We Ship Worldwide! Shipping information.
INSTRUCTIONS

Quick LED reading light technical sheets – Audrey, Audrey Wall USB, Califfa, Jacob and Shark 30 / 50: power draw, output, wire hole and how to mount them.

DocumentQuick Audrey, Califfa, Jacob & Shark LED Reading Lights Technical Sheets
FormatPDF · 4 pages · 0.3 MB
LanguageEnglish
Download PDF ▾
InstructionsPDF · 4 p.Audrey Wall USBPDF · 4 p.CaliffaPDF · 4 p.JacobPDF · 4 p.Shark 30 / 50PDF · 4 p.
View Collection
SpecificationsInstallationMaintenanceProducts
Quick Audrey, Califfa, Jacob & Shark LED Reading Lights — Technical Sheets

Range at a Glance

Model Power Supply Current Wire hole Weight IP Installation Switch Flexible
Audrey RD 1,5 W 9-32 Vdc 0.12A@12V / 0.06A@24V Ø 8 mm 285 gr IP40 Table Yes Yes
Audrey Wall USB 1.5 W + USB 7,5W max 9-32 Vdc 0.75A@12V / 0.38A@24V (max) Ø 10 mm 285 gr IP40 Wall Yes Yes
Califfa RD 1.5 W 9-32 Vdc 0,12A @ 12V / 0,06A @24V Ø 8 mm 550 gr IP40 Table Yes Yes
Jacob 2.5 W 9-32 Vdc 0.21 A @12V / 0.11 A@24V Ø 8 mm 190 gr IP40 Wall Yes No (orientable)
Shark 30 / 50 1.5 W 9-32 Vdc 0,13@12V / 0.06A@24V Ø 8 mm 190 gr IP40 Wall No Yes
Model Light source Light type Warm white Day light
Audrey RD / Audrey Wall USB 1 high luminosity LED One color 75 lm 100 lm
Califfa RD Power LED Bicolor (0,15 W secondary) – 110 lm
Jacob 10 high luminosity LED One color 140 lm 160 lm
Shark 30 / 50 1+1 red power LED Bicolor (0,5 W secondary) – –
  • All constant voltage, not dimmable, screw-fixed.
  • Audrey: aluminium base and head, bracket covering in leather / silicone / neoprene. Shark: plastic base and head, brass bracket.

Installation & Wiring

  1. Drill a hole in the panel for the power wires to pass through the central hole in the base of the light (Jacob: Ø 8 mm).
  2. Connect: positive to red, negative to black, and test the light.
  3. Lay the reading light on the surface over the wire hole.
  4. Fix the base with self-tapping screws.
  5. Press the frame onto the product.

These are the steps printed on the Audrey, Califfa and Jacob sheets; the Shark sheet shows its mounting as a drawing only.

  • Use the unit in ultra-low voltage (SELV) with a constant-voltage LED power supply. Do not connect directly to the mains (AC).
  • More than one light: connect them in parallel. The power supply must deliver a wattage equal to or higher than the total of the lights connected.
  • Positive is the red wire, negative is the black wire.

Maintenance

  • Clean with a soft damp cloth. Do not use chlorine-based sanitisers or degreasers; rinse with plenty of fresh water afterwards.
  • The LED lamps are built in and cannot be replaced.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual