We Ship Worldwide! Shipping information.
DIMENSION DRAWING

Maxwell's dimension drawings for the MAXSET anchor from 6 to 40 kg in one table – length, width, height, fluke and shank – for both the hot dip galvanised and the mirror polished stainless versions.

DocumentMaxwell MAXSET Anchor Dimension Drawings
FormatPDF · 1 page · 0.1 MB
LanguageEnglish
Download PDF ▾
Dimension DrawingPDF · 1 p.MAXSET 10 kgPDF · 1 p.MAXSET 16 kgPDF · 1 p.MAXSET 20 kgPDF · 1 p.MAXSET 25 kgPDF · 1 p.MAXSET 30 kgPDF · 1 p.MAXSET 40 kgPDF · 1 p.
View Collection
DimensionsProducts
Maxwell MAXSET Anchor — Dimension Drawings

MAXSET Dimensions (mm)

Size Drawing No. Overall length Width Height Shank end to fluke tip (horizontal) Fluke (side view) Fluke tip to shank Shank slot Shank thickness Hole
6 kg P105000 612 283 258 251 209 189 35 × 15 10 Ø10
10 kg P105001 703 323 295 288.0 240 217 25.0 × 18.0 (as printed) 12.0 Ø12.0
16 kg P105002 818 367 342 344 269 248 50 × 20 12 Ø14
20 kg P105003 887 411 374 364 302 273 54 × 20 16 Ø16
25 kg P105004 981 443 411 417 322 298 60 × 25 16 Ø16
30 kg P105005 1049 464 437 455 336 316 65 × 25 16 StSt / 20 HDG Ø16
40 kg P105006 1122 508 470 470 374 343 69 × 25 20 Ø16
  • All dimensions in millimetres. One drawing covers both finishes: hot dip galvanised (HDG) for the galvanised version, mirror polish for the stainless (S/S) version.
  • Shank slot is length × width at the end of the shank; the hole is in the shank near the crown.
  • The 30 kg shank is 16mm in stainless and 20mm in HDG.

The 10 kg slot (25.0 × 18.0) is shorter than the 6 kg slot (35 × 15) on Maxwell's drawings (as printed). Each size has its own drawing in the downloads below.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual