| 619 | Hd cap screw – M6×10 | Kit B |
| 639 | Washer for screw M8 | Kit B |
| 842 | Handle | – |
| 906 | Spacer | Kit F |
| 907 | Hd cap screw – M6×50 | Kit B |
| 909 | Spring | Kit F |
| 945 | Cap | Kit F |
| 956 | Clutch nut | – |
| 964 | Magnet | Kit S |
| 965 | Sensor | Kit S |
| 980b | Base | – |
| 981 | Support | – |
| 982 | Stripper | – |
| 983b | Cover | – |
| 984 | Hd cap screw – M8×50 | Kit B |
| 985 | Std main shaft | – |
| 986 | LP main shaft | – |
| 988 | Clutch cone | – |
| 989a | Gipsy ∅8 ISO | – |
| 989b | Gipsy ∅10 ISO – ∅3/8" G40 | – |
| 989c | Gipsy ∅10 DIN 766 | – |
| 989d | Gipsy ∅12 ISO – ∅13 DIN 766 | – |
| 990 | Spacer | – |
| 992 | Gasket | – |
| 998 | Finger | Kit F |
| 999a | Gipsy cap | – |
| 1008 | Pivot 8×14 | Kit F |
| 1025 | Cap | – |
| 1027 | Gearbox | – |
| 1028a | Electric motor 1600 W 12 V | – |
| 1028b | Electric motor 1600 W 24 V | – |
| 1029 | Drum | – |
| 1033 | Stud – M8×105 | – |
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
