INSTRUCTIONS

Quick LED spot and down light technical sheets – Chiara, Ely, Erica, JD, JO, Nikita, Regina and Sonia: cut-out, recess depth, current draw, beam angle, output and how to fit them.

Quick Chiara, Ely, Erica, JD, JO, Nikita, Regina & Sonia LED Down Lights — Technical Sheets

Range at a Glance

Model Power Supply Current Size Mounting hole Recess IP Fixing Installation
Chiara 4W 4 W 9-32 Vdc 0,34A@12V / 0,17A@24V Ø 87 mm Ø 65 mm 28 mm IP66 Screws Ceiling
Chiara 6W 6W 9-32 Vdc 0,5A@12V / 0,25A@24V Ø 88 mm Ø 65 mm 41 mm IP66 Screws Ceiling-wall
Ely 1,5W 15° 1,5 W 9-32 Vdc 0,12A@12V / 0,06A@24V Ø 39,5 mm Ø 30 mm 26.8 mm IP65 Recessed/surface Ceiling-wall
Ely 1,5W 40° 1,5 W 9-32 Vdc 0,12A@12V / 0,06A@24V Ø 39,5 mm Ø 30 mm 26.8 mm IP65 Recessed/surface Ceiling-wall
Ely 3W 15° 3 W 9-32 Vdc 0,25A@12V / 0,12A@24V Ø 39,5 mm Ø 30 mm 34.3 mm IP65 Recessed/surface Ceiling-wall
Ely 3W 40° 3 W 9-32 Vdc 0,25A@12V / 0,12A@24V Ø 39,5 mm Ø 30 mm 34.3 mm IP65 Recessed/surface Ceiling-wall
Erica 1 2 W 9-32 Vdc 0,17A@12V/0,08A@24V 50 x 50 mm Ø 40 mm 35 mm IP65 Springs Ceiling-wall
Erica 2 4 W 9-32 Vdc 0,33A@12V/0,17A@24V 100 x 50 mm Ø 40 mm 35 mm IP65 Springs Ceiling-wall
Erica 3 6 W 9-32 Vdc 0,5A@12V/0,25A@24V 150 x 50 mm Ø 40 mm 35 mm IP65 Springs Ceiling-wall
JD 1,5W 1,5 W 9-32 Vdc 0,12A@12V/0,06A@24V 36 x 36 mm Ø 25 mm 19 mm IP65 Screws Ceiling-wall
JO 1.5W 1,5 W 9-32 Vdc 0,12A@12V/0,06A@24V Ø 42 mm Ø 25 mm 19 mm IP65 Screws Ceiling-wall
Nikita 4W 4 W 9-32 Vdc 0,33A@12V / 0,17A@24V Ø 85 mm Ø 70 mm 42 mm IP40 Springs Ceiling
Nikita 6W 6W 9-32V 0,50@12V / 0,25@24V Ø 85 mm Ø 70 mm 55.2 mm IP40 Springs Ceiling
Nikita 9W 9W 9–32V 0,75A@12V / 0,38@24V Ø 85 mm Ø 70 mm 74.5 IP40 Springs Ceiling
Regina 4W 4 W 9-32V 0,33A@12V / 0,17A@24V 85 x 85 mm Ø 70 mm 42 mm IP40 Springs Ceiling
Regina 6W 6 W 9-32V 0,5A@12V / 0,25A@24V 85 x 85 mm Ø 70 mm 55.2 mm IP40 Springs Ceiling
Regina 9W 9 W 9-32 Vdc 0,75A@12V / 0,38A@24V 85 x 85 mm Ø 70 mm 74.5 IP40 Springs Ceiling
Sonia 4W 4 W 9-32 Vdc 0,34A@12V / 0,17A@24V Ø 105 mm Ø 79 mm 34 mm IP66 Screws Ceiling
Sonia 9W 9W 9-32 Vdc 0,75@12V / 0,38@24V Ø 105 mm Ø 79 mm 57.5 mm IP66 Screws Ceiling
  • Bezels AISI 316 / 316L stainless steel; finishes on most sheets polished / satin / white (9010) / gold PVD / black (PVD).
  • Nikita and Regina are orientable. Chiara, Nikita, Regina and Sonia are bicolor with 0,3 W secondary light power.
  • All are dimmable; recommended dimmer on the sheets: FASP094CA2A3D00 HDIM300 D00. (The Nikita 6W sheet prints FASP01000003D00 PSCV 30W - 24V D in this field.)

Photometric Data

Model Light source Light type Warm white (2900–3100 K) Day light (3800–4100 K) Beam angle
Chiara 4W 1 power LED Bicolor 350 lm 390 lm 35°
Chiara 6W 1 high luminosity LED Bicolor 465 lm 505 lm 35°
Ely 1,5W 15° 1 LED One color 105 lm 115 lm 15°
Ely 1,5W 40° 1 LED One color 95 lm 112 lm 40°
Ely 3W 15° 1 power LED One color 170 lm 185 lm 15°
Ely 3W 40° 1 power LED One color 150 lm 176 lm 40°
Erica 1 1 power LED One color 134 lm 144 lm 45°
Erica 2 2 power LED One color 268 lm 289 lm 45°
Erica 3 3 power LED One color 403 lm 433 lm 45°
JD 1,5W 1 power LED One color 121 lm 133 lm 15°
JO 1.5W 1 power LED One color 121 lm 133 lm 15°
Nikita 4W 1 high luminosity LED Bicolor 330 lm 390 lm 35°
Nikita 6W 1 high luminosity LED Bicolor 455 lm 480 lm 35°
Nikita 9W 1 high luminosity LED Bicolor 515 lm 620 lm 35°
Regina 4W 1 power LED Bicolor 330 lm 390 lm 35°
Regina 6W 1 power LED Bicolor 455 lm 480 lm 35°
Regina 9W 1 power LED Bicolor 515 lm 620 lm 35°
Sonia 4W 1 high luminosity LED Bicolor 315 lm 375 lm 40°
Sonia 9W 1 high luminosity LED Bicolor 612 lm 732 lm 40°

Luminous flux and beam angle as printed on each sheet.

Spring Mounted (Erica, Nikita, Regina)

  1. Cut the hole to the size in the table.
  2. Bring the wires from the power supply to the panel or ceiling.
  3. Connect: red is positive, black is negative.
  4. Position the springs as shown on the sheet so the light enters the hole.
  5. Push the light body in, turning it to the desired position.

Screw Mounted (Chiara 4W)

  1. Bring the power supply wires (at the voltage in the chart) to the panel.
  2. Cut the hole to the recommended size.
  3. Fit the gasket before connecting.
  4. The wires come with male fast-on connectors; cut them off if your installation does not need them. Red positive, black negative; test the light.
  5. Fix the light to the panel with self-tapping screws.
  6. Press the frame onto the light.

Chiara 6W and Sonia show their mounting as a drawing on the sheet. The Ely, JD and JO sheets refer to the product installation and connection manual.

Wiring

  • Use the unit in ultra-low voltage (SELV) with a constant-voltage LED power supply. Do not connect directly to the mains (AC).
  • More than one light: connect them in parallel. The power supply must deliver a wattage equal to or higher than the total of the lights connected.
  • Positive is the red wire, negative is the black wire.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual