Quick QB Fixed, Spin, Swivel, Tower & Twins LED Lights (PDF)

INSTRUCTIONS

Quick QB LED wall light technical sheets – Fixed, Spin, Swivel, Tower and Twins – plus the TB316 Tower 2L installation sheet: power draw, size, output and wiring.

DocumentQuick QB Fixed, Spin, Swivel, Tower & Twins LED Lights Technical Sheets

FormatPDF · 4 pages · 0.2 MB

LanguageEnglish

Download PDF ▾

View Collection

Specifications Light Output Installation Wiring Products

Quick QB Fixed, Spin, Swivel, Tower & Twins LED Lights — Technical Sheets

Range at a Glance

Model	Power	Supply	Current	Dimensions	Weight	Orientable
QB Fixed 1L 6W	6 W	9-32 Vdc	0,5A@12V / 0,25@24V	65 x 65 x 80 mm	640 gr	No
QB Spin 1L 4W	4 W	9-32 Vdc	0,34A@12V / 0,17A@24V	65 x 90 x 91mm	700 gr	Yes – 350°
QB Spin 2L 2+2W	2 W + 2 W	9-32 Vdc	0,33A@12V / 0,17A@24V	65 x 90 x 91mm	510 gr	Yes – 350°
QB Swivel 1L 4W	4 W	9-32 Vdc	0,34A@12V / 0,17A@24V	–	705 gr	Yes – 350°
QB Swivel 1L 6W	6 W	9-32 Vdc	0,5A@12V / 0,25A@24V	–	705 gr	Yes – 350°
QB Tower 2L 4+4W	4 W + 4 W	9-32 Vdc	0,66A@12V / 0,34A@24V	65 x 65 x 130mm	1305 gr	No
QB Tower 2L 6+6W	6 W + 6 W	9-32 Vdc	1A@12V / 0,5A@24V	65 x 65 x 130mm	1305 gr	No
QB Twins 2L 4+4W	4 W + 4 W	9-32 Vdc	0,67A@12V / 0,34A@24V	65 x 65 x 145mm	1310 gr	No
QB Twins 2L 6+6W	6 W + 6 W	9-32 Vdc	1A@12V / 0,5A@24V	65 x 65 x 145mm	1310 gr	No

All QB technical sheets: IP40, wall installation, screw fixing, Ø 8 mm hole for the wires, constant voltage. Base and head in aluminium (steel on the Tower 2L 4+4W and Twins 2L 6+6W sheets).
Dimmable; recommended dimmer on the sheets: FASP094CA2A3D00 HDIM300 D00.

Photometric Data

Model	Light source	Light type	Warm white (2900–3100 K)	Day light (3800–4100 K)	Beam angle
QB Fixed 1L 6W	1 power LED	–	468 lm	508 lm	60°
QB Spin 1L 4W	1 power LED	One color	341 lm	387 lm	60°
QB Spin 2L 2+2W	2 LED	One color	190 lm	240 lm	45°
QB Swivel 1L 4W	1 power LED	One color	341 lm	387 lm	60°
QB Swivel 1L 6W	1 power LED	One color	468 lm	508 lm	60°
QB Tower 2L 4+4W	2 power LED	One color	682 lm	774 lm	60°
QB Tower 2L 6+6W	2 power LED	One color	935 lm	1015 lm	60°
QB Twins 2L 4+4W	2 power LED	One color	682 lm	774 lm	60°
QB Twins 2L 6+6W	2 power LED	One color	935 lm	1015 lm	60°

Luminous flux and beam angle as printed on each sheet.

TB316 Tower 2L Installation Sheet

Model	Power	Hole	Power supply
TB316 Tower 2L 4+4W IP65	8W	Ø 8 mm	9–32Vdc
TB316 Tower 2L 6+6W IP65	12W	Ø 8 mm	9–32Vdc

Bring the wires from the constant-voltage power supply (voltage as in the chart) to the panel.
Drill a Ø 8 mm (5/16") hole.
Undo the two grub screws with a 2,5 Allen key and lift the lighting body off the base.
Connect positive to the red wires and negative to the black wires. Test the light.
Fix the base to the panel with two screws (not supplied) with a suitable countersunk head, without crushing the wires stowed in the compartment at the back of the base.
Refit the lighting body with its pins in the seats of the base and lock it with the two grub screws.

The TB316 sheet gives IP65; the QB Tower technical sheets give IP40. The documents do not state whether they describe the same product.

Wiring

Use the unit in ultra-low voltage (SELV) with a constant-voltage LED power supply. Do not connect directly to the mains (AC).
More than one light: connect them in parallel. The power supply must deliver a wattage equal to or higher than the total of the lights connected.
Positive is the red wire, negative is the black wire.

Example from the TB316 sheet: two 12W lights on one Quick PSCV 30W 24V constant-voltage power supply.
Non-Quick power supplies may have a higher or lower inrush-current protection threshold, so the load may need different sizing because of the inrush current of the LED board at switch-on.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.