We Ship Worldwide! Shipping information.
INSTRUCTIONS

Quick Kai XP LED down light technical sheets (FP OD, FP SD, HP and LP, 4W and 6W): cut-out and recess, power and current draw, light output and how to mount and wire each version.

DocumentQuick Kai XP LED Down Lights Technical Sheets
FormatPDF · 4 pages · 0.2 MB
LanguageEnglish
Download PDF ▾
InstructionsPDF · 4 p.Kai XP FP OD 6WPDF · 4 p.Kai XP FP SD 4WPDF · 4 p.Kai XP FP SD 6WPDF · 4 p.Kai XP HP 4WPDF · 4 p.Kai XP HP 6WPDF · 4 p.Kai XP LP 4WPDF · 4 p.Kai XP LP 6WPDF · 4 p.
View Collection
SpecificationsLight OutputInstallationWiringProducts
Quick Kai XP LED Down Lights — Technical Sheets

Range at a Glance

Model Power Supply Current Bezel size Mounting hole Recess IP Fixing Installation
KAI XP FP OD 4W 4 W 9-32 Vdc 0,33A@12V / 0,17A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling
KAI XP FP OD 6W 6 W 9-32 Vdc 0,5A@12V / 0,25A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling
KAI XP FP SD 4W 4 W 9-32 Vdc 0,33A@12V / 0,17A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling
KAI XP FP SD 6W 6 W 9-32 Vdc 0,5A@12V / 0,25A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling
KAI XP HP 4W 4 W 10-30 Vdc 0,33A@12V - 0,17A@24V Ø 82 mm Ø 65 mm 28 mm IP66 Screws Ceiling-wall
KAI XP HP 6W 6 W 10-30 Vdc 0,5A@12V / 0,25A@24V Ø 82 mm Ø 65 mm 28 mm IP66 Screws Ceiling-wall
KAI XP LP 4W 4 W 10-30 Vdc 0,33A@12V - 0,17A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling-wall
KAI XP LP 6W 6 W 10-30 Vdc / neg. common 0,5A@12V / 0,25A@24V Ø 82 mm Ø 65 mm 30 mm IP66 Springs Ceiling
  • All versions weigh 150 g. Bezel AISI 316L stainless steel (FP) or AISI 316 (HP, LP); polycarbonate diffuser, aluminium heat sink.
  • Bezel finishes: polished / white / satin / black (FP); polished / white 9010 / satin (HP 6W, LP 6W).
  • Dimmable (PWM). Recommended dimmer on the sheets: FASP094CA2A3D00 HDIM300 D00 (LP 6W sheet: FASP094CA2A3A00 HDIM300).
  • FP versions are bicolor with 0,3 W secondary light power; available light colours listed: warm white, day light, blue, red.

Photometric Data

Model Light source Light type Warm white (2900–3100 K) Day light (3800–4100 K) Beam angle
KAI XP FP OD 4W 1 power LED Bicolor 288 lm 320 lm 100°
KAI XP FP OD 6W 1 power LED Bicolor 368 lm 395 lm 100°
KAI XP FP SD 4W 1 power LED Bicolor 362 lm 400 lm 100°
KAI XP FP SD 6W 1 power LED Bicolor 460 lm 500 lm 100°
KAI XP HP 4W 2 power LED – 245 lm 340 lm 60°
KAI XP HP 6W 2 power LED One color 330 lm 465 lm 65°
KAI XP LP 4W 2 power LED – 245 lm 340 lm 70°
KAI XP LP 6W 2 power LED One color 315 lm 410 lm 70°

Luminous flux as printed on each sheet. Cool white (5500–6500 K) is listed as a colour temperature column with no published flux.

Spring Mounted (FP, LP)

  1. Cut the hole to the size in the table (Ø 65 mm).
  2. Bring the wires from the power supply to the panel or ceiling.
  3. Connect: red is positive, black is negative.
  4. Position the springs as shown on the sheet so the light enters the hole.
  5. Push the light body into the hole, turning it to the desired position.

Screw Mounted (HP)

  1. Bring the power supply wires (at the voltage in the chart) to the panel.
  2. Cut the hole to the recommended size.
  3. Fit the gasket before connecting.
  4. The wires come with male fast-on connectors; cut them off if your installation does not need them. Red positive, black negative; test the light.
  5. Fix the light to the panel with self-tapping screws.
  6. Press the frame onto the light.

Wiring

  • Use the unit in ultra-low voltage (SELV) with a LED power supply with constant voltage output.
  • Do not plug the unit directly into the wall socket (AC).
  • More than one unit: connect in parallel on a constant-voltage LED power supply.
  • Positive is the red wire, negative is the black wire.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual