We Ship Worldwide! | FREE SHIPPING! for US Continental orders over $145. Click for details.
DECK TEMPLATE

Muir deck template for the HR 4000/4200 Thor horizontal windlass, twin gypsy layout: housing bolt holes, chain pipe cut-outs and the wiring and hydraulic line cut-outs.

DocumentMuir Thor HR4000/HR4200 Windlass Deck Template
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Download PDFBuy
TemplateDimensionsProducts
Muir Thor HR4000/HR4200 Windlass — Deck Template

Deck Template

  • Drawing THOR DT, "HR 4000/4200 Thor deck template – twin gypsy", A3 sheet, drawn 3-03-2011; revision 1 (13-03-12, ECR #857 base hole dimensions).
  • The drawing is at scale 1:2, not full size. Printed at 100% on A3 it is half size, so use the printed dimensions to mark out the deck.
  • All dimensions in mm. Bow is to the left on the drawing.
  • Chain pipe position varies according to chain size.

Key Dimensions (as printed)

Feature Dimension
Housing bolt holes 4 holes Ø3/4"
Housing holes, fore and aft centres 473
Housing holes, athwartships centres 267
Chain pipe holes (one per gypsy) Ø60
Chain pipe centre from forward housing-hole line 170
Chain pipe centre inboard of housing-hole line 45
Chain pipe fixing holes Ø1/4", 36.5 either side of the chain pipe centre (73 apart)
Chain pipe fixing holes from forward housing-hole line 207
Cut-out for wiring / cut-out for hydraulic lines Dimensioned on the drawing (100, 50, 125, 110, 90, 87)
Tolerances unless specified X ±0.5, X.X ±0.1, X.XX ±0.025

Check every dimension on the actual windlass and your chain size before cutting the deck.

This document covers the Muir models named above, as printed in the PDF. The Muir windlasses we stock today are listed below; motor ratings and parts can differ between generations, so check the model plate and ask us before ordering spares.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual