We Ship Worldwide! Shipping information.
DIMENSION DRAWING

Maxwell's dimension drawings for every MAXCLAW stainless anchor from 5 to 40 kg in one table: length, width, height, fluke and shackle slot – so you can check the anchor will stow on your bow roller before you order.

DocumentMaxwell MAXCLAW Anchor Dimension Drawings
FormatPDF · 1 page · 0.1 MB
LanguageEnglish
Download PDF ▾
Dimension DrawingPDF · 1 p.MAXCLAW 7.5 kgPDF · 1 p.MAXCLAW 10 kgPDF · 1 p.MAXCLAW 15 kgPDF · 1 p.MAXCLAW 20 kgPDF · 1 p.MAXCLAW 30 kgPDF · 1 p.MAXCLAW 40 kgPDF · 1 p.
View Collection
DimensionsProducts
Maxwell MAXCLAW Anchor — Dimension Drawings

MAXCLAW Dimensions (mm)

Size Drawing No. Overall length Width Height at crown Shank to fluke tip Fluke (side view) Shank slot Hole Ø
5 kg P105060 470 310 180 180 250 28 × 9 7
7.5 kg P105061 540 345 200 205 290 32.5 × 10 8
10 kg P105062 600 390 220 223 315 35.8 × 11 9
15 kg P105063 680 400 255 250 360 41 × 12 9
20 kg P105064 750 520 280 280 375 45 × 13 11
30 kg P105065 855 590 320 315 430 52 × 16 12
40 kg P105066 930 620 370 375 460 56 × 16 13.5
  • All dimensions in millimetres; material stainless steel (all sizes).
  • Height at crown: top of the shank to the bottom of the crown. Shank to fluke tip: underside of the shank down to the fluke tip.
  • Shank slot is length × width; the hole is the small hole at the crown end of the shank.

Each size has its own drawing in the downloads below.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual