We Ship Worldwide! Shipping information.
INSTALLATION MANUAL

Installation and connection of the Quick QNN-DRV 4CH 700 (tunable white) and QNN-DRV 4CH 350 (RGBW) LED downlight drivers controlled by the LDIM BUS RGBW gateway, with the list of compatible QCC/QNN downlights and their cut-outs.

DocumentQuick QNN-DRV RGBW/TW LED Drivers User Manual
FormatPDF · 28 pages · 3.9 MB
LanguageEnglish
Download PDF ▾
Installation ManualPDF · 28 p.QNN-DRV 4CH 350 (RGBW)PDF · 28 p.
SpecificationsInstallationCompatible LightsProducts
Quick QNN-DRV RGBW/TW LED Drivers — User Manual

The Two Drivers

QNN-DRV 4CH 700 QNN-DRV 4CH 350
Drives Tunable white (TW) and white single-colour downlights RGBW downlights
Output 4 channels constant current, 700 mA max each 4 channels constant current, 350 mA max each
Max load 3 x 6W TW @ 12V; 6 x 6W TW @ 24V; 3 x 12W TW @ 24V 3 x 6W RGBW @ 12V; 6 x 6W RGBW @ 24V; 3 x 12W RGBW @ 24V
Input Power and control from the LDIM BUS RGBW through a 5-pole connector 5 constant voltage cables 10 ÷ 30 Vdc from the LDIM BUS RGBW
Operating / storage temperature +5°C to +50°C / –40°C to +70°C +5°C to +50°C / –40°C to +70°C
Humidity / housing 80% non-condensing / IP20, SELV 80% non-condensing / IP20, SELV
In the box Driver, 2 input connectors, RJ45 line terminator, warranty, manual Driver, 2 input connectors, RJ45 line terminator, warranty, manual

The module only works when coupled and correctly connected to a Quick LDIM BUS RGBW. The cover pages print "driver costant voltage", while the manuals describe constant-current outputs.

Mounting & Wiring

  • Mounts on a DIN rail; install on a vertical surface for ventilation, inside a protected distribution panel that unauthorised people cannot reach, away from rain, dust and humidity.
  • Always fit a fast-acting 3A fuse on the driver supply. Disconnect the power before installing or servicing.
  • Control signal cable (5-pole connector): max 100 metres (328'), max cross section 2.5mm².
  • Driver to lights: shielded CAT5e (FTP) Ethernet cable with RJ-45 male-to-male connectors (not supplied), max 25 metres (82') with RJ45 extensions; close the line with the RJ45 terminator.
  • Cleaning: damp cloth on the front only, no corrosive substances, no liquids on the unit; power off first.

Fitting the Downlights

  1. Drill the hole given in the table for your downlight.
  2. Connect it as in the wiring diagram and test that it works.
  3. Spring models: position the springs as shown and push the light into the hole. Screw models: fix it to the panel with self-tapping screws (not supplied).
  4. Press the frame onto the light. On the Chiara QNN the frame screws on clockwise.

Compatible QCC/QNN Downlights

Model Hole Model Hole
Kor XP LP 6W QCC/QNN Ø 65 mm Danae LP 6W QCC/QNN 90x90 mm
Kor XP HP QCC/QNN Ø 65 mm Danae HP 6W QCC/QNN 90x90 mm
Kai XP LP 6W QCC/QNN Ø 65 mm Danae LP 12W QCC/QNN 90x90 mm
Kai XP HP QCC/QNN Ø 65 mm Danae HP 12W QCC/QNN 90x90 mm
Blake XP LP QCC/QNN Ø 65 mm Cristian 6W QCC/QNN Ø 89 mm
Blake XP HP QCC/QNN Ø 65 mm Cristian 12W QCC/QNN Ø 89 mm
Marina XP LP QCC/QNN Ø 65 mm Kristine 6W QCC/QNN 90x90 mm
Marina XP HP QCC/QNN Ø 65 mm Kristine 12W QCC/QNN 90x90 mm
Apollo XP LP QCC/QNN Ø 65 mm Demetra 6W QCC/QNN 85x85 mm
Apollo XP HP QCC/QNN Ø 65 mm Demetra 12W QCC/QNN 85x85 mm
Daphne XP LP QCC/QNN Ø 65 mm Vanessa 6W QCC/QNN 90x85 mm
Daphne XP HP QCC/QNN Ø 65 mm Vanessa 12W QCC/QNN 90x85 mm
Zeus LP 6W QCC/QNN Ø 89 mm Venus 88 6W QCC/QNN Ø 65 mm
Zeus HP 6W QCC/QNN Ø 89 mm Chiara QCC/QNN Ø 65 mm
Zeus LP 12W QCC/QNN Ø 89 mm Zeus HP 12W QCC/QNN Ø 89 mm

Only the QCC/QNN versions of these lights work with these drivers; the standard versions are not listed.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual