Maxwell MAXset Bow Roller 4–6 kg — Parts & Dimensions
PARTS LIST
Parts list and fitting dimensions for the Maxwell MAXset bow roller 4–6 kg (P105074 bead blast / P105075 mirror polish), including where the roller and securing pin go for a 4 kg or a 6 kg anchor.
DocumentMaxwell MAXset Bow Roller 4–6 kg Parts & Dimensions
FormatPDF · 1 page · 0.4 MB
LanguageEnglish
Download PDF ▾
Assemblies
| Assy No. | Description |
|---|---|
| P105074 | MAXset Bow Roller 4~6kg – bead blast then electro polish finish |
| P105075 | MAXset Bow Roller 4~6kg – mirror polish finish |
Fitting Dimensions
| Dimension | Value |
|---|---|
| Overall length | 465mm (18.31in) |
| Recommended minimum support | 260mm (10.24in) |
| Width (top view) | 68mm (2.68in) |
| Mounting holes | Ø9mm (0.33in), 4 holes |
| Hole spacing – athwartships | 38mm (1.50in) |
| Hole spacing – fore and aft | 140mm (5.51in) |
| Aft end to first holes | 25mm (0.98in) |
| Anchor-stowed dimension (side view) | With 6 kg anchor | With 4 kg anchor |
|---|---|---|
| Horizontal | 315mm (12.38in) | 315mm (12.38in) |
| Horizontal | 272mm (10.71in) | 294mm (11.58in) |
| Vertical | 138mm (5.44in) | 125mm (4.91in) |
| Vertical | 115mm (4.54in) | 99mm (3.88in) |
- The middle roller and the securing pin each have a 6 kg and a 4 kg position: fit them in the holes marked on the drawing for your anchor (sheet 1 of 2 for 6 kg, sheet 2 of 2 for 4 kg).
- The roller must be supported for at least 260mm.
Parts List
| Part No. | Item | Description | |
|---|---|---|---|
| SP4494 | 1 | Plastic roller 53.5 OD × 57L black, bow roller (2 per roller) | Ask us to source it → |
| SP0424 | 2 | Washer flat M12 (4 per roller) | Ask us to source it → |
| SP0195 | 3 | Button head screw M8×20 (4 per roller) | Ask us to source it → |
| SP0554 | 4 | Quick release pin 3/8" × 3.7" long | Ask us to source it → |
| P105074B | 5 | MAXset bow roller base 4~6kg | Ask us to source it → |
| 7938 | 6 | Roll shaft, MAXset bow roller 4~6kg (2 per roller) | Ask us to source it → |
| 7895 | 7 | Backing plate, MAXset bow roller 10~20kg – optional | View part → |
Maxwell notes the 7895 bottom plate is an option and is excluded from P105074 and P105075.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
